evertz 2430RX-J2K-IP Series User manual

2430RX-J2K-IP Series
JPEG2000 to HDMI Converter
User Manual
© Copyright 2014
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario,
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 0.1, July 2014
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 2430RX-J2K-IP. Evertz Microsystems expressly prohibits the use of
this manual for any purpose other than the operation of the 2430RX-J2K-IP. Due to on going research and
development, features and specifications in this manual are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste. Contact
your Local Authority for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. GETTING STARTED.....................................................................................................................3
2.1. FRONT & REAR PLATE DESCRIPTION .............................................................................3
2.1.1. Video Connection ......................................................................................................3
2.2. HARDWARE INSTALLATION..............................................................................................4
2.2.1. Inband Control Configuration.....................................................................................4
2.3. CONFIGURING BASIC NETWORK SETTINGS...................................................................5
2.4. CONNECTING TO VLPRO...................................................................................................5
3. SPECIFICATIONS.........................................................................................................................6
3.1. TECHNICAL SPECIFICATIONS...........................................................................................6
3.1.1. Input ..........................................................................................................................6
3.1.2. Output........................................................................................................................6
3.1.3. Serial Video Output....................................................................................................6
3.1.4. Audio Output..............................................................................................................6
3.1.5. Electrical....................................................................................................................6
4. VISTALINK PRO INTERFACE......................................................................................................7
4.1. CONTROL PORT CONTROL...............................................................................................7
4.2. DATA PORT CONTROL.......................................................................................................7
4.3. DATA PORT MONITOR........................................................................................................8
4.4. PRODUCT FEATURES ........................................................................................................8
5. DECODER CONFIGURATION......................................................................................................9
5.1. DECODER INPUT CONTROL ..............................................................................................9
5.2. DECODER OUTPUT CONTROL ........................................................................................11
5.3. VIDEO PROC IF +VGPC OPTION IS LICENSED...............................................................12
5.4. INPUT MONITOR................................................................................................................14
5.5. PROGRAM MONITOR........................................................................................................16
5.6. ERROR MONITOR .............................................................................................................17
5.7. NOTIFY...............................................................................................................................18
6. WEB INTERFACE.......................................................................................................................19
6.1. SYSTEM .............................................................................................................................19
6.2. DECODER INPUT CONTROL ............................................................................................20
6.3. DECODER OUTPUT CONTROL ........................................................................................22

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page ii Revision 0.1
6.4. VIDEO PROC CONTROL WHEN +VPGC OPTION IS LICENSED.................................... 23
6.5. INPUT MONITOR...............................................................................................................25
6.6. PROGRAM MONITOR.......................................................................................................27
6.7. ERROR MONITOR.............................................................................................................29
6.8. NOTIFY..............................................................................................................................30
6.9. PRODUCT FEATURES......................................................................................................32
7. FIRMWARE UPGRADE PROCEDURES....................................................................................33
7.1. VISTALINK PRO UPGRADE .............................................................................................33
7.2. WEB INTERFACE UPGRADE........................................................................................... 36
Figures
Figure 1-1: Block Diagram ............................................................................................................................... 2
Figure 2-1: Front Plate ..................................................................................................................................... 3
Figure 2-2: Rear Plate...................................................................................................................................... 3
Figure 4-1: Control Port Tab ............................................................................................................................ 7
Figure 4-2: Data Port Tab ................................................................................................................................ 7
Figure 4-3: Data Port Monitor Tab ................................................................................................................... 8
Figure 4-4: Product Features Tab.................................................................................................................... 8
Figure 5-1: Decoder Input Control Tab ............................................................................................................ 9
Figure 5-2: Decoder Output Control Tab ....................................................................................................... 11
Figure 5-3: Video Processor Tab................................................................................................................... 12
Figure 5-4: Input Monitor Tab......................................................................................................................... 14
Figure 5-5: Program Monitor Tab................................................................................................................... 16
Figure 5-6: Error Monitor Tab......................................................................................................................... 17
Figure 5-7: Notify Tab .................................................................................................................................... 18
Figure 6-1: Web GUI System Tab.................................................................................................................. 19
Figure 6-2: Web GUI Decoder Input Control Tab .......................................................................................... 20
Figure 6-3: Web GUI Decoder Output Control Tab........................................................................................ 22
Figure 6-4: Web GUI Video Proc Control (1) ................................................................................................. 23
Figure 6-5: Web GUI Video Proc Control (2) ................................................................................................. 23
Figure 6-6: Input Monitor Tab......................................................................................................................... 25
Figure 6-7: Program Monitor Tab................................................................................................................... 27
Figure 6-8: Error Monitor Tab......................................................................................................................... 29
Figure 6-9: Notify Tab (1)............................................................................................................................... 30
Figure 6-10: Notify Tab (2)............................................................................................................................. 31
Figure 6-11: Notify Tab (3)............................................................................................................................. 31
Figure 6-12: Product Features Tab................................................................................................................ 32
Figure 7-1: Version Information Drop-down menu......................................................................................... 33
Figure 7-2: Version Information Menu ........................................................................................................... 33
Figure 7-3: Apply Update Drop-down Menu .................................................................................................. 34
Figure 7-4: JAR File Selection ....................................................................................................................... 35
Figure 7-5: Alarm Server Restart................................................................................................................... 35
Figure 7-6: WEB GUI Upgrade ...................................................................................................................... 36

