Firegear 326-930 User manual

Model: 326-930
Driftwood Twig Instructions
Description: Beach washed and twisted driftwood twigs six (6) piece set. Capable with any fi re pit. Weight
approximately 22lbs.
Read instructions carefully and place logs directly on a lava rock or glass media base inside of fi re pit.
1. When installing logs into linear fi re pits or outdoor fi replaces it is recommended to keep logs out of the direct contact
of fl ame. Fig. 2 shows a suggested log placement, however this location can be changed for personal preference.
2. When installing into a round or square fi re pit, logs can be placed in any position to achieve desired look. See Fig. 3.
A
B
D
C E F
Fig. 2 Suggested location of logs in a linear fi re pit or outdoor fi replace.
A
B
C
D
E
F
Fig. 1 Log identifi cation
REV. 5-15-17
Firegear Outdoors: Driftwood Twigs

Maintenance: Over time twigs can accumulate soot when they are in direct contact with fl ame from the fi re pit. This is
normal and should be cleaned periodically. Twigs can be cleaned by removing them from the fi re pit and using a brush to
remove the soot.
FOR TECHNICAL
SERVICE, CALL:
Firegear Outdoors
9230 Conservation Way
Fort Wayne, IN 46809
For Sales: [phone]
WEB SITE: www.fi regearoutdoors.com
[phone]
REV. 5-15-17
Firegear Outdoors: Driftwood Twigs
Fig. 3 Round or square fi re pit placement.
Fig. 3
Round or square fi re pit placement.