PRODUCT INFORMATION
Dear customer
Thank you for buying a high-quality aluminium greenhouse.
REMARKS
In all drawings you find the mounting-instructions for all basic standard-models. However this manual should be a
sufficient guidance for all special-case greenhouses. This greenhouse is designed for cultivation of plants/flowers.
Therefore leakage, water drops and condensation inside the building are allowed. The building may only be entered by
competent persons during cultivation or maintenance. Aluminium profiles that are not painted may show black stains,
these stains are not a production error: they can be easily removed with a aluminium cleaner available at every good
drugstore. The rubber strips have been treated with oil/silicone on the interior to facilitate the assembly. The building
should be mounted on a solid concrete foundation deep enough to get a solid and frost-free ground. Anchoring of the
foundation should be made by the owner or operator and should be checked periodically. During winter the roof has
to be cleared of snow or supported in a suitable way. The greenhouse should be built in a location protected from
strong winds. Protective gear (such as protective gloves) should be used during mounting in order to avoid injuries. One
should at all times pay attention to the local building regulations.
ASSEMBLY ORDER
The assembly procedure is the same for all our greenhouses.
- Sorting of the profiles according the model.
- Mounting of the complete aluminium construction.
- Leveling of the construction using a waterlevel.
- Securing the building to the ground
- Glazing.
REQUIRED TOOLS
Socket wrench nr. 10 or spanner nr. 10, water-level, screwdriver, drilling machine + drill 4.2 mm, scissors (to cut the
rubber).
We reserve the right to change the construction without prior notice!
Customer Service or Assembly Questions?
Give us a call
Toll Free: 1-877-760-8500
Exaco Trading
www.exaco.com
