ERNITEC SX Series User manual

Ernitec SX Box Camera
User’s Manual
Ver1.5
All manuals and user guides at all-guides.com
all-guides.com

1
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Caution and Preventive Tips
Handle with care, do not drop the unit
Mount the unit in an equipment rack or place it on a solid, stable surface
Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site
Do not place it in an area with poor ventilation or in an area close to fire or other sources of
heat. Doing so may damage the unit as well as cause fire or an electric shock
When cleaning is necessary, shut down the system and unplug the unit from the outlet
before uncovering the top cover. Do not use liquid cleaners or aerosol cleaners. Use only a
damp cloth for cleaning
Always shut down the system prior connecting or disconnecting accessories, with the
exception of USB devices
This symbol intends to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol intends to alert the user to the presence of unprotected “Dangerous
Voltage”within the product’s enclosure that may be strong enough to cause a
risk of electric shock.
All manuals and user guides at all-guides.com

2
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
Important Information
Before proceeding, please read and observe all instructions and warnings in this manual.
Retain this manual with the original bill of sale for future reference and, if necessary, warranty
service. When unpacking your unit, check for missing or damaged items. If any item is missing,
or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
All manuals and user guides at all-guides.com

3
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Table of Contents
1. Overview................................................................................................................................4
1.1 Features......................................................................................................................4
1.2 Package Contents .......................................................................................................5
1.3 Dimensions..................................................................................................................5
1.4 Connectors..................................................................................................................6
2. Camera Cabling.....................................................................................................................7
2.1 Connect Power............................................................................................................7
2.2 Connect Ethernet Cable...............................................................................................7
2.3 Lens Mounting.............................................................................................................8
2.4 Connect Alarm I/O.......................................................................................................8
2.5 Connect RS485 (for DC12V/AC24V/PoE Model).........................................................8
3. System Requirements ..........................................................................................................9
4. Access Camera ...................................................................................................................10
5. Setup Video Resolution......................................................................................................13
6. Configuration File Export/ Import ......................................................................................14
Appendix A: Technical Specifications ......................................................................................15
Appendix B: Delete the Existing DC Viewer..............................................................................19
Appendix C: Setup Internet Security.........................................................................................20
Appendix D: Back Focus Adjustment .......................................................................................21
Appendix D: Video Resolution...................................................................................................22
2M- Quad Streams................................................................................................................22
2M- Triple Streams................................................................................................................26
2M- Dual Streams.................................................................................................................28
2M- Single Stream ................................................................................................................28
2M Real time / 3M / 5M- Quad Streams................................................................................29
2M Real time / 3M / 5M- Triple Streams................................................................................34
2M Real time / 3M / 5M- Dual Streams..................................................................................37
2M Real time / 3M / 5M- Single Stream.................................................................................38
All manuals and user guides at all-guides.com

4
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
1. Overview
Supported with both H.264 and MJPEG standard, the product series not only
features in superior Full HD resolution for real-time streaming at 25/30 fps, but
also supplies D1 Real-time streaming. With more computing power, the IP
Camera could provide more flexibility for users and system managers.
1.1 Features
Progressive Scan CMOS Sensor
2M / 3M / 5M Resolution*
C / CS Mount Lens
Quad Streams support
Dual Streams, Full HD 1080P real-time + D1 real-time
Dual Streams Compression:
H.264 Baseline / Main / High Profile + MJPEG
Multi-language support
Tampering Alarm
Wide Dynamic Range
Motion Detection
Privacy Masks
Smart Picture Quality / 3D Noise Reduction
Vertical View Mode (Image rotation by 90 degrees)
Smart IR Mode
Network Failure Detection
Day / Night (ICR)
Auto Iris Lens support
Micro SD support
BNC Analog Output
RS-485 support*
ONVIF Support
All manuals and user guides at all-guides.com

5
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
1.2 Package Contents
Please check the package contains the following items listed below.
Full HD Multiple Streams
IP Camera
Back focus adjuster
CD
(bundled software and
documentation)
Quick Guide
1.3 Dimensions
The IP Camera’s dimensions are shown below.
All manuals and user guides at all-guides.com
all-guides.com

