Fisher-Price X2917 User manual

X2917
Please keep this instruction sheet for future reference,
as it contains important information.
Requires one “AA” battery (included) for operation.
Battery included is for demonstration purposes only.
Adult assembly is required for crib attachment and battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
The penguin and fishy toy are surface washable only.
Wipe with a clean, damp cloth. Do not immerse.
fisher-price.com
Press for music!
Press for music!

Battery Replacement
For best performance, we recommend
replacing the battery that came with
this toy with one new “AA” (LR6)
alkaline battery.
• Locate the battery compartment door
on the back of the fishy toy. Loosen
the screws in the door with a Phillips
screwdriver and remove the door.
• Remove the exhausted battery and
dispose of it properly.
• Insert a new “AA” (LR6)
alkaline battery.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If the fishy toy begins to operate
erratically, you may need to reset the
electronics. Remove the battery and
reinstall it.
• When sounds become faint or stop,
it’s time for an adult to change
the battery.
1,5V
“AA” (LR6)
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.

WARNING
PREVENT
ENTANGLEMENT INJURY
This product may not
attach to all crib designs.
Do not add additional
strings or straps to attach
to a crib or playpen.
Crib Attachment and Musical Fun
• Push the panel on the back of
the penguin.
• Clip the fishy toy to the penguin.
IMPORTANT! Always attach all
provided fasteners (strings, straps,
clamps, etc.) tightly to a crib or
playpen according to the instructions.
Check frequently.
• Place the penguin near the crib top
rail. Tie together the straps on the top
of the penguin. Make sure the straps
are tied securely to the crib top rail.
Note: It is better to tie the straps in
a knot than a bow, since a bow may be
easily untied.
1
2
Tummy Time Fun
• Remove the penguin toy from the
crib. Pull the panel on the back of the
penguin and place on the floor for
tummy time fun!
3

©2012 Mattel. All Rights Reserved.
PRINTED IN CHINA X2917a-0920
Consumer Information
ICES-003
• This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce
dispositif est autorisée seulement
aux conditions suivantes : (1) il ne
doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage
radioélectrique reçu, même si
ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.