Fein MSh 636-1 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
April12, 2004
MSh 636-1
Die Grinder

FEIN Power Tools
MSh 636-1 Parts List
Item Item Numbe
r
Descriptio
n
Reqd
10 3-19-01-017-00-7 MOTORHOUSING 1
20 3-28-16-025-00-3 SWITCH BAR 1
30,40 3-28-05-118-01-3 SWITCH SLIDE 1
60 5-1-203-004-11-5 FIELD COIL 1
80 4-30-02-025-99-1 SCREW 2
90 3-14-28-007-00-1 AIR CONDUCTING RING 1
100 3-07-12-055-01-1 BRUSH HOLDER (RIGHT) 1
101 3-07-12-056-01-4 BRUSH HOLDER (LEFT) 1
110 3-07-11-062-00-1 CARBON BRUSH 2
130 4-30-41-007-99-0 SCREW 2
140 3-07-01-060-00-0 SWITCH 1
150 3-07-22-037-00-4 CAPACITOR 1
160 4-30-03-013-99-1 CYLINDRICAL SCREW 1
175 3-07-07-101-01-2 CABLE 1
180 3-14-13-142-00-9 CABLE PROTECTING SLEEVE 1
190 3-24-31-021-00-7 CABLE CLAMP 1
200 4-30-41-001-99-4 SCREW 2
210,211 3-24-27-028-00-6 COVER 1
211 3-14-15-042-00-8 SWITCH PADDING 1
220 4-30-66-002-99-2 SCREW 1
230 4-30-03-025-99-2 SCREW 1
260-310 5-3-203-003-11-9 ARMATURE 1
300 3-34-12-026-00-2 CLUTCH SHAFT 1
310 4-30-64-001-99-3 SCREW 3
330 4-17-01-001-17-2 BALL BEARING 2
350 3-15-10-042-00-5 NECK HOUSING 1
370 3-34-03-047-00-6 DRIVE SHAFT 1
380 3-24-08-020-00-8 DISC 1
390 3-06-01-047-00-8 FELT RING 1
400 3-24-11-051-00-7 COVER PLATE 1
410 4-17-01-020-13-0 BALL BEARING 1
420 3-09-05-026-00-6 SPRING 2
430 4-26-16-013-00-1 SNAP RING 1
440 3-05-14-078-00-5 SLEEVE 1
450 4-17-01-204-09-5 BALL BEARING 1
460 4-02-21-001-00-9 FITTING KEY 1
470 3-01-02-045-00-0 CLUTCH 1
480 6-32-07-059-00-6 COLLET 6MM 1
6-32-07-088-00-9 COLLET 1/4" 1
510 3-15-06-193-00-1 INTERMEDIATE 1
530 4-02-21-001-00-9 FITTING KEY 1
540 3-01-02-045-00-0 CLUTCH 1
550 3-01-02-046-00-3 INTERMEDIATE CLUTCH 1
560 4-30-02-021-99-2 SCREW 4
570 4-24-43-002-99-2 LOCK WASHER 4