Feig Electronic OBID ID ISC.ANT40/30 User manual

ID ISC.ANT40/30 & ID ISC.ANT100/100
HF-Antenna for RFID proximity reader
•RFID antenna - Impedance: 50 Ω
•Frequency: 13.56 Mhz
•Transmitting power: 500 mW max.
•Data transfer rate up to 424 kbits/s
•Reading distance up to 14 cm (5.87 in)
(ID ISC.ANT100.100)*
•2 pin or U.FL connector option
Pictures show layout with U.FL connector
•Vending
•eTicketing
•eMobility
OBID - RFID by FEIG electronic

For more information, visit:
www.rfidcanada.com
Email: [e-mail]
[phone]
100 mm (3.94 in)
70 mm (2,76 in)
Ø = 3,2 mm (0.13 in) Ø = 3,2 mm (0.13 in)
U.FL connector
)
in)
in
94
2,76
.
3
(
mm
(
mm
100
70
Ø = 3,2 mm (0.13 in) Ø = 3,2 mm (0.13 in)
40 mm (1.58 in)
28 mm (1.10 in)
in)
in)
18
.
71
.
(1
0
mm
mm
30
18
U.FL connector
Pictures show layout with U.FL connector
The external antennas ID ISC.ANT40/30 and ID ISC.ANT100/100 could be
used with all supported HF reader modules of the OBID i-scan®HF und
OBID®classic-pro series (ISO/IEC 14443-A / -B or ISO/IEC 15693).
* The reading ranges depends on the used transponder.
The ranges arebased on an antenna inlay of 76 mm x45 mm (2.99 in x 1.77 in).
Specifications
ID ISC.ANT40/30
Dimensio
ns (W x H)
40 mm x 30 mm (1.58 in x 1.18 in)
Interface
ID ISC.ANT40/30-A 2-pin connector
ID ISC.ANT40/30-U.FL-A U.FL connector
Operating frequency 13.56 MHz
Impedance 50 Ω
Transmitting power 500 mW max.
Max. reading distance up to 7 cm* (2.76 in)*
Data transfer rate
up to 424 kbit/s
Power supply unneeded
Environmental conditions
Operation
-
25 °C to +70 °C
(
-
13°F to +158°F)
Storage -40 °C to +85 °C (-40°F to +185°F)
Relative humidity
0 %
-
95 % (noncondensing)
ID ISC.ANT100/100
Dimensions (W x H) 100 mm x 100 mm (3.94 in x 3.94 in)
Interface
ID ISC.ANT100/100-A 2-pin connector
ID ISC.ANT100/100
-
U.FL
-
A
U.FL connector
Operation frequency 13.56 MHz
Impedance
50
Ω
Transmitting power 500 mW max.
Max. reading distance up to 14cm* (5.87 in)*
Data transfer rate
up to 212 kbit/s
Power supply unneeded
Environmental conditions
Operation
-
25 °C to +70 °C
(
-
13°F to +158°F)
Storage
-
40 °C to +85 °C
(
-
40°F
to +185°F)
Relative humidity 0 % - 95 % (noncondensing)
Certifications of conformity
Environment
WEEE
–
2002/96/EC
RoHS –2002/95/EC
Supported products
OBID i-scan®HF ISC.M02-B
ISC.M02.M8-B
OBID®classic-pro CPR.M02.VP/AB-BA
CPR.M0
2.VP/AB
-
CA
CPR40.01-x
CPR44.0x
Subject to modifications.
Rev. 2012 / 02