Eterna POLY10 User manual

These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Model:
POLY10 / POLY20 / POLY30
10W / 20W / 30W Polycarbonate LED Floodlights
INSTALLATION INSTRUCTIONS
A guide for qualied electricians
Pack contents:
1 x LED oodlight
complete with 2 core
1.0mm2x 0.8m silicone
cable and quick x
mounting bracket
Issue 2015
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: [email protected].uk
Visit our website:
www.eterna-lighting.co.uk
1M
Made in China
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” eective August 2005—UK
WEEE Regulations eective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specic
instructions regarding individual installations.
LAMP SPECIFICATIONS: 10W 20W 30W
Lumens total ux 800 lm 2000 lm 3000 lm
Lumens 120° ux 750 lm 1870 lm 2800 lm
Rated Wattage 9.3W 19.9W 30W
Rated luminous ux 900 lm 2000 lm 3000 lm
Nominal life time of the lamp 25,000 hrs 25,000 hrs 25,000 hrs
Colour temperature 4000K 4000K 4000K
Number of switching cycles
before premature lamp
failure
15,000 15,000 15,000
Warm-up time up to 60 % of
the full light output Instant full light Instant full light Instant full light
Dimmable No No No
LED array dimensions (L/W) 42 x 22mm 60 x 30mm 77 x 33mm
Nominal beam angle 120° 120° 120°
Rated power 9.3W 19.9W 30W
Rated lamp lifetime 25,000 hrs 25,000 hrs 25,000 hrs
Lamp power factor >0.9 >0.9 >0.9
Lumen maintenance factor at
end of nominal life ≥70% ≥70% ≥70%
Starting time <0.5s <0.5s <0.5s
Colour rendering >65 >65 >65
Colour consistency Within 6 step
Macadam ellipse
Within 6 step
Macadam ellipse
Within 6 step
Macadam ellipse
Rated peak intensity 326cd 852cd 1300cd
Voltage 230V 230V 230V
Not suitable for accent lighting
10W
20W
30W
TRADE
PRODUCT:
ENERGY
INFORMATION
AVAILABLE ON
APPLICATION

READ THIS FIRST:
Check the pack and make sure you have all of the
parts listed on the front of this booklet. If not,
contact the outlet where you bought this product.
This product contains glass, care must be taken when
assembling, tting or handling to prevent personal
injury or damage to the product.
This light tting must be installed by a competent
person in accordance with the current building
and IEE wiring regulations.
As the buyer, installer and/or user of this product it
is your own responsibility to ensure that this tting
is t for the purpose for which you have intended
it. Eterna Lighting cannot accept any liability for
loss, damage or premature failure resulting from
inappropriate use.
This product is designed and constructed according
to the principles of the appropriate British Standard.
Using this tting in an environment where there
is prolonged periods of use or higher than normal
ambient temperatures, may result in a shortened
working life.
Switch o the mains before commencing installation
and remove the appropriate circuit fuse or lock o
MCB.
This unit is suitable for outdoor use.
This product is suitable for installation on surfaces
with normal ammability e.g. wood, plasterboard
and masonry. It is not suitable for use on highly
ammable surfaces (e.g. polystyrene, textiles).
Before making xing hole(s), check that there are no
obstructions hidden beneath the mounting surface
such as pipes or cables.
Make sure that the xings are strong enough to
support the considerable weight of the tting and
hold it rigidly.
The lamp must be positioned so that there is at
least 1M (1000mm) between the luminaire and any
illuminated surface. Floodlights should be positioned
well away from ammable materials.
Do not attach to surfaces which are damp, freshly
painted or otherwise electrically conductive
(e.g. metallic surfaces).
This product is designed for permanent connection
to xed wiring: this must be a suitable circuit
(protected with the appropriate MCB or fuse).
When making connections ensure that the terminals
are tightened securely and that no strands of wire
protrude. Check that the terminals are tightened
onto the bared conductors and not onto any
insulation.
This product is double insulated. DO NOT CONNECT
ANY PART TO EARTH.
This product is not intended to be used by children
and persons with sensory, physical and/or mental
impairments that would prevent them from using it
safely.
IMPORTANT - if the external exible cable of this
luminaire is damaged it shall be exclusively replaced
by a qualied engineer.
You are advised at every stage of your installation to
double-check any electrical connections you have
made. After you have completed your installation
there are electrical tests that should be carried out,
these tests are specied in the current IEE wiring and
building regulations.
Do not carry or lift the oodlight by the mains
supply cable.
LAMP REPLACEMENT:
This luminaire has a sealed LED lamp and is
maintenance free, no lamp replacement is required.
CLEANING:
Clean this light tting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
INSTALLATION:
1. Choose the location for your new light tting
giving considerations to the points listed opposite.
2. Isolate mains.
3. Using the bracket, mark xing points and drill
xing holes, according to your chosen xing
method (Fixings not included). See diagrams
opposite for marking measurements.
4. Terminate loose ends of wire to an appropriate IP
rated junction box or similar, ensuring the Live and
Neutral polarities are observed.
Live - Brown / Red
Neutral - Blue / Black
The oodlight is supplied pre-wired but also
has a 2-way terminal block in the housing.
5) If wiring direct in to the tting re-t the terminal
block, tighten the cable restraint clamp, tighten
the gland nut and re-t the cover.
6. Restore power and test the luminaire.
7. Adjust oodlight head towards the area to be
illuminated and lock o using two clamping bolts.
Fixing slots on bracket
70mm
For All Floodlights
LN
Blue
(Power Cable)
Brown
(Power Cable)
Blue
(Power Cable)
Brown
(Power Cable)
Terminal Block
Power
Cable