6
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
1.4 Connectors
The diagram below shows the IP Camera’s reset button and various connectors.
Definition for each connector will be given as follows.
DC 12V/ AC 24V/ PoE
C/CS Mount Lens Motorized Lens
No.
Definition
Remarks
1
LINE OUT & LINE IN / MIC IN
Two-way audio transmission
2
Power LED
Power connection indication (green light)
3
Reset button
Reset to factory default
4
AUTO IRIS connector
Auto iris lens connector
5
NETWORK (with PoE)
RJ-45 connector
6
Network LEDs
Network connection and activity indication
7
Alarm I/O
1
Output+
5
GND
2
Output-
6
D-
3
Input+
7
D+
4
Input-
8
VIDEO (BNC connector)
For video output
9
Micro SD Card slot
For video recording storage
10
AC 24V/DC 12V connector
(AC 24V Model)
＋
AC 24V: Power-1
DC 12V: Power
LINE
OUT
LINE IN
MIC IN
NETWORK
AUTO
IRIS
PoE
1 2 3 4 I/O
DC VIDEO
AC 24V
DC 12V
AC 24V: Earth GND
DC 12V: Reserved
－
AC 24V: Power-2
DC 12V: GND
Reset
Button
Power
LED
Network LEDs
Reset
Button
Power
LED
Network LEDs
All manuals and user guides at all-guides.com

7
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
2. Camera Cabling
Please follow the instructions below to complete IP Camera installation.
2.1 Connect Power
Please refer to Section: Connectors. Alternatively, connect the Ethernet cable to
the camera’s PoE port and plug the other end of the cable into a PoE switch.
NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in
use in the network.
2.2 Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to
have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the IP Camera,
and the other end of the cable to the network switch or PC.
NOTE: In some cases, you may need use an Ethernet crossover cable
when connecting the IP Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs; if the LEDs are
unlit, please check LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
All manuals and user guides at all-guides.com

8
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
2.3 Lens Mounting
If use C-Mount lens, after removing the camera’s plastic cover, users need to
mount the C/CS mount adapter to the camera. Then attach the lens onto the
C/CS mount adapter, as the illustrations shown below.
C/CS Mount Adapter
Completion
2.4 Connect Alarm I/O
The camera equips one alarm input and one relay output for alarm application.
Refer to alarm pin definition below to connect alarm devices to the IP Camera if
needed.
DC 12V/ PoE
PIN 1: Output+
PIN 2: Output-
PIN 3: Input+
PIN 4: Input-
DC 12V/ AC 24V/ PoE
2.5 Connect RS485 (for DC12V/AC24V/PoE Model)
The RS-485 connector is the interface for connecting with the pan & tilt
positioning system.
PIN 6: D-
PIN 7: D+
All manuals and user guides at all-guides.com

9
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
3. System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good
network connection, and meet system requirements as described below.
Items
System Requirement
Personal Computer
1. Intel® Pentium® M, 2.16 GHz or
Intel® CoreTM2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System
Windows VISTA/ Windows XP/ Windows 7
Web Browser
Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer
ActiveX control plug-in for Microsoft IE
All manuals and user guides at all-guides.com

10
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
4. Access Camera
For initial access to the IP Camera, users can search the camera through the
installer program: DeviceSearch.exe, which can be found in “DeviceSearch”
folder in the supplied CD.
Device Search Software Setup
Step 1: Double click on the program Device Search.exe. After its window
appears, click on the <Device Search> button on the top side.
Step 2: The security alert window will pop up. Click on <Unblock> to continue.
Device Search
Step 3: Click on <Device Search> again, and all the finding IP devices will be
listed in the page. The IP Camera’s default IP address is:
192.168.0.250.
Step 4: Double click or right click and select <Browse> to access the camera
directly via web browser.
Step 5: Then the prompt window of request for entering default username
and password will appear for logging in to the IP Camera.
The default login ID and password for the Administrator are:
Login ID
Password
Admin
1234
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be
altered for the security concerns. Refer to Full HD Multiple
Streams IP Camera Menu Tree for further details.
All manuals and user guides at all-guides.com
all-guides.com

11
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Additionally, users can change the IP Camera’s network property, either DHCP
or Static IP, directly in the device finding list. Refer to the following section for
changing the IP Camera’s network property.
Example of Changing IP Camera’s Network Property
Users can directly change an IP Camera’s network property, ex. from static IP to
DHCP, in the finding device list. The way to change the IP Camera’s network
property is specified below:
Step 1: In the finding device list, click on the IP Camera that you would like to
change its network property. On the selected item, right click and
select “Network Setup.”Meanwhile, record the IP Camera’s MAC
address, for future identification.
Step 2: The “Network Setup”page will come out. Select “DHCP,”and press
“Apply”button down the page.
Step 3: Click on <OK> on the Note of setting change. Wait for one minute to
re-search the IP Camera.
Step 4: Click on the <Device Search> button to search all the devices. Then
select the IP Camera with the correct MAC address. Double click on
the IP Camera, and the login window will come out.
Step 5: Enter User name and Password to access the IP Camera.
Installing DC Viewer Software Online
For the initial access to the IP Camera, a client program, DC Viewer, will be
automatically installed to your PC when connecting to the IP Camera.
If the Web browser doesn’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Section: Setup Internet Security) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser. Right
click on the Information Bar and select <Install ActiveX Control…> to allow the
installation.
All manuals and user guides at all-guides.com

