Felton REFLEX RHSKCSRA User manual

INSTALLATION GUIDE - AUSTRALIA
REFLEX SINGLE SPRAY SLIDE SHOWER RHSKCSRA
WHAT IS IN THE PACK
2 x Wall Anchors
1 x Flow Restrictor
& Sleeve1 x Hose
2 x Screws 1 x Elbow
1 x Soap Dish
1 x Adjustable
Bracket
1 x Fixed
Bracket
1 x Single Spray
Handpiece
Warranty, Maintenance and Care YOUR COPY TO KEEP
Felton Australia Pty Limited guarantees these mixers to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. Fair wear and tear is
expressly excluded. This warranty is eective for five (5) years from the date of purchase and covers the supply of replacement parts only, not including installation. You must retain
proof of purchase of the Mixer (such as an invoice or receipt) and provide this to Felton on request. This warranty is for manufacturing defects only and does not cover any damage to
the product due to abuse, negligence or improper installation. This warranty is given on the understanding that the product is installed and operated according to Felton’s installation
guide and the Australian/New Zealand standard AS/NZS3500. This warranty is provided to persons who are defined as a “consumer” under the Australian Consumer Law only and for
use in domestic/residential dwellings only (not for commercial use).
At no stage should any surface coatings be cleaned with cleaning agents that contain a corrosive acid or a scouring additive. Surface coatings should be cleaned with
liquid detergent or soap and water. Any damage caused through the use of an unsuitable cleaner will not be covered by this warranty. This warranty is subject to any
other rights or remedies that you may have under the Australian Consumer Law (or any other applicable legislation) and to Felton’s Terms of Trade.
Please fill in the details below, attach your receipt to this installation guide and keep as your proof of purchase.
Purchased at: ...............................................................................................................................................................................................................................................................................................
Date of purchase: .......................................................................................................................................................................................................................................................................................
Installed by: ...................................................................................................................................................................................................................................................................................................
061218AD
Felton Australia Pty Ltd www.feltontapware.com.auPO Box 4191 Burwood East Victoria 3151, Australia
For technical assistance please ring: 1800 792 760

Hold the rail and
position the bottom
bracket into the desired
position (max distance
655mm C-C).
Screw the plastic
tightener into place.
Fit bracket caps.
Screw the elbow into the water outlet (wingback).
Sealant required on thread to achieve a water tight
seal. For Mains Pressure, fit flow restrictor into the
handpiece first. Screw the hose onto the elbow and
handpiece and attach the handpiece to the slider on
the rail.
1. 3. 4. 5.2.
Max 655 Centre - Centre
Max 655
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
Remove the bracket
cap and unscrew the
plastic tightener.
Remove the
adjustable bracket from
the rail.
Mount the adjustable
bracket into the top
bracket position (either
into a new pre-drilled
hole or existing hole).
Fit soap dish onto the
rail from the bottom.
Slide the rail into the
top bracket.
6. 8. 9.7.
INSTALLING INTO CONCRETE/BRICK WALL...
Pre-drill holes to the desire position
(Max 655 Centre - Centre) and fit the
wall anchors then follow the above
instruction.
Mount the bottom bracket
into place. Ensure that
both rail and bracket are
secured. It is recommend-
ed that silicone sealant be
used to seal the fixing
brackets.