Fisher-Price K3799 User manual

Please keep this instruction sheet for future reference,
Please keep this instruction sheet for future reference,
as it contains important information.
as it contains important information.
Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6)
Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6)
alkaline
alkaline
batteries for the remote (batteries not included).
batteries for the remote (batteries not included).
Adult assembly is required.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
Tool required for assembly: Phillips screwdriver (not included).
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “D” (LR20) alkaline batteries for the mobile and two
“AA” (LR6) alkaline batteries for the remote (batteries not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.com
™
K3799
L1346

2
WARNING
• Possible entanglement injury. Keep out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product will not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• The mobile portion of a product may be used from birth until 5 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Always attach with all provided fasteners (clamp) tightly to a crib or playpen according to the
instructions. Check frequently.
Consumer Information

3
Remote 3 Leaves
3 Soft Toys
Clamp
Base
Arm
Crib Adaptor
Mobile Hub
Note: All of the screws used to assemble this toy are located in the product.
Follow these instructions carefully to fully secure the screws.
Tighten and loosen all screws with a Phillips screwdriver. Do not overtighten.
Parts

4
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib adaptor and remove it first.
• Insert three “D” (LR20) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the base will require replacement
more often than the batteries in the remote. When sounds or light become faint or movement of
the mobile is sluggish, it’s time for an adult to replace the batteries in the base.
Base Battery Installation
Battery Compartment
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. K3799a-0920
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

5
Battery
Compartment
• Locate the battery compartment on the back of the remote.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert two “AA” (LR6) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
IMPORTANT! If the mobile does not respond to the remote, it does not mean that the battery
power in the remote is low. Replace the batteries in the remote if the LED signal indicator on the
remote is dim when the button is pressed. If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the batteries in the battery compartment to
make sure they are properly installed.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
Remote Battery Installation

6
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information
1.5V x 3
“D” (LR20) 1.5V x 2
“AA” (LR6)

7
Assembly
Crib Adaptor
• Fit the crib adaptor to the base.
• Tighten the four screws in the crib adaptor.
• First press the button next to the socket and then slide the socket door open .
• Fit the arm into the socket in the base.
• Tighten both screws in the arm.
Arm
Base
Base
 PRESS
Socket
2
1

SLIDE

8
Assembly
• Fit the mobile hub onto the end of the arm.
• Tighten both screws in the arm to secure the mobile hub.
Hint: You may want to attach the soft toys to the mobile hub before assembling the arm to the
mobile hub. Please refer to assembly step 5 for instructions to assemble the soft toys.
Mobile Hub
3

9
• “Snap” the leaves into the slots in the mobile hub.
Leaves
• Fit the soft toys to the pegs on the underside of the mobile hub.
• Tighten the screw in each toy to secure each to the mobile hub.
Soft Toys
Assembly
4
5

10
Crib Attachment
Base Crib Top Rail
Clamp
• Fit the base onto the crib top rail, so that the threaded peg extends outside the crib.
• Fit the clamp onto the threaded peg and turn the clamp clockwise to secure the base to the crib.
• Do not over-tighten the clamp.