Fisher-Price MCQueen User manual

Owner's Manual
Owner's Manual
with Assembly Instructions
with Assembly Instructions
For Model T3639
For Model T3639
Product features may vary from the picture above.
Please read this manual and save it
Please read this manual and save it
with your original sales receipt.
with your original sales receipt.
Tools needed for assembly: Phillips
Tools needed for assembly: Phillips
Screwdriver, and slotted screwdriver
Screwdriver, and slotted screwdriver
(tools not included).
(tools not included).
Use only with a Power Wheels
Use only with a Power Wheels
®
®
6 Volt
6 Volt
(4.0 Amp/Hr.) Rechargeable Battery
(4.0 Amp/Hr.) Rechargeable Battery
with Built-in Thermal Fuse and
with Built-in Thermal Fuse and
a Power Wheels
a Power Wheels
®
®
6 Volt (4.0 Amp/Hr.)
6 Volt (4.0 Amp/Hr.)
Charger (both included).
Charger (both included).
Requires one "AA" (LR6)
Requires one "AA" (LR6)
alkaline
alkaline
battery (not included) for sound
battery (not included) for sound
box operation.
box operation.

2
T3639a-0920
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride At Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- Away from swimming pools and other bodies of water to prevent drownings.
- Generally level to prevent tipovers
- Away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
RIDING HAZARD
ELECTRICAL HAZARD
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a re resulting in
serious injury and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a re or explosion resulting
in serious injury.
- Use of Power Wheels®components in products other than Power Wheels®
vehicles could cause overheating, re or explosion.
• The battery must be handled by adults only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults
only. A child could be injured by the electricity involved in charging the battery.
• Never lift or carry the battery by the wires or connector. This can damage the
battery and possibly cause a re resulting in serious injury. Lift and carry the
battery by the case only.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage
each time you charge the battery. If damage or excessive wear is detected, do not
use the charger or the battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.•
DANGER
WARNING
WARNING
IMPORTANT INFORMATION

T3639a-0920
3
IMPORTANT INFORMATION
Read this manual carefully for important safety•
information and operating instructions before using
your vehicle. Keep this manual for future reference,
as it contains important information.
The vehicle is designed for use on grass, asphalt,•
and other hard surfaces; on generally level terrain;
and by children 12-36 months of age and older.
Do not exceed the maximum weight capacity of
40 lbs (18 kg).
Your new vehicle requires adult assembly. Please set•
aside 20 minutes for assembly.
Use this vehicle• ONLY outdoors. Most interior floor-
ing can be damaged by riding this vehicle indoors.
Fisher-Price®will not be responsible for damage to
the floor if the vehicle is used indoors.
You must charge your battery for 18-30 hours•
before you use your vehicle for the first time. We
recommend charging your battery before beginning
assembly. Please see the Battery Charging section for
detailed instructions.
The battery charger is not a toy.•
Do not short circuit the battery.•
Adults Note:• Regularly examine the charger for
damage to the cord, plug, housing or other parts that
may result in the risk of fire, electric shock or injury.
In the event of any damage, do not use the charger
until the damage has been properly repaired.
Your Power Wheels• ®6 volt battery is equipped
with a built-in thermal fuse. The thermal fuse is
a self-resetting safety device which automatically
“trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, release the button
on the steering wheel and wait approximately 25 seconds
before operating the vehicle again. To avoid repeated
automatic shut-downs, avoid severe driving conditions.
If a thermal fuse in a battery continually trips under•
normal driving conditions, please contact your local
Power Wheels®Authorized Service Center.
To prevent damaging the motors and gears, teach your•
child to stop the vehicle before switching direction.
If you have any questions about your Power Wheels• ®
vehicle, please call our toll-free service lines at
1-800-348-0751. Trained customer service
representatives are available to take your call in
English or French. Habla Español? Si usted tiene
alguna pregunta ó necesita asistencia llame gratis
1-800-348-0755 para los Estados Unidos. Tenemos
representantes que hablan español para atender
su llamada.
For your convenience, Power Wheels• ®maintains
an independently owned and operated Authorized
Service Center Network with more than 300 authorized
service centers nationwide. Our authorized service
centers will repair or replace parts under warranty at
no extra charge, and can perform non-warranty repairs
for a minimal charge. To find the authorized service
center nearest you, please visit us online at
www.powerwheels.com or call 1-800-348-0751.
Please visit us online at• www.powerwheels.com to
register your vehicle.