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page iii
REVISION HISTORY
REVISION DESCRIPTION DATE
0.1 Preliminary Release July 2014
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page iv Revision 0.1
This page left intentionally blank

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 1
1. OVERVIEW
The 2430RX-J2K-IP is a versatile JPEG2000 to HDMI/DVI/DisplayPort processing converter. The
2430RX-J2K-IP is used in applications where delivery of J2K encoded video is to be displayed on a
DVI/HDMI monitor.
This self contained module accepts up to one JPEG2000 over IP streaming inputs. It decodes,
processes and converts them on 1 output path to a DVI/ HDMI signal. With integrated auto scaling the
2430RX-J2K-IP device can drive resolutions up to WUXGA (1920x1200).
Features & Benefits
•Full 4:2:2 10-bit pixel input resolution
•Full 24-bit RGB output pixel resolution
•Colour correction (requires +VPGC option)
•Ideal for use with high resolution LCD, plasma and projection screens
•Auto-rescaling
•Superior digital data transmission
•Compact form factor with optional VESA mount brackets
•Analog audio outputs supported
•In band control supported

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 2 Revision 0.1
Figure 1-1: Block Diagram

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 3
2. GETTING STARTED
2.1. FRONT & REAR PLATE DESCRIPTION
Figure 2-1: Front Plate
POWER The 2430RX-J2K-IP comes with an auto-ranging DC voltage adapter that automatically
senses the input voltage. Power should be applied by connecting a 3-wire grounding type power
supply cord to the power entry module on the DC voltage adapter. The power cord should be minimum
18 AWG wire size; type SST marked VW-1, maximum 2.5m in length. The DC cable of the voltage
adapter should be connected to the DC power jack on the rear panel. A green LED located beside the
DIP switch connector will be illuminated when there is power applied to the 2430RX-J2K-IP.
SDI OUT: BNC per IEC 60169-8 Amendment 2
2.1.1. Video Connection
Figure 2-2: Rear Plate
COM: DVI, VGA and Component cable
Supported Resolution: VESA: VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA,
WSXGA+, WUXGA, WQXGA (dual-link). CEA-861B: 480p, 576p,
720p, 1080i, 1080p
Color Resolution: 24 bits
CONTROL: Standard CAT5 cable (not included)
AUDIO OUT: 1/8" Stereo (3.5mm) Male Mini to 2-RCA Male Audio Y-Cable (not
included)
HDMI OUT: Standard HDMI Cable (not included)

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 4 Revision 0.1
2.2. HARDWARE INSTALLATION

Note: SFP’s must be ordered separately
To successfully install the 2430RX-J2K-IP the user will require the following:
1. Unused IP address on the network or a DHCP server.
2. VistaLINK® PRO Server IP address.
Before handling this device it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Ensure that the device is powered up and the green LED is on. Connect the device via the COM port
using a 9-pin Serial Cable., Connect the Female end of the serial cable to the serial port of your PC.
Connect the the opposing Male end to the 9-Pin connector on rear of unit. In order to begin
configurations ensure the below settings are configured properly:
Baud: 115200
Data: 8-BIT
Parity: none
Stop Bits: 2
Flow Control: none
Open TeraTerm (if using Windows XP or older open Hyper Terminal) to make the required changes to
the IP address on the card. Use the login customer and password customer.
2.2.1. Inband Control Configuration
This sub-menu enables the user to configure the settings for unicast traffic forwarding. The user should
be aware that once this has been enabled, the control port will not be active and all control will be made
via Inband Data connection. The following steps should be followed to ensure proper confirguration:
1) Connect COM port to 2430RX-J2K-IP
2) Login when prompted: username customer password customer
3) Select Option (5) For inband control
3) Select (1) for Enable
4) Select (Y) to confirm
5) Select (X) to save and exit from the 2430RX-J2K-IP main menu
After the Inband control configurations have been enabled, wait for the unit to reboot.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 5
2.3. CONFIGURING BASIC NETWORK SETTINGS
To make changes to the IP address select Network Setup. Set the IP address to the desired subnet as
well as set the Gateway. Make the same changes for the IP address and Gateway of Port 2 as
required. When done Exit (X) the Network Setup and Save and Exit (X) from the Main Menu to ensure
all changes are saved.
Power Cycle the 2430RX-J2K-IP to ensure all changes are loaded to the card.
2.4. CONNECTING TO VLPRO
This chapter assumes that the VistaLINK®PRO server and client are already configured for your
network and you have basic knowledge of the VistaLINK®PRO interface. It also assumes that the user
or network administrator has already added the appropriate jar file to the server, and both the client and
server applications have been restarted. Please refer to the VistaLINK®PRO manual for instructions on
how to load a jar file.
Open VistaLINK®PRO and click on the refresh tree icon. Expand the hardware tree by clicking on the
“+” button. Your card should appear as a newly listed device with the IP address used to configure the
card. It may take up to a minute to appear while the card and switch negotiate network settings (this
can be verified directly on the switch if necessary).

