ERNITEC Orion/2 User manual

Quick guide for ORION/2
1
Content
Page 1 Content
Page 2 Switch definition
Page 3 Communication switches settings.
Page 4 Dome ID settings.
Page 5 Dome control protocol
Page 6 22 PIN connector definition
Page 7 Using System X keyboard K111
Page 8 Using Ernitec keyboard M1501, M1503, M1504 and
M1505

Quick guide for ORION/2
2

Quick guide for ORION/2
3

Quick guide for ORION/2
4

Quick guide for ORION/2
5

Quick guide for ORION/2
6
No. Cable colour Pin Cable type
1 Black AC24-1 20AWG
2 Brown ALM NO 24AWG
3 Red AC24-2 20AWG
4 orange ALM NC 24AWG
5 Yellow FG 20AWG
6 Green ALM COM 24AWG
7 Blue Tx+
8 violet Rx-
9 Gray Tx+
10 White Rx+
24AWG
11 Black/white ISOG
12 Brown/white ALM-1
13 Reed/White ALM-3
14 orange/Black ALM-2
15 Yellow/Black ALM-4
16 Green/black ALM-5
17 Blue/white ALM-6
18 violet/Gray ALM-7
19 Black/grey ALM-8
20 White/black ALM GND
24AWG
21 Black screen) VGND
22 Red VIDEO
24AWG

Quick guide for ORION/2
7
Appendix B: Ernitec ERNA
The dome camera can be controlled by Ernitec systems via RS485.
The setup function is based on an On Screen Display (OSD) menu driven system.
Using System X Keyboards Series K111
To enter the menu system, press:
MENU
Use the joystick to navigate inside the menu system.
To enter a sub-menu or accept/select an entry, press:
MENU
To Exit select the EXIT OSD entry.
After a certain time of inactivity the menu system is left automatically.
Using System 1000M Keyboards 1501M/1503M/1504M or 1505M
To enter the menu system, press:
Use the joystick to navigate the menu system.
To enter a sub-menu or accept/select an entry, press:
?
To Exit select the EXIT OSD entry.
After a certain time of inactivity the menu system is left automatically.
?
1 2 8ESC
ÖÖÖÖor just:

Quick guide for ORION/2
8