Feig Electronic ID ISC.ANTH200/200-A User manual

OBID
®
Handheld Antenna
ID ISC.ANTH200/200-A
R
(13.56 MHz)
Advanced reader technologies
OBID - RFID by FEIG ELECTRONIC
R
Optimized for operation with OBID i- -
Mid Range Readers (ID ISC.MR101 / ID ISC.MR200)
Maximum reading distance of 30-40 cm
3,60 m connection cable
Antenna can be used also with other 13.56 MHz
reader with 50 Ohm impedance
Features:
scan HF
R

Short description and technical information
Handheld Antenna ID ISC.ANTH200/200-
A
Short description Technical data
Housing
Dimensions (WxHxD)
Weight
Protection class
Operating frequency
Transmitting power
Antenna connection
Connection cable
Temperature range
- operation
- storage
Rel. air humidity
Plastic ABS
460 x 200 x 160 mm
350 g
IP 20
13.56 MHz
maximum 2 W
SMA plug (50 Ohm)
RG 58, 50 Ohm, 360 cm
0°C up to 55°C
-25°C up to 85°C
95% (non condensing)
ID ISC.ANTH200/200-Ais a Single Loop Antenna and was
was optimized for operation with OBID i-
Mid Range Readers ID ISC.MR101 and ID ISC.MR200.
With an emited transmitting power of 1 W by the reader
and a transponder size of 45 x 76 mm² with parallel
orientation of the tag, reading ranges of 30-40 cm are
possible.
Operation with other 13.56 MHz readers with an impedance
of 50 Ohm are possible, too.
The maximum reading distance will be realized in the
middle of the antenna. The optimum orientation of the tag
is parallel to the antenna.
scan HF
FEIG ELECTRONIC GmbH
Lange Straße 4, D-35781 Weilburg
Tel.: [phone] / 3109-0, Fax: -99
Internet: http://www.feig.de
e-mail: [e-mail]
2006 FEIG ELECTRONIC reserves the right to change specification without notice at any time
R
C
06/06
ID ISC.MR200
ID ISC.MR101
Side view of the antenna
25°