12
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
The download procedure of DC Viewer software is specified as follows.
Step 1: In the DC Viewer installation window, click on <Next> to start
installation.
Step 2: The status bar will show the installation progress. After the installation
is completed, click on <Finish> to exit the installation process.
Step 3: Click on <Finish> to close the DC Viewer installation page.
Once the DC Viewer is successfully installed, the IP Camera’s Home page will
be able to correctly display as the figure below.
Image and Focus Adjustment
The image displays on the Home page when successfully accessing to the IP
Camera. Adjust zoom and focus as necessary to produce a clear image.
Note: Please refer to Full HD Multiple Streams IP Camera Menu Tree
for more button function detail.
All manuals and user guides at all-guides.com

13
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
5. Setup Video Resolution
Users can setup Video Resolution on Video Format page of the user-friendly
browser-based configuration interface.
Video Format can be found under this path: Streaming> Video Format.
The default value of Video Resolution is as below:
2M
H.264- 1920 x 1080 (15 fps) + H.264- 1280 x 720 (30 fps)
2M Real time
H.264- 1920 x 1080 (30 fps) + H.264 720 x 480 (30 fps)
3M
5M
For more Video Resolution combination detail, please refer to Appendix: Video
Resolution. Click on <Save> to confirm the setting.
All manuals and user guides at all-guides.com

14
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
6. Configuration File Export/ Import
To export/ import configuration files, users can access the Maintenance page on
the user-friendly browser-based configuration interface.
The Maintenance setting can be found under this path: System> Maintenance.
Users can export configuration files to a specified location and retrieve data by
uploading an existing configuration file to the IP Camera. It is especially
convenient to make multiple cameras having the same configuration.
Export
Users can save the system settings by exporting the configuration file (.bin) to a
specified location for future use. Click on the <Export> button, and the popup
File Download window will come out Click on <Save> and specify a desired
location for saving the configuration file.
Upload
To copy an existing configuration file to the IP Camera, please first click on
<Browse> to select the configuration file, and then click on the <Upload> button
for uploading.
All manuals and user guides at all-guides.com

15
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Appendix A: Technical Specifications
Camera
2M
2M Real time
Image Sensor
1/2.7” Progressive CMOS
Effective Pixels
1920(H) x 1080(V)
Minimum Illumination
0.2 lux (Color)
0.02 lux (B/W)
White Balance
Manual / AWB/ ATW
Shutter Speed
1~ 1/10000 sec.
Lens
Lens
C / CS Mount
Operation
Multiple Languages
English / French / German / Italian / Korean / Simplified Chinese /
Traditional Chinese / Russian
Image Setting
Backlight Compensation
On / Off
White Balance
Auto / Manual
Noise Reduction (3D)
On / Off
Wide Dynamic Range
On / Off
Privacy Mask
On / Off
Brightness
Manual
Exposure
Auto / Manual
Sharpness
Manual
Contrast
Manual
Saturation
Manual
Hue
Manual
Digital Zoom
Support
Motion Detection
On / Off
Privacy Mask Type
Color
ICR*
Auto / On / Off / Smart
Tampering Alarm
On / Off
Audio
Two-way Audio
Line out, Line in / Mic in
Compression
G.711 / G.726
Network
Interface
RJ-45, 10/100 Mbps Ethernet
Video Compression
H.264 / MJPEG
Video Streaming
Dual Streams- H.264 + H.264 / MJPEG
Quad Streams- H.264 + H.264 + H.264 + H.264/ MJPEG
Video Resolution
H.264- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
MJPEG- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
Protocol
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP,
DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security
HTTPS / IP Filter / IEEE 802.1x
Alarm
Input
1 Set
5V 10kΩ pull up
Output
1 Set
Photo Relay Output 300V DC/AC
Event Notification
HTTP / FTP / SMTP
Micro SD
microSDHC 32GB support
Supported Web Browser
Internet Explorer (6.0+) / Chrome / Firefox / Safari
User Account
20
Password Levels
User and Administrator
Mechanical
Lens Mounting
C / CS Mount
LED Indicator
Power / Link / ACT
Connectors
Auto Iris
DC Drive
Alarm
4 Pin Terminal Block, Pitch 3.5 mm
Power
DC jack
Ethernet
RJ-45
Analog Video
1.0 Vp-p / 75 Ω, BNC
RS-485*
D+, D-
Audio
Stereo Phone Jack, ∅3.5 mm
All manuals and user guides at all-guides.com
all-guides.com

