Fisher-Price J7343 Brilliant Basics Guide

www.fisher-price.com
J7343
Musical
Magnetic Easel
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" batteries (included).
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver (not included).

This product contains
small parts in its
unassembled state.
Adult assembly is required.
CAUTION
3.5mm x 12mm Screw – 4
SHOWN ACTUAL SIZE
Note: Tighten or loosen all
screws with a Phillips screwdriver.
Do not over-tighten the screws.
Easel 2 Front Legs
2 Back Legs Basket
2
Parts not shown: 8 Magnets
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052 U.S.A. PRINTED IN CHINA
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. J7343b-0920
Parts

• Fit the basket onto the pegs on the
bottom of the easel.
1
1
• Fit the front legs into the sockets in
the back of the easel.
• Insert two screws into the legs
and tighten.
• Fit the back legs onto the front legs.
1
3
• Insert two screws into the back legs
and tighten.
1
4
Pegs
1
2
Front Legs
Back Legs
3
Assembly

• Slide the power/volume switch on the side
of the toy to either on with low volume
or on with high volume .
• Choose a scene on either side of the
attached page. The page also flips back,
out of the way.
• Add magnets to the easel. Press the
magnets for sounds and music.
• Press the lever to release the magnets
into the basket and start over.
• Use your own paper to create
original drawings.
• When you are finished playing with this toy,
slide the power/volume switch off .
Note: This product contains magnets.
Do not use around items that are sensitive
to or affected by magnetic fields.
Power/ Volume
Switch
4
P
R
E
S
S
Matching Shapes and Musical Fun!

For best performance, we recommend
replacing the batteries that came
with this toy with three, new alkaline
“AA” (LR6) batteries.
• Locate the battery compartment on
the back of the easel.
• Loosen the screws in the battery
compartment door and remove the
battery compartment door.
• Remove the exhausted batteries and
throw them away. Insert three "AA"
(LR6) alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screws.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries!
In exceptional circumstances, bat-
teries may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the prod-
uct. Dispose of batteries safely.
Do not dispose of this product in a
fire. The batteries inside may
explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
1.5V x 3
“AA” (LR6)
Shown Actual Size
5
Battery
Replacement
Battery Safety
Information
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities
(Europe only).

(United States Only)
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications
not expressly approved by the
manufacturer responsible for
compliance could void the user’s
authority to operate the equipment.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
• Wipe this toy with a clean cloth
dampened with a mild soap and
water solution. Do not immerse
this toy.
• This toy has no consumer
serviceable parts. Do not take
this toy apart.
6
Care
Consumer
Information
FCC Statement
Visit us on line at
www.service.fisher-price.com
Call Fisher-Price®Consumer Relations,
toll-free at 1-800-432-5437,
9 AM - 7 PM EST Monday through
Friday and 11 AM - 7 PM EST Saturday.
Hearing-impaired consumers using
TTY/TDD equipment, please calll
1-800-382-7470.
Write to us at:
Fisher-Price®
Consumer Relations
636 Girard Avenue
East Aurora, New York 14052