Fein WSs 12-125 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
March 10, 2004
Angle Grinder
WSs 12-125

FEIN Power Tools
WSs 12-125 Parts List
Item Item Number Description Reqd
10 3-24-31-021-00-7 CLAMP CLAMPING PIECE 1
20 4-30-70-001-00-6 SCREW 2
30 3-24-31-040-00-6 STRAIN RELIEF 1
40 3-07-62-216-99-6 ELECTRONIC (110V) 1
50 4-17-01-001-17-2 BALL BEARING 1
60 3-07-12-088-02-9 BRUSH HOLDER 2
70 3-07-11-136-00-2 CARBON BRUSH 2
80 4-30-70-018-00-9 SCREW 2
90 3-19-01-114-01-4 MOTOR HOUSING 1
100 5-3-273-001-11-7 ARMATURE (110V) 1
110 3-14-28-118-00-7 AIR CONDUCTING RING 1
120 3-24-16-098-00-5 COVER PLATE 1
130 3-18-10-235-00-4 GUARD 1
140 4-30-70-007-00-2 SCREW 4
150 4-30-41-023-04-6 SCREW 4
160 4-24-43-003-04-3 LOCK WASHER 4
170,280 3-38-09-227-01-0 BEVEL GEAR 1
175 3-09-05-070-00-0 CUP SPRING 1
180 6-38-02-178-02-3 CLAMPING FLANGE 1
190 6-38-01-176-01-1 FLANGE 1
200 4-26-16-073-00-5 CIRCLE CLIP 1
210 3-09-05-067-01-5 CUP SPRING (24PCS) 1
220 3-09-01-340-00-1 SPRING 1
230 4-17-01-108-22-2 BALL BEARING 1
240 3-28-05-158-00-0 LEVER 1
250 3-24-19-112-00-0 BEARING PLATE 1
260 3-24-16-099-00-9 COVER PLATE 1
270 3-26-24-116-01-4 SHIM 1
290 3-02-20-056-00-0 THRUST PIECE 1
300 3-34-06-275-00-4 DRIVE SHAFT 1
310 3-24-14-111-00-2 THRUST PLATE 1
320 4-26-16-070-00-9 SECURING RING 1
340 4-24-46-019-00-9 SPRING WASHER 4
350 3-26-36-037-00-8 THRUST PIN 1
360 3-09-05-069-00-8 BREAK DISK 4
370 4-26-16-035-00-1 SECURING PIN 1
380 3-02-17-318-00-2 THRUST PIN 1
390 3-26-36-036-00-4 RING 1
400 3-05-07-220-00-0 BUSHING 2
410 3-02-16-144-00-7 LOCKING BOLT 1
420 4-17-05-032-00-4 NEEDLE BEARING 1
430 3-12-06-107-00-2 GEAR HOUSING 1
440 3-28-05-157-00-2 QUICK CLAMPING LEVER 1
450 4-17-01-007-03-8 BALL BEARING 1
460 3-09-07-062-00-9 SPRING 1
480 3-28-05-156-00-8 SLIDING SWITCH 1
490 5-1-273-001-11-5 FIELD COIL (110V) 1
500 4-30-70-017-00-1 SCREW 2
510 3-28-16-053-00-8 SWITCH LOCK 1

520 3-28-16-052-00-4 SWITCH ROD 1
530 4-30-41-039-09-9 SCREW 2
540 3-07-01-218-00-3 ON/OFF SWITCH 1
550 3-12-01-100-00-9 COVER 1
560 3-14-15-082-00-4 BOLSTER 1
570 3-14-13-007-00-7 PROTECTIVE SLEEVE 1
580 3-07-05-035-01-3 CABLE 1
590 3-21-19-107-01-6 HANDLE 1