Note: If after a couple of minutes the card has still not appeared, try selecting
Add Agent from the Tree> Add/Update Agent menu. Enter the IP address and
select OK. The card should now be listed and will remain grayed out for a
moment while VistaLINK®PRO finds the card and confirms its configuration.
Please consult your network administrator if you continue to have problems connecting the card with
VistaLINK®PRO, alternatively contact Evertz Microsystems Ltd. or your authorized reseller for technical
support.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 6 Revision 0.1
3. SPECIFICATIONS
3.1. TECHNICAL SPECIFICATIONS
3.1.1. Input
•2 x Female LC/UPC connectors supporting JPEG2000
3.1.2. Output
•1 x JPEG2000 to HDMI Converter
•2 x HDMI Output (mirror)
•Supported resolutions: 525, 624, 720p, 59.94/5 Hz and VESA up to WUXGA (1920x1200)
3.1.3. Serial Video Output
•2 x BNC per IEC60 169-8 Amendment 2 (mirror of HDMI out)
•Supported standards: 525, 625, 720p, 59.94/50 Hz, 1080p 59.94/50 Hz
3.1.4. Audio Output
•2 x RCA stereo pairs
3.1.5. Electrical
•Voltage 12V DC, Auto ranging 100-240V AC 50/60 Hz adapter included
•Power: 11W
•Physical Dimensions: 8.13”L x 9.28”W x 1.75”H
•Compliance
oElectrical Safety: Power supply UL listed complies with CE Low Voltage Directive
oEMI/RFI: Complies with FCC Part 15, Class A EU EMC directive

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 7
4. VISTALINK®PRO INTERFACE
4.1. CONTROL PORT CONTROL
Figure 4-1: Control Port Tab

Note: There is only one physical control port on the unit, both IP’s come from
the same Network Interface Card (NIC). This allows the unit to be controlled via
multiple subnets on this port.
IP Address: This parameter allows the user to set an IP address for the control port.
NetMask: This parameter allows the user to set the netmask (subnet) for the control port.
Gateway: This parameter allows the user to set the gateway address for the control port.
4.2. DATA PORT CONTROL
Figure 4-2: Data Port Tab
IP Address: This parameter allows the user to set an IP address.
IP NetMask:This parameter allows the user to set the netmask (subnet).
IP Gateway: This parameter allows the user to set the gateway address.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 8 Revision 0.1
4.3. DATA PORT MONITOR
Figure 4-3: Data Port Monitor Tab
Port Link Status: This parameter returns the port status link, in either an ‘UP’ or ‘DOWN’ state.
Port Link Info: This parameter returns the port link status (i.e. speed, duplex).
Received Data Ethernet Total Bitrate: This field displays the bitrate received on this Ethernet port and
is represented in kbps.
Transmitted Data Ethernet Total Bitrate: This field displays the bitrate transmitted on this output
Ethernet port and is represented in kbps.
Total Ethernet Rx Bit Rate: This parameter displays the bit rate received on this Ethernet port is
represented in kbps, and the value can range from 0 to 1000000000.
Total Ethernet Tx Bit Rate: This parameter displays the bit rate transmitted on this output Ethernet
port is represented in kbps, and the value can range from 0 to 1000000000.
4.4. PRODUCT FEATURES
Figure 4-4: Product Features Tab
Product License
Product License: This field displays the product license key.
Product Serial Number: This field displays the card serial number.
Product MAC Address: This field displays the card MAC address.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 9
5. DECODER CONFIGURATION
5.1. DECODER INPUT CONTROL
Figure 5-1: Decoder Input Control Tab
Input Stream Active
Input Stream State: This parameter will activate or deactivate this stream. By default, all streams are
inactive. Once this parameter is set to active, traffic can run through it.
Input Port Select: This parameter allows the user to set the physical interface to receive data from
either data port 1 or data port 2.
Input IP Address: This parameter allows the user to define the IP address/ Multicast address from
which data will be received.
Input IP Port Number: This parameter allows the user to select the input UDP/RTP port number,
which can range from 1 to 65535.
Input Program Control
Program Tuning Mode: This parameter allows the user to select the program Tuning mode of the
decoder. The user can select from two options:
•AutoPidSelect: automatically choose the PIDs for each audio stream, based on Auto
Program Select Mode.
•ManualPidSelect: Manually select PIDs for each audio stream.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 10 Revision 0.1
Auto Program Select Mode: This control allows the user to set how the decoder will select a
program for decoding when Program Tuning Mode is set to auto.
•First Program in PAT: select audio PIDs from first program will be chosen.
•Lowest Program Num: select audio PIDs from lowest program will be used.
•Specific Program Select: will pick audio PIDs from specific program, specified by Program
Number Select control, for decoding.
Program Number Select: This parameter allows the user to select the program which will be
decoded. This control is applicable only when the Program Tuning Mode is set to Auto PID Select,
value for this range can be set from 0 to 65535.
PID Control

