Fametech POStation 7000 Series User manual

- 1 -
POStation 7000 Series
Version 1.0
© Copyright Fametech Inc. (TYSSO) 2007
Service Manual

- 2 -
Table of Contents
I. Part List.............................................................................................................................................4
II. Flash/Update BIOS..........................................................................................................................8
III. System Disassembly.....................................................................................................................10

- 3 -
Table of Figures
Figure 1 Explode of the System...........................................................................................................4
Figure 2 Cables ....................................................................................................................................6
Figure 3 Mainboard Layout .................................................................................................................7

- 4 -
I Part List
Figure 1 Explode of the System

- 5 -
No. Part No. Description
1 JP-POS-6000-LCD-FRONT System Front Cover
2 KP-POS-7000-IBUTTON-READER I-Button Reader (Option)
3 KP-POS-7000-I-BUTTON I-Button (Option)
4 JP-POS-6000-BOTTOM-COVER Bottom Base Cover
5 JP-POS-MSR-SLOT-COVER MSR Cover
6 JP-POSMAL-KNOB On/Off Switch
7 BP-PART-POS-7000-I-BUTTON-PCBA I-Button Decorder Board
8 KP-POS-6000-MCR-HOLDER MSR Holder (Option)
9 JM-MCR-9-STAND-1H-B MSR Stand (Option)
10 RH-RMB-33-W7-NS-30-14 MSR Manetic Head (Option)
11 BM-PCBA-MMSR-106-KU MSR Decorder Board (Option)
12 JP-POS-5050-RUBBER Touch Panel Rubber
13 BP-HT-150F-5RA-G01N-18R-200FH Touch Panel
14 LC-POS-7000-CLAA150XP01Q LCD Panel
15 KP-POS-7000-LCD LCD Panel Holder
16 KP-POS-7000-IO-TY I/O Bracket
17 BP-PART-POS-6000-QF133V1.15S Invertor
18 BP-PART-POS-7000-HT-580-PCBA Touch Control Board
19 BP-PART-POS-7000-DFC701012H CPU Gasket
20 BP-PART-POS-7000-MB-PCBA Mainboard
21 BP-PART-POS-7000-CPU-2.0G CPU
22 BP-PART-POS-7000-DFC701012H CPU Cooler with Fan
23
BP-PART-POS-7000-DDR400-256
BP-PART-POS-7000-DDR400-512
BP-PART-POS-7000-DDR400-1G
RAM 256MB
RAM 512MB (Option)
RAM 1GB (Option)
24 KP-POS-6000-COVER Mainboard Cover
25 KP-POS-6000-HD-HOLDER HDD Holder
26 BP-PART-CUBIC-2.5HDD 2.5” HDD
27 BP-PART-POS-7000-DFB402012L System Fan
28 JP-POS-6000-LCD-REAR System Rear Cover
29 JP-POS-6000-HD-COVER HDD Cover
30 JP-POS-7000-HINGE-SWIVEL-B Hinge Swivel Cover
31 BP-SEMI-POS-7000-HINGE-HOLDER Hinge Holder
32 KP-POS-7000-BASE Alumium Base
33 JP-POS-6000-SIDE-COVER Base Side Cover
34 JP-POS-6000-BASE-REAR-COVER Base Rear Cover
35 JP-POS-6000-DISPLAY-HOLDER Display Holder (Option)
36 JP-POS-6000-DISPLAY-COVER Base Top Cover

- 6 -
Figure 2 Cables

- 7 -
Figure 3 Mainboard Layout
No. Part No. Description
1 CP-CBL-POS-7000-COM3&4 COM Port DB9 RS-232 Cable
2 CP-CBL-POS-7000-HDD HDD Cable
3 CP-CBL-POS-7000-INT Invertor Cable
4 CP-CBL-POS-7000-LED-HDD HDD LED Cable
5 CP-CBL-POS-7000-LED-PW Power LED Cable
6 CP-CBL-POS-7000-SW-B27cm Power Switch Cable
7 CP-CBL-POS-7000-MMSR KUR MSR Cable (Option)
8 CP-CBL-POS-7000-LVDS LVDS Cable
9 CP-CBL-POS-7000-TH-U Touch Control Board Cable (USB)
10 CP-CBL-POS-7000-VFD-PW VFD/Monitor Power Cord (Option)
11 CP-CBL-POS-7000-I-BUTTON I-Button Cable

- 8 -
II Flash/Update BIOS
1. Connected an external USB floppy or CD-ROM to POS-7000. Insert a DOS floppy or CD.
Enter the DOS system.
2. As “A:\>” appears, enter “dir” and press the <Enter> key. The content of the floppy or CD
will show on the screen. As the figure shown below, there are 2 items “COMMAND COM”
and “FLASHROM” in the floppy.
3. Enter “cd” before the item to be updated then press the <Enter> key to go to the root directory.
As the figure shown below, flashroom is the item to be updated; thus “cd flashrom” is entered
to go to the root directory of flashroom.

- 9 -
4. Enter “dir” and then press the <Enter> key. The content of the item to be updated will show
on the screen. Enter “go” and the item will be flashed automatically. Do not turn off the
computer or make any diaturbance in the process of flashing.
5. Remove the external USB floppy or CD-ROM. Reset the computer.

- 10 -
III System Disassembly
1. Remove the hinge swivel covers and
loosen the screw x 6 on both sides.
2. Carefully take off the system from the
aluminum base. Loosen the screw x 1 to
remove the HDD cover and the screw x 5
to remove the hinge holder.
3. Loosen the screw x 14 to remove the LCD
panel rear cover.

- 11 -
4. Loosen the screw x 3 on the back of the
mainboard cover.
5. Loosen the screw x 2 on both sides of the
mainboard cover.
6. Loosen the screw x 6 on the mainboard
cover.
7. Unplug the HDD and cooler connector.
Remove the mainboard cover.

- 12 -
8. Loosen the screw x 4 to remove the MSR
(option).
9. Loosen the screw x 2 to remove the MSR
stand (option).
10. Loosen the screw x 2 and disconnect the
cables to remove the invertor.

- 13 -
11. Loosen the screw x 2 to remove the touch
control board.
12. Loosen the spacer x 12 and disconnect the
DB9 cables to remove the I/O bracket.
13. Loosen the screw x 6 and disconnect the
cable to remove the mainboard.
14. Pull open the hooks to remove the RAM.

- 14 -
15. Turn over the mainboard and loosen the
screw x 4 to remove the CPU gasket.
16. Remove the cooler.
17. Take off the CPU.

- 15 -
18. Loosen the screw x 10 to remove the
LCD panel holder.
19. Loosen the screw x 4 to remove the LCD
panel.
20. Remove the touch panel rubber.

- 16 -