Feig Electronic ANT.U580/290-EU User manual

IDENTIFICATION
M90116-0e-ID-B
INSTALLATION
ID ANT.U580/290-EU
Robust UHF Long Range Antenna 30° circular

IDENTIFICATION
ID ANT.U580/290-EU
Note
INSTALLATION
Page 2 of 11
Note
Note
© Copyright by
FEIG ELECTRONIC GmbH
Lange Strasse 4
D-35781 Weilburg (Germany)
Tel.: [phone]
http://www.feig.de
[e-mail]
With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.
Copying of this document and giving it to others and the use or communication of the contents thereof are
forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved
in the event of the grant of a patent or the registration of a utility model or design.
Composition of the information in this document has been done to the best of our knowledge.
FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,
despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
The instructions given in this manual are based on advantageous boundary conditions.
FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments
and does not give any guarantee for the functionality of the complete system which incorporates the subject
of this document.
FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not
designed with components and testing methods for a level of reliability suitable for use in or in connection
with surgical implants or as critical components in any life support systems whose failure to perform can
reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the
user or application designer must take reasonably prudent steps to protect against system failures.
FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this
document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH
does not convey any license under its patent rights nor the rights of others.

IDENTIFICATION
ID ANT.U580/290-EU
Contents
Page 3 of 11
Contents
Contents
1Safety Instructions 4
2Performance Features of ID ANT.U580/290-EU 5
3Installation 6
4Accessories 8
5VSWR 9
6Beamwidth 10
7Technical Data 11

IDENTIFICATION
ID ANT.U580/290-EU
1 Safety Instructions
INSTALLATION
Page 4 of 11
1 Safety Instructions
Safety Instructions
►The device may only be used for the intended purpose designed by the manufacturer.
►The manual must be read thoroughly and kept safe and accessible for all users.
►Unauthorized changes and the use of spare parts and additional devices which have not been sold or
recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized
measures shall exclude any liability by the manufacturer.
►The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the
device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in
the manual or automatically set parameters for a device or for an incorrect application of a device.
►Repairs may only be executed by the manufacturer.
►Installation, operation and maintenance procedures should only be carried out by qualified personnel.
►Use of the device and its installation must be in accordance with national legal requirements and local
electrical codes.
►When working on devices the valid safety regulations must be observed.
►Prevent children and unauthorized persons from accessing the device.
►Equipment is intended for use only in restricted access area.
►Special advice for carriers of cardiac pacemakers:
Although this device doesn’t exceed the valid limits for electromagnetic fields you should keep a
minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker.

IDENTIFICATION
ID ANT.U580/290-EU
2 Performance Features
INSTALLATION
Page 5 of 11
2 Performance Features of ID ANT.U580/290-EU
Performance Features
The antenna ID ANT.U580/290-EU is a circular polarized antenna and can be used at operating frequencies
in the UHF range from 865 MHz – 870 MHz.
Due to the circular polarization a reading of transponders is possible in random orientations.
The antenna is optimized for the UHF frequency band dedicated to RFID applications in Europe. In this
frequency band the antenna offers best possible reading performance.
Description Frequency Order Number
ID ANT.U580/290-EU 865 MHz – 870 MHz 5238.000.00.00
Table 1: Ordering Information – Antenna

IDENTIFICATION
ID ANT.U580/290-EU
3 Installation
INSTALLATION
Page 6 of 11
3 Installation
Installation
The ID ANT.U580/290-EU is designed to be mounted outdoors. Four holes for M5 screws are provided on
the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth
of maximum 12 mm (0.5"). For secondary protection the antenna can be secured by means of an eye bolt,
that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.UEB-A
can be purchased from FEIG ELECTRONIC.
Fig. 1: Dimensional drawing – back view

IDENTIFICATION
ID ANT.U580/290-EU
3 Installation
INSTALLATION
Page 7 of 11
Fig. 2: Dimensional drawing - side view
CAUTION:
•Do not exceed the bending radius of the connection cable (15 mm static, 30 mm dynamic) to
prevent damage and a decrease of the antenna performance.
•To keep the full protection class and to prevent performance losses of the antenna it needs to be
ensured that the screw plug is not damaged.

IDENTIFICATION
ID ANT.U580/290-EU
4 Accessories
INSTALLATION
Page 8 of 11
4 Accessories
Accessories
For the ID ANT.U580/290-EU following optional accessories are available:
Order Number
Article
Description
5241.001.00 ID ANT.C2-B UHF Antenna Cable SMA/TNC 2 m
5241.002.00 ID ANT.C6-B UHF Antenna Cable SMA/TNC 6 m
5243.001.00 ID ANT.C2-C UHF Antenna Cable R-TNC/TNC 2 m
5243.002.00 ID ANT.C6-C UHF Antenna Cable R-TNC/TNC 6 m
5335.000.00 ID ANT.C6-x UHF Antenna Extension Cable TNC/TNC 6 m
5254.000.00 ID ANT.UEB-A Eye Bolt M6 eye bolt for secondary protection, PU: 10 pieces
NOTE:
The maximum tightening torque of the TNC jack is 0,45 Nm (4.0 lbf in).

IDENTIFICATION
ID ANT.U580/290-EU
5 VSWR
INSTALLATION
Page 9 of 11
5 VSWR
VSW R
The typical VSWR of the antenna ID ANT.U580/290-EU is < 1,25:1.

IDENTIFICATION
ID ANT.U580/290-EU
6 Antenna Pattern
INSTALLATION
Page 10 of 11
6 Beamwidth
Antenna Pattern
The 3 dB beamwidth of the antenna is 65 ° x 30 °.
Fig. 3: 3 dB beamwidth

IDENTIFICATION
ID ANT.U580/290-EU
7 Technical Data
INSTALLATION
Page 11 of 11
7 Technical Data
Technical Data
Mechanical Data
Housing Plastic (ASA-PC)
Aluminum
Dimension (W x H x D) 576 mm x 288 mm x 80 mm
(22.7" x 11.3" x 3.1")
Weight 3850 g
Mounting VESA FDMI MIS-D 100 mm x 100 mm
Protection Class IP 65
Colour Anthracite
Aluminum
Electrical Data
Operating Frequency 865 MHz – 870 MHz
Antenna Gain 11,0 dBic (± 0,5)
3 dB Beamwidth
•E-Plane
•H-Plane
65°
30°
Polarization Circular
VSWR < 1,25:1
Antenna Connector TNC socket (50 Ω)
Environmental Conditions
Temperature Range
•Operation
•Storage
-25 °C to 55 °C
-25 °C to 80 °C
Humidity 0 % to 95 % (non-condensing)
Vibration EN 60068-2-6
10 Hz to 150 Hz: 0,075 mm / 1 g
Shock EN 60068-2-27
Acceleration: 30 g
Applicable Standards
Radio Regulation
•Europe
•USA
•Canada
•India
EN 302 208
FCC 47 CFR Part 15
IC RSS-GEN, RSS-210
BIS IS 13252 Part 1
EMC EN 301 489
Safety
•Low Voltage
•Human Exposure
•Fire
EN 62368
EN 50364
EN 45545
Others RoHS, WEEE