Note: 0, 1 and 8191 are reserved PID’s in MPEG, so these values are not
included.
Video PID Select: This control allows the user to select the Video PID that will be decoded. This
control is only applicable when the Program Tuning Mode is set to Manual PID Select. Range for
these values can be set from 2 to 8190.
Audio PID Select 1 – 4: This control allows the user to select up to four Audio PID’s which the
decoder will decode and embed into the output video. This control is only applicable when the
Program Tuning Mode is set to manual PID select.
PCR PID Select: This parameter allows the user to select the PID for incoming PCR clock. This
control is only applicable when the Program Tuning Mode is set to Manual PID Select. Range for
these values can be set from 2 to 8190.
VANC PID Select: This control allows the user to select the VANC PID which will be decoded. This
control is only applicable when the Program Tuning Mode is set to Manual PID Select. Range for
these values can be set from 2 to 8190.
PID Configuration: This parameter configures the method in which PIDs are set. It can be user
defined or pre-assigned, in which case all the PID controls will be greyed out.
Decoder Control
Decoder Up Time: This controls returns a string representation of the time the decoder was last
restarted. It is represented similar to 'xxxx days yy hrs zz min aa sec'. Internally, it is a 31 bit
unsigned integer, reflecting seconds which will provide for up to 3100 days of operation before it
wraps around.
Load Factory Config: Part of the Input Control table, this variable allows the SNMP Manager to
revert the decoder configuration to a known factory recommended setting. The manager should read
the variable prior to setting, to ensure it is in the 'ready' state. Writing the 'load' command will cause
the decoder to cease current operations and sources and load the factory default configuration
settings. This will NOT include IP interface settings, to ensure network contact is maintained. When
the variable returns to the 'ready' state, the operation is complete. The operator can then manually
refresh configuration displays.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1 Page - 11
Reboot: Part of the decoder Output table, this variable allows the SNMP Manager to perform a
remote reboot of the decoder. This is useful when the IP interface (and other) changes have been
made, and a reset is needed to make them take affect. The manager should read the variable prior to
resetting, to ensure it is in the 'ready' state. Writing the 'reboot' command will cause the decoder to
perform a software restart of the decoder. VLPro will communicate with the operator to confirm the
desire to reboot. If the decoder card is working with a companion card (IP-ASI), VLPro will also issue
a coordinated reset command to that card as well.
This is done by issuing the following: commandEntryEntry: commandIndex = adminCommand,
commandString = 'reset'.

Note: The decoder will react immediately to reboot command, and will not
respond to the SNMP set command.
5.2. DECODER OUTPUT CONTROL
Figure 5-2: Decoder Output Control Tab
General
Output Video Color: This control allows the user to select the output video color that will sent on the
output when input ASI is missing and the Output Video Mode is set to continuous. The user can set
this to black, green, and freeze.

2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Page - 12 Revision 0.1
SDI Audio Source
This control allows the user to enable or disable which audio service will be embedded into the audio
group for SDI/HDSDI output. NOTE: This configuration is the same for SDI Audio Sources 1 through
16.
Analog Audio Source
This control allows the user to enable or disable the audio service which will be embedded into the
audio group for Analog output. NOTE: This configuration is the same for Analog Audio Sources 1
through 6.
HDMI Audio Source
This control allows the user to enable or disable the audio service that will be embedded in to the
audio group for HDMI output. NOTE: This configuration is the same for HDMI Audio Sources 1
through 8.
5.3. VIDEO PROC IF +VGPC OPTION IS LICENSED
Figure 5-3: Video Processor Tab
Enable Video Proc: This control will Enable or Disable the video processor module.