4
T3639a-0920
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than
return this product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that
no parts are discarded.
Vehicle Steering
Wheel
6 Volt (4.0 Amp/Hr.)
Charger
6 Volt (4.0 Amp/Hr.)
Battery
PARTS
Shown Actual Size
Hint: For your convenience,
we've included an extra screw!
#8 x ¾" Screw - 1

T3639a-0920
5
PARTS PICTURE
Note: Fastener not shown.

6
T3639a-0920
Use the charger in dry locations only.
ELECTRICAL HAZARD
BATTERY CHARGING
• Battery can fall out and injure a child
if vehicle tips over. Always use
battery retainer.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a re
resulting in serious injury and could
also ruin the electrical system.
- Use of the wrong type battery
or charger could cause a re or
explosion resulting in serious injury.
- Use of Power Wheels®components
in products other than Power Wheels®
vehicles could cause overheating,
re or explosion.
• The battery must be handled by
adults only. The battery is heavy and
contains sulfuric acid (electrolyte).
Dropping the battery could result in
serious injury.
• Never allow children to charge the
battery. Battery charging must be done
by adults only. A child could be injured
by the electricity involved in charging
the battery.
• Never lift or carry the battery by the
wires or connector. This can damage
the battery and possibly cause a re
resulting in serious injury. Lift and
carry the battery by the case only.
• Read the safety instructions on
the battery.
• Examine the battery, charger and
their connectors for excessive wear
or damage
each time you charge the
battery. If damage
or excessive wear
is detected,
do not use the charger or
the battery until you have replaced the
worn or damaged part.
WARNING
CAUTION
Loosen the screws in the seat back with a•
Phillips screwdriver.
Pull the seat back forward and lift to remove the seat.•
1
2
Make sure you charge the battery for at least 18 hours•
using the enclosed Power Wheels®6 volt charger
before operating your vehicle for the first time. Charge
the battery for at least 14 hours after each use of the
vehicle. Never charge the battery longer than 30 hours.
Failure to follow these instructions may damage your
battery and will void your warranty.
Use only a Power Wheels• ®6 volt (4.0 Amp/Hr.)
charger with “6V” connector (input 120 VAC, 60Hz,
with an output of 6 VDC) to charge your Power Wheels®
6 volt battery.
Loosen these screws.

T3639a-0920
7
Battery must be upright
while charging.
Plug the battery connector into the charger connector.•
Plug the charger into a standard wall outlet.•
Notes:
- If power flow to the wall outlet is controlled by
a switch, make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the
charger into a ceiling outlet.
Once the battery is charged, disconnect the battery•
connector from the charger connector. Unplug the
charger from the wall outlet. Refer to the Battery
Installation section for instructions on installing
your battery. If your battery is already installed in
your vehicle, simply re-connect the motor harness
connector to the battery.
You do not need to remove the battery from your•
vehicle to recharge it.
Before charging the battery, examine the battery case•
for cracks and other damage which may cause sulfuric
acid (electrolyte) to leak during the charging process.
If damage is detected, do not charge the battery or use
it in your vehicle. Battery acid is very corrosive and
can cause severe damage to surfaces it contacts.
Do not place the battery on a surface (such as kitchen•
counter tops) which could be damaged by the acid
contained inside the battery. Take precautions to
protect the surface on which you place your battery.
Charge the battery in a well ventilated area.•
To replace the seat, please refer to page 12 in the•
Battery Installation section.
Remove the #8 x ¾" screw from the battery retainer.•
Lift to remove the battery retainer from the vehicle.
Lift to remove the battery from the battery compartment.•
3
4
BATTERY CHARGING

