Fisher-Price Learning Patterns Changing Sensations Mobile... User manual

Please keep this instruction sheet for future
reference, as it contains important information.
Requires four “AA” (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
73478
www.fisher-price.com

Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA 73478c-0920
Possible entanglement injury:
•Keepoutofbaby’sreach.
•Removemobilefromcriborplaypenwhenbabybeginsto
pushuponhandsandknees.
•Thisproductwillnotattachtoallcribdesigns.Donotadd
additionalstringsorstrapstoattachtoacriborplaypen.
WARNNG
• Use as a mobile from birth to 5 months.
• A crib mobile is intended for visual stimulation and not to be grasped by the child.
• Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or
playpen according to the instructions. Check frequently.
CANADA
Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

3
Parts
Clamp
Lower Arm
Upper Arm
Canopy
with Soft Toys
#6 x 1/2" Screw
Shown Actual Size
Note: Tighten and loosen the screw with a
Phillips screwdriver. Do not over-tighten screw.
Thisproductcontainssmallpartsinitsunassembledstate.
Adultassemblyisrequired.
CAUTION

4
Battery Installation
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
• Locate the battery compartment door
on the upper arm of the mobile.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert four “AA” (LR6) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries!
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of
batteries safely. Do not dispose of the
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1.5V x 4
“AA” (LR6)

5
• Position the canopy so that it curves up.
• Slide the canopy onto the upper arm all
the way to the color wheel as shown.
1
Assembly
• Rotate the canopy down onto the
color wheel.
• Align the canopy slots with the color
wheel tabs. Press the canopy onto the
color wheel to fit into place.
2
Color Wheel
Upper Arm
Canopy
Color Wheel
Canopy
Canopy
Slots
Color Wheel
Tabs

6
Attaching the Mobile to a Crib
• Fit the slot in the upper arm onto the tab on
the lower arm. Press firmly to “snap” and join
the two parts.
• To be sure these parts are secure, try to pull
the upper and lower arms apart. If the arms
separate, repeat this assembly step while
being sure to press the parts firmly together.
• Insert the #6 x 1/2” screw into the hole in the
upper arm as shown. Tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• Fit the mobile against the top crib rail so that
the end of the threaded peg extends out of
the crib.
• Fit the clamp onto the threaded peg and turn
the clamp clockwise to secure the mobile to
the crib rail. Do not over-tighten the clamp.
Upper Arm
Slot
Lower Arm
Tab
Top Crib Rail
Threaded
Peg
Clamp
1
2
3

7
Use
• Locate the music switch on the upper arm.
• Slide the switch to Jungle Style Music ;
Traditional Lullabies or to turn music off.
• Locate the power/volume switch on the
mobile upper arm.
• The switch has three positions: off ;
on with low volume and on with high
volume .
• Slide the power/volume switch to the off
position when not in use.
• Locate the start button on the upper arm.
• Press the start button to activate the mobile.
• The soft animal toys slowly spin. The color
wheel revolves to display stimulating patterns
and music plays (if selected).
• The mobile will play for approximately
five minutes.
• To restart the mobile, press the start
button again.
1
2
3
Music Switch
Power/Volume
Switch
Start Button

8
Care
• Surface wash only. Wipe with a clean
cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
United States Only
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could
void the user's authority to operate
the equipment.
FCC Statement