ESI FlexCharge3 FCH3-DSK-BLK Parts list manual

Assembly and operation instructions
FlexCharge3™
Model # FCH3-DSK-WHT
Model # FCH3-DSK-BLK
Personal desktop power

Page 2
FlexCharge3

Page 3
FlexCharge3 Safety instructions/warnings
Please review these instructions before beginning the installation. Check that all parts and tools needed
were provided with your order (see illustration on following page). Contact your supplier if any parts are
missing. Do not discard the packaging until content that the product operates to your satisfaction.
Safety instructions/warnings
Always read the safety instructions carefully.
• Do not install near heat sources such as radiators, heat registers, stoves or
other equipment (including amplifiers) that produce heat.
• Unplug the unit during lightning storms or when unused for extended
periods of time.
• To reduce the risk of fire or electric shock, do not expose this unit to rain or
moisture, including any drips or splashes.
• Objects filled with liquids such as vases, should never be placed on or near
the unit.
• Do not open the unit due to risk of electric shock hazard.
• The outlet used to power the unit should be easily accessible and located
near the equipment.
• The unit is for indoor use only.
• Please refer to the marking label on the unit for input and output ratings. Do
not overload the power supply.
• DO NOT USE this unit in life support applications where failure of the unit can
reasonably be expected to cause the failure of the life support equipment or
to significantly aect its safety or eectiveness.
• DO NOT USE this unit in the presence of a flammable anesthetic mixture with
air, oxygen or nitrous oxide.
• Failure to adhere to these instructions eectively voids the warranty.

FlexCharge3 Parts and tools
Parts provided
power outlets
USB charging port
bracket/clamp assembly (1)power module (1)
M3x12 panhead
screw (2)
Phillips screwdriver (1)
Important: hand-tighten screws only.

Page 5
FlexCharge3 Edge mount
Edge mount
With edge mounts, the product is clamped to the edge of the worksurface.
There is only one way to mount the FlexCharge3 power module:
• Edge mount

Page 6
FlexCharge3 Edge mount
Step #2: clamp assembled FlexCharge3 to worksurface
• Position the FlexCharge3 in the desired location and clamp it securely
to the worksurface by tightening the triangle knob.
• Plug the power cord into an AC outlet.
Step #1: attach bracket/clamp assembly to power module
• Route the power cord through the opening in the
top bracket.
• Attach the top bracket to the rear of the power module using the two M3x12
panhead screws. Tighten securely using tools provided.
clamp
bottom
bracket
M3X12
power module
top
bracket
worksurface
triangle knob

Page 7
FlexCharge3 Additional features
Additional Features
• FlexCharge3 complies with UL 962A Standard for Furniture Power Distribution Units and meets
respective spill test criteria.
• AC outlet orientation can be rotated to accommodate large plugs
3.1 amp USB quick charging module can charge one tablet and one smart phone at the same time.

Page 8
LIMITED WARRANTY
ESI warrants this product to be free from defects in manufacturing for a period of five year from the date of original purchase.
This warranty extends only to the original purchaser, and does not apply if the product has been damaged or fails to function
properly as a result of misuse, abuse, modification, alteration, or improper cleaning or maintenance. This warranty does
not apply to damage in shipment caused by carriers, damage caused during installation, normal wear and tear, or excessive
use (meaning consistent use in excess of an eight hour shift). ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL RETAIL PURCHASE.
ESI’s sole obligation under this warranty or any implied warranty, and the purchaser’s sole remedy, is limited to the repair
or replacement, at ESI’s option, of the product or any defective part. Costs (such as installation, labor fees or express
shipping) incurred due to replacement of products are not covered under warranty. IN NO EVENT SHALL FELLOWES, ITS
AFFILIATES, SUBSIDIARIES, RELATED ENTITIES OR THEIR RESPECTIVE OFFICERS, DIRECTORS, OR EMPLOYEES, BE LIABLE
FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR SPECIAL DAMAGES.
To make a warranty claim, contact ESI at 800-833-3746 or [e-mail]. You must provide proof of
purchase, such as the original purchase order number.
The duration, terms and conditions of this warranty are valid worldwide, except where dierent limitations, restrictions or
conditions may be required by local law.
FCH3-DSK Rev A 7/2019© 2019 Fellowes, Inc.
FlexCharge3™
Personal desktop power
Please contact Customer Service with any
questions or comments at 800.833.3746
or visit our website at esiergo.com