8
T3639a-0920
Plug the motor harness connector from the vehicle•
into the steering wheel connector.
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle’s unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
Motor Harness
Connector
Steering Wheel
Connector
1
ASSEMBLY
WARNING
While carefully feeding the wire down into the dash,•
fit the steering wheel onto the dash.
2
SIDE VIEW
Turn the steering wheel slightly to access the hole in•
the side of the steering column.
Insert the #8 x• 3/4" screw into the hole on the side of
the steering column. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Hint: For your convenience, there is a hole in each side
of the steering column and an extra #8 x ¾" screw.
You will only need to use one screw on one side of the
steering column to fasten the steering wheel.
3
Fit a slotted screwdriver into the slot on the steering•
wheel, as shown.
Carefully remove the steering wheel cover from the•
steering wheel.
4
Slot
Steering
Wheel Cover

T3639a-0920
9
Loosen the screw in the battery compartment door•
with a Phillips screwdriver. Remove the door.
Insert a "AA" (LR6)• alkaline battery.
Hint: We recommend using an alkaline battery for
longer battery life.
Replace the battery compartment door and tighten•
the screw.
Fit the steering wheel cover on the steering wheel and•
push to snap in place.
If the sound box begins to operate erratically, you may•
need to reset the electronics. Remove the battery and
replace it.
When sounds become faint or stop, it's time for an•
adult to change the battery.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
Do not mix old and new batteries or batteries of•
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
Insert batteries as indicated inside the•
battery compartment.
Remove batteries during long periods of non-use.•
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode
or leak.
Never short-circuit the battery terminals.•
Use only batteries of the same or equivalent type•
as recommended.
Do not charge non-rechargeable batteries.•
Remove rechargeable batteries from the product•
before charging.
If removable, rechargeable batteries are used, they are•
only to be charged under adult supervision.
Protect the environment by not disposing•
of this product with household waste
(2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
ASSEMBLY
1,5V x 1
“AA” (LR6)
5

10
T3639a-0920
3
10
65
9
4
2
FRONT VIEW
DECORATION
Wipe the vehicle with a clean, dry cloth to remove any•
oils before applying labels.
Apply labels exactly as shown in the illustrations. For•
best results, avoid repositioning the label after it has
been applied.
Starting at the center of a label rub firmly with a dry•
cloth, and smooth towards the outer edges to remove
air bubbles.
LEFT VIEW
RIGHT VIEW
7
BACK VIEW
8
11 12
1

T3639a-0920
11
• Place the Power Wheels®6 Volt (4.0 Amp/Hr.) battery
in the battery compartment. Make sure the battery
connector extends toward the rear of the vehicle.
4
IMPORTANT! Use only a Power Wheels®6 volt
(4.0 Amp/Hr) rechargeable battery. Use of any other
battery will damage your vehicle.
BATTERY INSTALLATION
1
2
Loosen the screws in the seat back with•
a Phillips screwdriver.
Grasp the seat back and lift firmly to remove the seat.•
6 Volt (4.0 Amp/Hr.)
Battery
• Remove the #8 x ¾" screw from the battery retainer.
Lift to remove the battery retainer from the vehicle.
3
Battery Retainer
Loosen
these
screws.

12
T3639a-0920
• Plug the battery connector into the motor
harness connector.
Note: If the battery connector will not plug into the
motor harness connector, turn it over and try again!
Do not force the battery connector into the motor
harness connector.
6
BATTERY INSTALLATION
• Re-assemble the seat to the vehicle. Tighten the screws
in the seat back with a Phillips screwdriver.
IMPORTANT! Always remember to keep the fasteners
tightened at all times to prevent children from accessing
the battery.
7
• Replace the battery retainer over the battery. Insert the
#8 x ¾" screw through the battery retainer and into
the vehicle. Tighten the screw.
5
Tighten
these
screws

