Fisher-Price DHW02 User manual

DHW02
Keep this instruction sheet for future reference,
as it contains important information.
Requires three AA batteries (included).
Batteries included are for demonstration purposes only.
Adult assembly is required.
Tool required: Phillips screwdriver (not included).
fisher-price.com
Not to be used by children over
36 months (due to seat height).
WARNING!

2
©2016 Mattel. All Rights Reserved. DHW02-0970
PRINTED IN MEXICO 1100776815-DOM
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.
Care
• Wipe with a clean cloth dampened with a mild
soap and water solution. Do not immerse.
• Periodically inspect this product for wear
or damage. Check all nuts and bolts, and
tighten as needed. Replace worn or broken
parts immediately.
Consumer Information

3
Frame 2 Front Axles
Seat
Assembled Parts
2 Front Wheels
(Smaller)
2 Hubs
2 Rear Wheels
(Larger)
M4,5 x 1,9 cm Screw - 11
Shown Actual Size
Note: Tighten and loosen all
screws with a Phillips screwdriver.
Do not over-tighten screws.
Head
This package contains small
parts. For adult assembly only.
CAUTION

4
Front Axle
Front Wheel
(Smaller)
Assembly
4
2
1
• Slide a front wheel onto a front axle.
• Turn the frame over and fit the front axle
assembly onto the front of the frame.
• Insert three screws and tighten.
• Repeat steps 1 and 2 to assemble the
remaining front wheel and front axle.
• Turn the frame upright.
• At an angle, fit the peg on one side of the seat
into the slot in the frame. Push to "snap" the
other peg in place.
Rear Wheel
(Larger)
Hub
3
• Fit a rear wheel onto the rear axle.
• Fit a hub into the center of the rear wheel.
• Insert a screw into the center of the hub
and tighten.
• Repeat this procedure to attach the other
rear wheel and hub.
Frame
Seat
BOTTOM VIEW
TOP FRONT VIEW

5
Assembly
5
7
6
• Push the back of the seat to "snap" in place.
• Fit the head onto the frame.
• While holding the head in place, turn the
frame over.
• Insert three screws into the holes in the
frame and tighten.
BACK VIEW
BOTTOM VIEW
FRONT VIEW

6
1,5V x 3
AA (LR6)
Battery Replacement
• Locate the battery compartment on the back
of the lion.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door.
• Remove the exhausted batteries and
dispose properly.
• Insert three AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• If this product begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and then back on.
• When sounds/lights become faint or stop,
it’s time for an adult to change the batteries.
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely.
Do not dispose of the product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
For longer life, use alkaline batteries.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.

7
Press lion's nose
Press lion's nose
for fun lights with
for fun lights with
phrases or music!
phrases or music!
Ready, set, GO!
• Slide the power/volume switch:
ON with low volume
ON with high volume
OFF
• Adult supervision is required.
• Never use near steps.
• Choose areas for riding that are free
of obstacles.
• Learn to stop safely.
• Use with caution as this product requires
skill to operate safely to avoid falls,
collisions, and injuries to yourself (the rider)
and others.
Open the lion's mouth
Open the lion's mouth
to drop a ball in and
to drop a ball in and
hear more fun phrases
hear more fun phrases
or music!
or music!
Press a button on the
Press a button on the
lion's mane to hear its
lion's mane to hear its
number. Press the same
number. Press the same
button again to hear its
button again to hear its
color. Press the button
color. Press the button
a third time to hear its
a third time to hear its
number, then count the
number, then count the
tones you hear!
tones you hear!
Hear phrases, music or sound
Hear phrases, music or sound
effects when you push the lion.
effects when you push the lion.

8
Rider to Walker
• Pull out the latch on the back of the seat and
lift the seat 1.
• Lift the support 2.
• Push down on the handle to "snap" it to the
support 3. Lift the handle to be sure it's
secure to the support,
Only an adult should convert this product.
1
2
3
Walker to Rider
Only an adult should convert this product.
• Pull out the latch on the back of the seat and
lift the seat 1.
• Lower the support and lower the seat 2.
• Push down on the seat to "snap" in place 3.
1
2
3