ETEKCITY ESF17 User manual

Questions or Concerns? • [phone] • [e-mail]
Smart Fitness Scale
Model No.: ESF17

Thank You.
Thank you for purchasing the ESF17 Smart Fitness
Scale by Etekcity. We are dedicated to providing our
customers with quality products for building a better
living. Should you have any questions or concerns
about using your new product, feel free to reach out
to our helpful customer support team at (855) 686-
3835 or by email at [e-mail]. We hope
you enjoy your new product!

Table of Contents
Safety Information 4
Function Diagram 6
Setup 7
Operation 9
Without VeSyncFit App 9
With VeSyncFit App 10
Pairing 10
Viewing Reports 12
Set/Delete Reference Data 13
Share Progress 14
Add/Delete Users 16
Connecting Other Apps 19
Apple Health 19
Google Fit 20
Fitbit 22
Maintenance 24
Troubleshooting 26
Specifications 28
Warranty 29
Customer Support 30
Package Contents
1 x Smart Fitness Scale
4 x 1.5V AAA Batteries
1 x User Manual

Safety Information
IMPORTANT: Please read and comply with all
of the instructions and warnings provided in this
manual before using the product. Failure to comply
with the instructions and warnings provided herein
may result in inaccurate results and/or damage to
the product itself.
General Safety
• This scale should not be used to diagnose or treat
any medical condition. Consult your primary care
physician before making changes to your diet,
exercise plans, or physical activities.
• If you are pregnant, have a pacemaker, or other
internal device, you should not heavily rely on the
data provided by this product. Please note that
all data should be used as a reference and is not
a substitute for medical advice from a licensed
healthcare professional.
• Check the scale before each use. Do not use the
scale if it is damaged in anyway.
• The glass platform is slippery when wet. Make
sure the platform and feet are dry before stepping
on for measurement.
4

Use & Care
• This scale is not intended for commercial use.
• Always place the scale on a hard, flat surface
before measurement.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale.
• DO NOT strike or drop the scale.
• DO NOT stand on the edge of the scale or jump
on it.
• DO NOT stand on the scale platform for a
prolonged period of time or when not in weighing
operation.
• DO NOT store or operate near heat sources or in
humid environments.
• Handle the scale with care, as it is a precision
instrument.
• Clean the scale with a damp and dry cloth and
avoid getting water or any other liquid inside the
scale.
• DO NOT use chemical or abrasive cleaning agents
to clean the scale.
• Keep the scale in a cool environment with dry air.
• Always keep the scale in a horizontal position, do
not store vertically.
• If the scale fails to turn on, check whether the
batteries are installed correctly. Replace the
batteries if necessary.
• If an error appears on the display or if the scale
does not turn off automatically, remove the
batteries for 3 seconds, then reinstall them.
• DO NOT overload the scale (maximum weight
capacity: 400 lb / 180 kg).
• DO NOT mix new and used batteries or different
battery brands to power the scale.
• If the scale is not in use for an extended period
of time, remove the batteries to ensure battery
conservation and to extend the scale service
lifetime.
5

Main Functions
1
4
3
6
1. Weighing Platform
2. Display
3. Anti-skid Padding
4. Battery Compartment
2

7
Set-Up
Before First Use
Open the battery compartment and remove the
plastic film from the four AAA 1.5V batteries. Install
the batteries under the correct polarity and replace
the battery compartment cover.
Slide
1.5v - AAA
1.5v - AAA
1.5v - AAA
1.5v - AAA

VeSyncFit
To view more in depth weight analyses, download
the free VeSyncFit app from the App Store or
Google Play Store. You can also scan the QR code(s)
below.
8

Operation
Weighing without the VeSyncFit App
1. Place the scale on a hard, flat surface.
2. Step onto the scale. The scale will automatically turn
on and start measuring your weight.
3. Keep standing on the scale until the digits on the
screen flash 3 times with your final measurement.
NOTE: To change weight units, you must download
the VeSyncFit app and select the desired weight unit in
the Settings menu (see page 18).
9

10
Weighing with the VeSyncFit App
Pairing the Scale with VeSyncFit
1. Turn on Bluetooth on your smartphone.
NOTE: For Android users, Location and
Bluetooth must be turned on for Android 6.0 and
higher.
2. Tap ‘+’ on the measuring page to discover the
scale.

11
3. Step onto the scale with bare feet, then add the
device named “ESF17.”
4. Keep standing on the scale for 5-10 seconds.
Pairing is successful when your final weight
measurement appears on the VeSyncFit app.
NOTE: If you see a series of zeros flash across
the display of your scale, it means that the scale
is sending measurement data to the VeSyncFit
app.

Viewing Reports & Setting/Deleting References
1. Tap ‘Trend’ to view your progress history. You
can select your progress for the week, month,
or year.
12

2. To view data for a specific day, tap the ‘ ‘ at
the top right corner of the screen.
13
3. Tap ‘Data Select’ to select dates to view data
from a specific time frame.

14
Share Progress
While viewing the History page, you are able to
share your data through social media or text
message.
Note: You can also access the History page by
tapping the data directly below the weight display
circle on the home page.

15
1. On the History page, select the desired data you
wish to share.
2. Tap ‘ ’ on the bottom left corner of the screen
to share your data on Facebook, Instagram, or
text message.

16
Adding/Deleting Users
1. On the Measurement page, tap ‘My Account’ at
the bottom of the screen.

17
2. To add new users, tap ‘ .’ 3. Swipe left on the account that you want to
delete and tap ‘Delete.’

18
Settings
1. To access the Settings menu tap ‘My Account.’
2. Tap ‘ .’
3. You can change the app theme, set goal weights,
change weight units, select sounds, select
languages, and reset your password on the
Settings menu.

19
Connecting with Other Fitness Apps
Apple Health
1. Open the Health App on your iPhone then tap
‘Sources.’ Be sure to turn on your Bluetooth
setting.
2. Select ‘VeSyncFit’ from the list.
3. Turn on all categories to allow the VeSyncFit app
to work.

20
Google Fit
1. Access the Settings menu by tapping ‘ ’ on
VeSyncFit. Select ‘Google Fit’ from the menu.
2. Turn on Google Fit, then sign into your Google
Account. You will automatically be redirected to
the Google Fit page.