T3639a-0920
13
Your Power Wheels• ®battery is a non-spillable sealed
lead-acid battery. It must be recycled or disposed of in
an environmentally sound manner.
Do not dispose of a lead-acid battery in a fire. The•
battery may explode or leak.
Do not dispose of a lead-acid battery in your regular,•
household trash. The incineration, landfilling or mixing
of sealed lead-acid batteries with household trash is
prohibited by law in most areas.
Protect the environment by not disposing of this•
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).
Return an exhausted battery to a federal or state approved•
lead-acid battery recycler, such as a Power Wheels®
authorized service center or a local seller of
automotive batteries. For the authorized service
center location nearest to you, please visit us online
at www.powerwheels.com or call 1-800-348-0751.
Contact your local waste management officials for
other information regarding the environmentally
sound collection, recycling and disposal of lead-acid
batteries. If you live in the State of Florida or the State
of Minnesota, it is prohibited by law for anyone to
throw away lead-acid batteries in the municipal
waste stream.
If a battery leak develops, avoid contact with the
leaking acid and place the damaged battery in a plastic
bag. See next section for proper disposal.
If acid comes in contact with skin or eyes, flush with
cool water for at least 15 minutes and call a physician.
If acid is internally ingested, give water, milk of
magnesia or egg whites immediately. Never give emetics
or induce vomiting. Call a physician.
Do not allow the battery to run down completely•
before charging.
Charge the battery before storing the vehicle, and at•
least once per month, even if the vehicle has not
been used.
Charge the battery after each use, regardless of how•
long the vehicle was used.
Leaving the battery in a discharged condition will•
ruin it.
Always remove an exhausted battery from the vehicle.•
Battery leakage and corrosion can damage the vehicle.
Do not store the battery in temperatures above 75° F•
or below -10° F.
BATTERY DISPOSAL
Check all screws and their protective coverings•
regularly and tighten as required. Check plastic parts
on a regular basis for cracks or broken pieces.
During snowy or rainy weather, the vehicle should be•
stored inside or under a protective cover.
Avoid operating the vehicle in wet or snowy•
conditions, and do not spray the vehicle with a hose.
Water or moisture in the motors or electrical switches
can cause them to corrode, and could cause switch or
motor failure.
Avoid operating the vehicle on sand, loose dirt or•
gravel. Sand, loose dirt or gravel in the motors or
electrical switches can cause them to jam, and could
cause switch or motor failure.
The vehicle can be wiped down with a soft, dry cloth.•
For a shiny fi nish, you can wipe plastic parts with
a non-wax furniture polish applied to a soft cloth.
Do not use automotive wax. Do not use soap and
water or spray the vehicle with a hose.
To ensure your vehicle stays in good operating order,•
we recommend you periodically have your vehicle
checked by a Power Wheels®authorized service center.
BATTERY CARE VEHICLE CARE

14
T3639a-0920
RIDING HAZARD
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride At Night.
• Keep Children Within Safe
Riding Areas.
These areas must be:
- away from swimming pools
and other bodies of water to
prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines,
cars, roads and alleys.
• Riding Rules
Make sure children know and
follow these rules for safe driving
and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
Before children use this vehicle, an adult should
carefully evaluate the driving area as well as the child’s
skill level and ability to drive the vehicle safely. Teach
appropriate safety rules to your child before allowing
operation of this vehicle. These rules should also be
reviewed with other playmates who want to drive
the vehicle.
A child who is not sitting on the seat could fall off,•
cause a tip over or block the driver’s view.
Only operate the vehicle in the daytime in a well-lit area.•
Driving near steep inclines can cause:•
- The vehicle to gain unsafe speed, even if the button
is released to stop.
- The vehicle to tilt and tip over
- The wheels to lose traction, causing the vehicle
to slip.
- The vehicle could roll backwards at an unsafe speed.
Never put anything near any moving parts. Rotating•
parts, such as motors, gear boxes and wheels,
can snag fingers, hair, etc., causing serious injury.
Do not allow operation of the vehicle when it is on its•
side or in an upside-down position.
Do not operate the vehicle near flammable vapors•
(gasoline, paint thinner, acetone, liquid wax, etc.).
The vehicle’s electrical switches, like most electrical
switches, emit an internal spark when first turned on
or turned off, which could cause an explosion or fire.
To prevent unsupervised use of the vehicle, disconnect•
the motor harness from the battery when the vehicle is
not in use.
SAFE DRIVING RULES
WARNING
Use vehicle on generally level ground ONLY!

