ETEKCITY EK6314-T User manual

Digital Kitchen Scale
Model No.: EK6314-T
Questions or Concerns?
[phone]
[e-mail]

Thank You.
Thank you for purchasing the Digital Kitchen Scale by Etekcity. We are dedicated to providing our
customers with quality products to build on better living. Should you have any questions or concerns about
using your new product, feel free to reach out to our helpful customer support team at [phone] or by
email at [e-mail]. We hope you enjoy your new product!

Table of Contents
Safety Information 4
Function Diagram 5
Set-up 6
Operation 7
Troubleshooting 10
Specifications 11
Warranty 12
Customer Support 14

Safety Information
IMPORTANT: Please read and comply with all of the
instructions and warnings provided in this manual
before using the product. Failure to comply with
the instructions and warnings provided herein may
result in inaccurate results and/or damage to the
product itself.
• Always place the scale on a hard, dry, and flat
surface before measurement in order to ensure
accurate results.
• Dirt, dust, vibration, wind, air currents, and
electromagnetic interference may contribute to
inaccurate results.
• DO NOT exceed the 11 lb (5 kg) weight capacity;
doing so may damage the scale. An overload
indicator will appear on the LCD display if the
limit is exceeded.
• Avoid exposing the device to damp environments
or extreme temperatures.
• DO NOT immerse the scale in water or corrosive
liquids. If a liquid is spilled on the digital display
or buttons, immediately wipe the scale clean with
a soft cloth in order to avoid potential internal
damage.
• When replacing batteries, make sure to insert
them under the correct polarity as indicated
within the battery compartment.
• If the low battery indicator is displayed, please
replace the batteries.
• DO NOT mix new and used batteries to power the
device.
• This scale is not intended for commercial or
heavy-duty use.
• Handle the scale with care. Keep the scale in a
cool, dry environment.
• If the scale fails to turn on, check if the batteries
are installed correctly. Replace the batteries if
necessary.
• If the scale is not in use for an extended period
of time, remove the batteries to extend the scale
service lifetime.
4

Function Diagram
1. LCD Display
2. UNIT Button
3. ON/OFF/TARE Button
4. Battery Compartment
5
12
4
3

Set-Up
NOTE: The positive side of the battery should be
facing up.
6
The included CR2032 Lithium batteries are preinstalled in the scale. Open the battery compartment
cover located on the backside of the scale and remove the plastic strip from the battery
compartment to allow the batteries to power the device. Reapply the battery compartment cover.

Operation
1. Place the scale on a flat, dry surface.
2. Press to turn on the scale.
3. Press UNIT to select your desired measuring unit.
Then wait until the screen displays zero before
measuring.
4. Gently place your desired object in the center of
the weighing platform. The LCD display will
automatically display the object’s weight.
5. Hold down for 2 seconds to turn off the
scale.
NOTE: The scale with automatically turn off after
one minute of inactivity.
7
NOTE: If the screen does not display zero
automatically, press the ‘ ’ button to
auto-adjust to zero.

Tare Function
The tare function allows you to measure objects
in a container without the having to include the
container’s weight in the final measurement.
1. Place the scale on a flat, dry surface.
2. Power on the scale and wait for the display to
read zero.
3. Place an empty container on the scale and press
. The display will now show zero.
8

4. Place objects in the container, and the display will
show the net weight of the items.
5. Take all items off the scale; the display will show
the weight of the container with
a negative weight.
6. When this happens, press and the display will
clear to zero.You are now ready to weight another
object
7. If you are finished using the scale you can turn off
the
scale by holding down or allow the scale to
automatically turn off.
Maintenance
Use a slightly damp cloth to clean the surface of
the scale, followed by a dry soft cloth to wipe away
the remaining moisture. You can also use a dry soft
cloth to wipe off any dust that may be on the scale.
Be sure not to wash the device or immerse it in
water or any other liquids. 9

Troubleshooting
Problem Cause Solution
LCD display is dim or shows: Not enough power. Replace batteries.
Device does not turn on. Batteries are exhaust Replace batteries.
Batteries not inserted correctly. Insert batteries under the correct polarity
as marked on battery compartment.
Weight exceeds 11lbs (5kg). Promptly remove object from scale to
protect its senors. Use a different scale
with a higher weight range.
Objects exceeding 1000g are on
top of scale before it is turned
on.
Remove objects from scale, wait until
display reads zero before weighing.
Measurement is not
accurate or display is
showing:
Weight is unstable when turning
scale on.
Keep weight stable when turning on scale.
10