FarmTek PolyMax 108293 User manual

1
GREENHOUSE BENCH KITS
Revision date: 10.26.21
All Rights Reserved. Reproduction
is prohibited without permission.
PolyMax® Bench Systems
SKU# DIMENSIONS
108293 4' W x 8' L (Top only)
108293S 4' W x 8' L x 30" H

GREENHOUSE BENCH KITS
2Revision date: 10.26.21
READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE BENCH.
Thank you for purchasing this PolyMax® Bench System.
When properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the product. Please read
these instructions before you begin.
If you have any questions during the assembly, contact
Customer Service at 1-800-245-9881 for assistance.
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal tubes.
• Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.
ASSEMBLY PROCEDURE
Following the instructions as presented will help ensure the
proper assembly of your bench.
The steps outlining the assembly process are as follows:
1. Verify that all parts are included in the shipment. Notify
Customer Service for questions or concerns.
2. Read these instructions and all additional
documentation included with the shipment before you
begin.
3. Gather the tools and assistants needed to assemble
the product.
4. Assemble the components in the order they are
presented in these instructions.
5. Assemble the frame.
6. Install and secure the PolyMax®.
7. Read the care and maintenance information.
8. Complete and return all warranty information as
instructed.
CARE AND MAINTENANCE
Proper care and maintenance of your bench is important.
Check the following items periodically to properly maintain
your bench.
• Check connections and all fasteners to verify that they
remain tight.
• Do not climb or stand on the bench at anytime.
• Replace all worn or damaged parts promptly.
• If the bench is moved, inspect all parts and
connections before reassembling and use.
• For replacement or missing parts, call 1.800.245.9881
for assistance.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the feed bunk. Additional tools may be needed.
• Tape measure or measuring device
• Marker
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Hammers, gloves, and eye protection
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the bench.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets and this assembly guide.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
diagrams throughout these instructions for clarification,
or contact Customer Service.
NOTE: At this time, you do not need to open the plastic
bags containing the fasteners (if used).

3
GREENHOUSE BENCH KITS
Revision date: 10.26.21
The following graphics and photos will help you identify the
different parts of the bench.
FA4482B
Tek Screw
100441
Nut Setter
104626
3-Way
Tube Fitting
104625
2-Way
Tube Fitting
HA2217
PolyMax® Bench
Top (4)
104624
One-Way W/Plate
(108293S only)
Square Tube
SKU# Cut Length Quantity
S15P044 1.5" x 1.5" x 44" 2
104779 1.5" x 1.5" x 96" 2
S15P092 1.5" x 1.5" x 92" 1
S20P028
(108293S only)
2" x 2" x 28" 4
Aluminum Strap
(108293S only)
SKU# Cut Length Quantity
112480Z29 1" x 29" 4
112480Z53 1" x 53" 4
117413
Flat Screw

GREENHOUSE BENCH KITS
4Revision date: 10.26.21
1Before assembling the bench, layout and measure the 1.5" x 1.5" square tube lengths to verify that you
have all the correct tubes.
Gather two (2) 3-Way fittings and one (1) 92" length of square tube. Assemble the center brace as shown
below using a Tek screw on the side of the fitting.
NOTE: Leave one 3-Way fitting loose for now, to adjust the length of the center brace when assembling
the frame.
3-Way fitting
connection
Tek screw
92" Tube
Center Brace

5
GREENHOUSE BENCH KITS
Revision date: 10.26.21
2Gather two (2) 96" tubes, two (2) 44" tubes, four (4) 2-way corner fittings, and the assembled center brace
from Step 1.
Slide the 44" tubes through the 3-way fittings first, and then assemble as shown below.
Set the outside-to-outside dimensions and measure diagonally to verify that the frame is square. (See
dashed lines below.) Frame is square when both diagonal measurements are the same.
After squaring the frame and setting the outside-to-outside dimensions, secure each corner connection
using Tek screws. Position Tek screws on the inside of the frame—two at each corner fitting.
IMPORTANT: The 96" tubes will span the
entire length of the bench. Verify that the open
ends of the 2-way corner fittings are positioned
to accommodate the whole tube. See diagram
to the right.
Slide 44" tube
through the
3-way fitting.
44" Tube
96" Tube
Center Brace
96" Tube
44" Tube
44" Tube
Tek
screws
1/4"
96" Tube
44" Tube
ATTENTION: Leave 1/4" space between the end of the 96"
tubes and the open corner edge.
Outside-to-Outside Dimensions
WIDTH: 48"
LENGTH: 96-1/2"
96-1/2"
outside-to-outside
48"
outside-to-outside
Install Tek screws on the back or
inside of each corner fitting.