Specification
orking Pressure 15-50PSI Inlet Thread M5
Fluid Cup Capacity 22cc Nozzle 0.8mm
Operation
1 Put fluid into the cup after thinning appropriately.
2 Hold airbrush firmly in your hand.
3 By pressing the main lever, air will be released from the nozzle, drawing back on
the lever will release the paint.
4 The spray pattern is regulated by the distance between the work surface and the
airbrush.
5 For fine line spray, remove the needle cover and hold the airbrush close to work
surface.
Maintenance
1 Empty the fluid cup and wash with water or solvents with a brush.
2 Refill cup with water or solvent and block the needle cover with your finger and
pull back the trigger. The air will flow backward into the nozzle and remove any
paint remaining.
Parts Breakdown
1 FMT2138/1 Air Tip
2 FMT2138/2 O-Ring
3 FMT2138/3 Air Tip Bushing
4 FMT2138/4 Body
5 FMT2138/5 Handle
6 FMT2138/6 Fine Fluid Cap
7 FMT2138/7 Fine Fluid Needle
8 FMT2138/8 O-Ring
9 FMT2138/9 Clip asher
10 FMT2138/10 Cover Gasket
11 FMT2138/11 Tube
12 FMT2138/12 Lid with Adaptor
13 FMT2138/13 Glass Jar
14 FMT2138/14 Plain Lid
15 FMT2138/15 Glass Jar
16 FMT2138/16 Hose
17 FMT2138/17 1/4” to M5 Hose
18 FMT2138/18 O-Ring
19 FMT2130/19 Adjusting Screw
20 FMT2130/20 Regulator
21 FMT2130/21 O-Ring
22 FMT2130/22 Pipette
F st Mover Tools Ltd
Unit 1 Frenchs Avenue, Dunst ble, LU6 1BH, United Kingdom
T: 0044 (0)1582 661993 E: s les@f stmovertoolsuk.com W: www.f stmovertoolsuk.com
Distribution Throughout Europe
FMT2138 Instruction Manual ise Precaution
This product is free from
contaminants. However,
we do recommend that you
flush your airbrush through
with a suitable thinner
before use as a
preventative precaution.