T3639a-0920
15
• Press the drive button on the steering wheel. The
vehicle drives forward at a maximum speed of 2 mph.
• Help your child practice steering to learn how far and
how quickly to turn the steering wheel when driving.
• To stop, release the drive button.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
Press the sound button for sounds and music.•
See the instructions in the next section to change the•
mode to English, Spanish or sounds only.
Sounds and
Sounds and
Language Switch
Language Switch
VEHICLE OPERATION
1
2
3
Fit a slotted screwdriver into the slot on the steering•
wheel, as shown.
Carefully remove the steering wheel cover from the•
steering wheel.
Slide the language switch to:• 1for engine sounds;
2for Spanish and engine sounds; or 3for English and
engine sounds.
Carefully replace the steering wheel cover and push to•
snap in place.
Drive ButtonSound Button

16
T3639a-0920
Bumper-to-Bumper* Limited Warranty
*One year limited warranty from the date of
purchase on the Power Wheels®vehicle.
Six month limited warranty on the
6 volt battery.
For the original purchaser, this one year limited warranty
covers the Power Wheels®ride-on vehicle (purchased
from Power Wheels®) against defects in materials and
workmanship. The six month limited warranty applies
only to the 6 volt battery included by Power Wheels®
with the original purchase of the vehicle.
This warranty covers normal use and does not cover
the Power Wheels®vehicle or battery if damaged by
unreasonable use, neglect, accident, abuse, misuse,
improper service or other causes not arising out of
defects in materials or workmanship. Evidence of any
attempt at consumer repair will void this warranty.
THIS WARRANTY DOES NOT COVER, AND IS INTENDED
TO EXCLUDE, ANY LIABILITY ON THE PART OF
POWER WHEELS®, WHETHER UNDER THIS
WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT
OR CONSEQUENTIAL DAMAGES FOR BREACH OF
WARRANTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION SO THIS LIMITATION MAY
NOT APPLY TO YOU.
Should you need service or assistance with your vehicle
during the warranty period, do not return the vehicle to
the store. Power Wheels®has provided a nationwide
network of authorized service centers. If there is not an
authorized service center in your area, please visit us
on-line at www.powerwheels.com or call Consumer
Relations for information, 1-800-348-0751.
This warranty gives you specific legal rights, and you
may also have other rights which may vary from state
to state.
PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
(United States Only)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian
ICES-003. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions suivantes: (1) il
ne doit pas produire de brouillage et (2) l’utilisateur
du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
LIMITED WARRANTY FCC STATEMENT

T3639a-0920
17
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below.
If you still experience a problem, please contact Power Wheels®Consumer Relations, toll-free at 1-800-348-0751.
Or, contact your local Power Wheels®authorized service center. For the location nearest you, please visit us online
at www.powerwheels.com.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
Vehicle does not run Undercharged battery Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the rst time. After rst-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector is
tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power ow to the wall outlet is “ON”.
Charger is not working There is no sure way to tell if your charger is working
unless you have a volt meter. If you suspect there
is a problem with your charger, contact your local
Power Wheels®authorized service center. They can
test your charger for you.
Tripped thermal fuse The built-in thermal fuse may "trip" and shut down
operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe. Once a fuse has "tripped",
release the button on the steering wheel and wait
approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not
overload the vehicle by exceeding the 40 lb maximum
weight capacity or by towing anything behind the vehicle.
Do not drive up hills or run into xed objects, which can
cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually
trips, contact your local Power Wheels®authorized
service center.
Loose wires or loose connectors Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor connector and
that there are no loose wires around the motors.
Dead battery If your battery is old or if you have not followed Battery
Care instructions, your battery may be dead. If you are
unsure whether or not the battery is dead, you can have
it tested at your local Power Wheels®authorized
service center.
Electrical switch damage The electrical switches can become corroded due to
exposure to water or moisture, or can jam due to loose
dirt, sand or gravel. Contact your local Power Wheels®
authorized service center for diagnosis and repair.
Motor damage Contact your local Power Wheels®authorized service
center for diagnosis and repair.

