Exaco GIGANT User manual

VERSION 2023.1
MOUNTING INSTRUCTIONS -
MOUNTING INSTRUCTIONS
GIGANT
HTTPS://JANSSENS-ALUSYSTEMS.BE/EN/DOWNLOADS
+
ƐƐĞŵďůLJsŝĚĞŽƐĐĂŶ
ďĞĨŽƵŶĚďLJƐĐĂŶŶŝŶŐ
ƚŚĞĐŽĚĞƚŽƚŚĞůĞĨƚ
ǁŝƚŚLJŽƵƌ ƐŵĂƌƚƉŚŽŶĞ
ǁǁǁĞdžĂĐŽĐŽŵ
ϴϳϳͲϳϲϬͲϴϱϬϬ
KƌĨŝŶĚƚŚĞůŝŶŬƚŽŽƵƌzŽƵdƵďĞƉĂŐĞĂƚ
ǁǁǁĞdžĂĐŽĐŽŵ'ŽƚŽƚŚĞsŝĐƚŽƌŝĂŶ
'ƌĞĞŶŚŽƵƐĞWůĂLJůŝƐƚĨŽƌĂůůǀŝĚĞŽƐ

PRODUCT INFORMATION
Thank you for buying a high-quality aluminum greenhouse.
REMARKS
In all drawings you find the mounting-instructions for all basic standard-models (Action Models). However this manual
should be a sufficient guidance for all special-case greenhouses. This greenhouse is designed for cultivation of plants/
flowers. Therefore leakage, water drops and condensation inside the building are allowed. The building may only be
entered by competent persons during cultivation or maintenance. Aluminium profiles that are not painted may show
black stains, these stains are not a production error: they can be easily removed with a aluminium cleaner available at
every good drugstore. The rubber strips have been treated with oil/silicone on the interior to facilitate the assembly. The
building should be mounted on a solid concrete foundation deep enough to get a solid and frost-free ground. Anchoring
of the foundation should be made by the owner or operator and should be checked periodically. During winter the roof
has to be cleared of snow or supported in a suitable way. The greenhouse should be built in a location protected from
strong winds. Protective gear (such as protective gloves) should be used during mounting in order to avoid injuries. One
should at all times pay attention to the local building regulations.
STORAGE
The packages and glass boxes must be stored in a dry place, protected from sunlight and any form of moisture. Excessive
humidity or condensation inside the packaging may lead to corrosion on profiles and/or glass!
ASSEMBLY ORDER
The assembly procedure is the same for all our greenhouses.
- Sorting of all profiles and articles.
- Mounting of the complete aluminium construction.
- Leveling of the construction using a waterlevel.
- Securing the building to the ground
- Glazing.
REQUIRED TOOLS
Socket wrench nr. 10 or spanner nr. 10, water-level, screwdriver, drilling machine + drill 4.2 mm, scissors (to cut the
rubber).
We reserve the right to change the construction without prior notice!
Need Help?
Please call Exaco at
512-407-8500
[email protected]

DETAIL 1
X
45744574
5312 5312
60506050
6788
7526
8264
9002
" GIGANT "
DETAIL 2
A
A
B
B
Note: do not fill anchor holes with cement until the greenhouse
frame is built.
Concrete needs to be at least 8" wide
Heavy duty portal frame is 2
3/8" x 5 1/8"
Base frame is 2 1/4" wide
The are corner anchors that hold the corners
together and extend 12" down into the ground.
There are also heavy duty reinforcements that
support the roof structure. These are shown at
detail 2 above and to the right.
The most secure anchoring method involves
embedding the corner anchors and supports into
the ground. Conversely, some contractors have
trimmed then and anchored the frame to the
poured concrete with tap-con screws. The best
option is determine dby your site setting and
wind load.

PRO6760
PRO1454
PRO1456
TRE
PRO6120
PRO6918
PRO33325
PRO210
GDO
PRO6578
GSO
GTO
PRO20661
U 60x60x60

B
L = 600
B = LENGTH > 6m10
A
PRO6760
PRO6760
!
50 x 50 x 600
U 2 x 89 X 32 x 600
GDO
GDO
25 x 15 x 600
25 x 25 x 600
PRO6120
PRO6120
!
GTO GTO

OPTION: HINGED DOOR OPTION: SLIDING DOOR OPTION: LOW THRESHOLD
PRO29909
PRO29909

X
X
M6x15
M6x50
B
A
PRO6120
PRO210
PRO6120

M6x15
PRO6578

M6x15
PRO1454
PRO6578

M6x15
GDO
PRO1454
PRO6578
B > 6m10
!

B > 6m10
!
GTO
GSO
GDO
PRO1454
GDO
PRO1454

PRO1456
M6x15
PRO6120
GDO

B > 3m10
! !
2 X 8 pcs M6x10
INBUS 4
2 X 8 pcs M6x10
INBUS4

B > 3m10
! !
2 X 4,8 x19
2 X 4,8 x19
4,8 x19
4,8 x19
M6x16
M8x20
M8x20
M8x20
M6x16
M6x16
4,8 x19

PRO6120
PRO1456
TRE
GDO
PRO1454
M6x15

PRO1456
M6x15
PRO1454
LG

PRO6918
M6x15
GDO
PRO1454
GSO
PRO6918

PRO6760
M6x15

PRO1456
M6x15
LG
PRO1454
PRO6918
PRO1454
PRO1456

4,8 x19