Fisher-Price imaginext A NEW ADVENTURE EVERY TIME! User manual

B0139
A NEW ADVENTURE EVERY TIME!™
Instructions
www.fisher-price.com

2
Preschool children will enjoy using all parts of this toy to build structures of
their own creation. At first they will need parental assistance to build the
structure on the front cover. It may be easier to use our step-by-step
instructions and give your preschooler only the parts that will be assembled
in each step.The more your child plays with this toy, and development and
skill increases, the less assistance your child will need!
Please keep this instruction sheet for future reference,
as it contains important information.
For children 4-10 years.
The Imaginext™system lets your child’s
imagination come alive. With easy snap
together panels, kids can build different
structures in lots of different ways.
se some of the parts or all of them!
Welcome to the
Imaginext™System

Proper label application will help to keep the labels looking their best!
When applying labels, keep the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surfaces of this toy with a clean, dry
cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied.
Let’s Build It!
Warning – Choking Hazard
Not recommended for children
under 3 years because it contains
small parts that can be swallowed.
WARNING
• Do not launch the projectile at close range.
• Only use the projectile supplied with this toy.
• Do not fire at people or animals.
CAUTION
3

4
Here are a few basic tips of the Imaginext System!
Building System Tips
1. Posts Up
Posts should always face up on walls.
2. Locate Snaps
Look at the platforms carefully and note the locations of the snaps.
3. Walls Before Platforms
Assemble walls before attaching to platforms.
4. Use Spacers Between Walls that Connect to Platforms
Walls joined side-by-side may require a spacer between them when
connected to two single platforms, or one double-wide platform.
1.
Posts
Wall
2. 3. 4.
Snap
Platform
Wall
Assembly
Platform
Spacer
Walls Double-wide
Platform

Building System Tips
5. Build Up
Build the bottom layer first, then build additional layers.
6. Platforms In-between Layers
Use a platform between each layer of your design.
7. Spacers Between Assemblies
Use a spacer to connect assemblies when needed.
8. Sockets and Posts
Accessory pieces with a socket fit on any post. Accessory pieces with
a large peg fit into hex-shaped sockets or on top of any post.
5. 6. 7. 8.
Layer 1
Layer 2
Layer 2
Platform
Layer 1
Spacer
Assembly Post
Socket
Hex-shaped
Socket
Large
Peg
Post
5

2.
1.
Let’s Build It!
6
123 4
5

4.
3.
Let’s Build It!
7

8
6.
5.
Let’s Build It!

8.
7.
Let’s Build It!
9

10
10.
9.
Let’s Build It!