18
T3639a-0920
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
Vehicle was running but
suddenly stopped
Loose wires or loose connectors Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor connector,
and that there are no loose wires around the motors.
Tripped thermal fuse The built-in thermal fuse may "trip" and shut down
operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe. Once a fuse has "tripped",
release the button on the steering wheel and wait
approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not
overload the vehicle by exceeding the 40 lb maximum
weight capacity or by towing anything behind the vehicle.
Do not drive up hills or run into xed objects, which can
cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually
trips, contact your local Power Wheels®authorized
service center.
Short run time (Less than
1 - 3 hours per charge)
Undercharged battery Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the rst time. After rst-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the charger connector,
and that the charger is plugged into the wall.
Make sure power ow to the wall outlet is “ON”.
Overcharged battery Do not charge the battery longer than 30 hours. If
you suspect that your battery is damaged as a result
of overcharging, contact your local Power Wheels®
authorized service center. They can test the battery
for you.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with
a Power Wheels®6 Volt (4.0 Amp/Hr.) battery with built-in
thermal fuse. Do not substitute parts.
Tripped thermal fuse The built-in thermal fuse may "trip" and shut down
operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe. Once a fuse has "tripped",
release the button on the steering wheel and wait
approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not
overload the vehicle by exceeding the 40 lb maximum
weight capacity or by towing anything behind the vehicle.
Do not drive up hills or run into xed objects, which can
cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually
trips, contact your local Power Wheels®authorized
service center.

T3639a-0920
19
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the rst time. After rst-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector is
tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power ow to the wall outlet is “ON”.
Battery needs charging Be sure to charge the battery after each use.
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with
a Power Wheels®6 Volt (4.0 Amp/Hr.) battery with built-in
thermal fuse. Do not substitute parts.
Vehicle is overloaded Make sure you do not overload the vehicle by allowing
more than one rider at one time, exceeding the 40 lb.
maximum weight capacity, or by towing objects behind
the vehicle.
Driving conditions are too stressful Use only on generally level ground.
Sometimes the vehicle
doesn’t run, but other times
it does
Loose wire or connector Check all wires around the motors and all connectors to
make sure they are tight.
Motor or electrical switch damage Contact your local Power Wheels®authorized service
center for diagnosis and repair.
When the button is
pressed, the vehicle won’t
run without a push
Loose wire or connector Check all wires around the motors and all connectors to
make sure they are tight.
“Dead Spot” on motor Contact your local Power Wheels®authorized service
center for diagnosis and repair.
Battery’s thermal fuse
constantly "trips", but the
vehicle is not overloaded
nor the driving conditions
too severe
Damaged battery Contact your local Power Wheels®authorized service
center for diagnosis and repair.
Loud clacking or grinding
noise from a motor-gearbox
Broken gears Contact your local Power Wheels®authorized service
center for diagnosis and repair.
Charger gets warm
during use
It is normal for some chargers to get
warm during use and is not reason for
concern. Some chargers do not get
warm during use.
No action required.
If your charger does not get warm during use, it does not
mean that it is not working properly.
Battery makes a sizzling
or gurgling noise
when charging
It is normal for some batteries to make
noise and swell slightly while charging
and is not reason for concern.
No action required.
If your battery does not make noise or swell slightly
during charging, it does not mean that it is not accepting
the charge.

Or contact your local independently owned and operated
Power Wheels®Authorized Service Center.
For the location nearest you, visit us on-line at www.powerwheels.com.
©Disney/Pixar
Visit the Disney website at www.disney.com
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ®and ™ designate U.S. trademarks of Mattel, Inc. unless otherwise indicated.
PRINTED IN MEXICO T3639a-0920
Before first-time use,
you must charge the battery
18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle is not used or stored.
Do not return
your vehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751