Feig Electronic ID ISC.ANT1710/690 Crystal Gate Excellence... User manual

Test report no. 19011738 Page 1of 82
EUT: ID ISC.ANT1710690-1.0
Crystal Gate Excellence
FCC ID:
PJMLRM2500
FCC Title 47 CFR Part 15
Date of issue: 2019-05-29
Date: 2019-03-11
Created: P4 Reviewed: P9 Released: P1
Vers. No. 1.19
TÜV NORD Hochfrequenztechnik GmbH & Co. KG
LESKANPARK, Gebäude 10, Waltherstr. 49-51, 51069 Köln, Germany
Tel.: [phone]
Annex acc. to FCC Title 47 CFR Part 15
relating to
FEIG ELECTRONIC GmbH
ID ISC.ANT171090-1.0 Crystal Gate Excellence
Annex no. 5
User Manual
Functional Description
Title 47 - Telecommunication
Part 15 - Radio Frequency Devices
Subpart C –Intentional Radiators
ANSI C63.4-2014
ANSI C63.10-2013

Test report no. 19011738 Page 2of 82
EUT: ID ISC.ANT1710690-1.0
Crystal Gate Excellence
FCC ID:
PJMLRM2500
FCC Title 47 CFR Part 15
Date of issue: 2019-05-29
Date: 2019-03-11
Created: P4 Reviewed: P9 Released: P1
Vers. No. 1.19
TÜV NORD Hochfrequenztechnik GmbH & Co. KG
LESKANPARK, Gebäude 10, Waltherstr. 49-51, 51069 Köln, Germany
Tel.: [phone]
User Manual / Functional Description of the test equipment (EUT)

IDENTIFICATION
M91020-0e-ID-B
=== En de der Li st e f ür T ext m ar ke Dec kb
INSTALLATION
ID ISC.ANT1710/690 Crystal Gate Excellence
Type A and B

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Note
Page 2 of 2
Note
Note
© Copyright 2019 by
FEIG ELECTRONIC GmbH
Lange Strasse 4
D-35781 Weilburg (Germany)
Tel.: [phone]
http://www.feig.de
[e-mail]
With the edition of this document, all previous editions become void. Indications made in this manual may be changed
without previous notice.
Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden
without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the
grant of a patent or the registration of a utility model or design.
Composition of the information in this document has been done to the best of our knowledge.
FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual
and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our
efforts, errors may not be completely avoided, we are always grateful for your useful tips.
The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH
does not give any guarantee promise for perfect function in cross environments and does not give any guarantee for
the functionality of the complete system which incorporates the subject of this document.
FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed
with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants
or as critical components in any life support systems whose failure to perform can reasonably be expected to cause
significant injury to human health. To avoid damage, injury or death the user or application designer must take
reasonably prudent steps to protect against system failures.
FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and
makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any
license under its patent rights nor the rights of others.

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
General Information
Page 3 of 3
General Information Regarding this Document
General Information
•The sign "" indicates extensions or changes of this manual compared with the former issue.
•If bits within one byte are filled with “-“, these bit spaces are reserved for future extensions or for internal testing
and manufacturing functions. These bit spaces must not be changed, as this may cause faulty operation of the
reader.
•The following figure formats are used:
0…9: for decimal figures,
0x00…0xFF for hexadecimal figures,
b0…1 for binary figures.
•The hexadecimal value in brackets “[ ]” marks a control byte (command).
Pos: 7/St euer mod ul e/------------ Sei te nu m br uc h ------------ @ 0\mod_1452083281983_0.docx@ 10032@ @1

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Contents
Page 4 of 4
Contents
Contents
1Safety Instructions 7
2Revision History of Documentation 8
3Instruction on Transportation and Shipping of the Antenna 9
4Maintenance and Cleaning 10
5Performance Features of the ID ISC.ANT1710/690 Antennas 11
5.1 Scope of Delivery .............................................................................................................11
5.1.1 Antenna ID ISC.ANT1710/690 Crystal Gate Excellence Type A ...........................11
5.1.2 Antenna ID ISC.ANT1710/690 Crystal Gate Excellence Type B ...........................11
5.2 Performance Features of the People Counter ID ISC.ANT.GPC....................................12
5.3 Available Antenna Types .................................................................................................14
6Installation and Wiring 15
6.1 Mounting Preparation ......................................................................................................15
6.2 Installing the Antenna......................................................................................................17
6.2.1 Dimensions of the Antenna ...................................................................................17
6.2.2 Drilling the Mounting Holes ...................................................................................18
6.2.3 Installing the Antenna Base and Antenna Body ....................................................19
7Typical Antenna Configuration (Gate Antenna with two Antennas) 20
7.1 Project Notes Antenna.....................................................................................................20
7.2 Project Notes People Counter (GPC) ..............................................................................23
7.3 Gate Configuration and Setup Using Antennas.............................................................25
7.3.1 Required Components ..........................................................................................25
7.3.2 Configuration of a Gate Antenna with Multiplexer .................................................26
7.3.3 Setting the Multiplexer ..........................................................................................31
7.3.4 Setting the Antenna Tuner ....................................................................................32
7.3.5 Interface Connections ...........................................................................................33
7.3.6 Reader Configuration with Multiplexer ..................................................................34