16
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
General
Operating Temperature
-10°C ~ 50°C (14°F ~ 122°F)
Humidity
10% ~ 90%, No Condensation
Dimension
125 x 82 x 52 mm (L x W x H) w/o Lens
Weight
330 g (0.73 lb)
Power Source
DC 12V / PoE
DC 12V / AC 24V / PoE
Power Consumption
4W
Regulatory
CE / FCC / RoHS
(*) Optional
All manuals and user guides at all-guides.com

17
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Camera
3M
5M
Image Sensor
3M Sony Progressive CMOS
5M Progressive CMOS
Effective Pixels
2048(H) x 1536(V)
2592(H) x 1944(V)
Minimum Illumination
0.2 lux (Color)
0.02 lux (B/W)
White Balance
Manual / AWB/ ATW
Shutter Speed
1~ 1/10000 sec.
Lens
Lens
C / CS Mount
Operation
Multiple Languages
English / French / German / Italian / Korean / Simplified Chinese /
Traditional Chinese / Russian
Image Setting
Backlight Compensation
On / Off
White Balance
Auto / Manual
Noise Reduction (3D)
On / Off
Wide Dynamic Range
On / Off
Privacy Mask
On / Off
Brightness
Manual
Exposure
Auto / Manual
Sharpness
Manual
Contrast
Manual
Saturation
Manual
Hue
Manual
Digital Zoom
Support
Motion Detection
On / Off
Privacy Mask Type
Color
ICR*
Auto / On / Off / Smart
Tampering Alarm
On / Off
Audio
Two-way Audio
Line out, Line in / Mic in
Compression
G.711 / G.726
Network
Interface
RJ-45, 10/100 Mbps Ethernet
Video Compression
H.264 / MJPEG
Video Streaming
Single Stream- 2048 x 1536
Single Stream-
2592 x 1944 / 2048 x 1536
Dual Streams- H.264 + H.264 / MJPEG
Quad Streams- H.264 + H.264 + H.264 + H.264/ MJPEG
Video Resolution
H.264- 2048 x 1536 (3M)
H.264- 2592 x 1944 (5M) /
2048 x 1536 (3M)
H.264- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
MJPEG- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
Protocol
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP,
DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security
HTTPS / IP Filter / IEEE 802.1x
Alarm
Input
1 Set
5V 10kΩ pull up
Output
1 Set
Photo Relay Output 300V DC/AC
Event Notification
HTTP / FTP / SMTP
Micro SD
microSDHC 32GB support
Supported Web Browser
Internet Explorer (6.0+) / Chrome / Firefox / Safari
User Account
20
Password Levels
User and Administrator
Mechanical
Lens Mounting
C / CS Mount
LED Indicator
Power / Link / ACT
Connectors
Auto Iris
DC Drive
Alarm
4 Pin Terminal Block, Pitch 3.5 mm
Power
DC Jack
Ethernet
RJ-45
Analog Video
1.0 Vp-p / 75 Ω, BNC
RS-485*
D+, D-
Audio
Stereo Phone Jack, ∅3.5 mm
All manuals and user guides at all-guides.com

18
v.1.5.0912
www.ernitec.com
Ernitec SX Box Camera Series User’s Manual
General
Operating Temperature
-10°C ~ 50°C (14°F ~ 122°F)
Humidity
10% ~ 90%, No Condensation
Dimension
125 x 82 x 52 mm (L x W x H) w/o Lens
Weight
330 g (0.73 lb)
Power Source
DC 12V / PoE
DC 12V / AC 24V / PoE
Power Consumption
3.7 W
4 W
Regulatory
CE / FCC / RoHS
(*) Optional
All manuals and user guides at all-guides.com

19
www.ernitec.com
v.1.5.0912
Ernitec SX Box cameraSeries User’s Manual
Appendix B: Delete the Existing DC Viewer
For users who have installed the DC Viewer in the PC previously, please first delete the
existing DC Viewer from the PC before accessing to this IP Camera.
Deleting the DC Viewer
In the Windows <Start Menu>, activate <Control Panel>, and then double click on <Add or
Remove Programs>. In the <Currently installed programs> list, select <DCViewer> and
click on the button <Remove> to uninstall the existing DC Viewer.
Deleting Temporary Internet Files
To improve browser performance, it is suggested to clean up the all the files in the
Temporary Internet Files.
The procedure is as follows:
Step 1: Click on the <Tools> tab on the menu bar and select <Internet Options>.
Step 2: Click on the <Delete> button under <Browsing history> section. Then click on the
<Delete Files> button under the <Temporary Internet files> section.
Step 3: A confirmation window will pop up. Click on <Yes> to start deleting the files.
All manuals and user guides at all-guides.com