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Contents
Page 5 of 5
7.3.7 Tuning the Gate Antenna......................................................................................37
7.4 Testing the Gate Antenna ................................................................................................38
7.4.1 Checking the Noise Level .....................................................................................38
7.4.2 Reading a Serial Number......................................................................................40
7.4.3 Testing the Performance.......................................................................................41
7.5 Setting the Alarm Indicators (Alarm Buzzer and Alarm LED lights) .............................43
7.5.1 Setting the Alarm Buzzer ......................................................................................43
7.5.2 Setting the LEDs...................................................................................................44
7.5.3 Reader Setting for Alarm Indicators ......................................................................45
7.5.4 Programming a Transponder with the AFI Byte.....................................................47
7.6 Activating a Reader Automatic Mode .............................................................................48
7.7 Automatic Bus Addressing .............................................................................................49
8Installation Gate People Counter ID ISC.ANT.GPC in Antenna No.4 Type B 50
8.1 Installation ID ISC.ANT.GPC-E2 ......................................................................................50
8.2 Installation and Connections ..........................................................................................52
8.3 Configuration and Test ....................................................................................................59
8.3.1 Connecting Several People Counters ...................................................................59
8.3.2 Configuration and Test in ISO Host Mode or Buffered Read Mode .......................60
8.3.3 Configuration and Test in Notification Mode..........................................................63
8.3.4 Using the Trigger Function of the Gate People Counter........................................65
8.3.5 Using the Direction Detection of Transponders with the Gate People Counter......67
8.3.6 Detection Area of the Direction Mode ...................................................................68
9Reader Configuration in Accordance with National RF Regulations 69
10 Technical Data 71
10.1 Antenna ID ISC.ANT1710/690 Type A and B Crystal Gate Excellence..........................71
10.2 People Counter ID ISC.ANT.GPC and ID ISC.ANT.GPC-E2 ...........................................73
10.3 Power Supply ID ISC.NET24V-B ......................................................................................74
11 Approvals 75
11.1 Europe (CE) ......................................................................................................................75
11.1.1 Antenna ID ISC.ANT1710/690 Crystal Gate Excellence....................................75

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Contents
Page 6 of 6
11.1.2 People Counter ID ISC.ANT.GPC .....................................................................75
11.2 USA (FCC) and Canada (IC).............................................................................................76
11.2.1 Antenna ID ISC.ANT1710/690-Crystal Gate Excellence....................................76
11.2.2 People Counter ID ISC.ANT.GPC .....................................................................77
11.3 USA and Canada (UL) ......................................................................................................78
Annex 79
Annex A: Terminal Assignment “Terminal Board”...............................................................79
Annex B: Internal Wiring ........................................................................................................80
===Endeder ListefürT extmarkeNote ===

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Safety Instructions
Page 7 of 7
1 Safety Instructions
Safety Instructions
►The device may only be used for the intended purpose designed by the manufacturer.
►The operation manual should be conveniently kept available at all times for each user.
►Unauthorized changes and the use of spare parts and additional devices which have not been sold or
recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized
measures shall exclude any liability by the manufacturer.
►The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the
device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in
the manual or automatically set parameters for a device or for an incorrect application of a device.
►Repairs may only be executed by the manufacturer.
►Installation, operation and maintenance procedures should only be carried out by qualified personnel.
►Use of the device and its installation must be in accordance with national legal requirements and local
electrical codes.
►When working on devices the valid safety regulations must be observed.
►Please observe that some parts of the device may heat severely.
►Before touching the device, the power supply must always be interrupted. Make sure that the device is
without voltage by measuring. The fading of an operation control (LED) is no indicator for an interrupted
power supply or the device being out of voltage!
►For installation and dismantling you should wear suitable safety gloves, because parts of the antenna
housing could be sharp-edged.
►Special advice for carriers of cardiac pacemakers:
Although this device doesn’t exceed the valid limits for electromagnetic fields you should keep a
minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker.
CAUTION!
•The Antenna-Tuner and the Antenna conductor carry voltages up to 1000 V.
•Do not look directly into the Alarm LED light. There is a danger of injury of the eyes!
NOTE:
The Antenna is not water proof and should not be exposed to rain or humidity.
Under extreme circumstances water could seep into the antenna and damage the electronic circuits.
Pos: 13/S t e u erm o dul e/------------ Seit en u mbr uc h ------------ @ 0\mod_1452083281983_0.docx@ 10032@ @ 1

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Revision History of
Documentation
Page 8 of 8
2 Revision History of Documentation
Revision History of Documentation
Revision Date Description
0 15.04.2019 Initial version