Fisher-Price Miracles & Milestones Rhymes-Go-Round Mirror... User manual

1
Rhymes-Go-Round™Mirror
www.fisher-price.com
J0126
Instructions
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries for operation (included).
An adult must attach toy to a crib and replace batteries.
Tool required for battery replacement: Phillips screwdriver (not included).
Rhymes-Go-Round™Mirror

For best performance, we recommend
replacing the batteries that came with
this toy with three, new alkaline “AA”
(LR6) batteries.
• Locate the battery compartment on the
back of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three, new “AA” (LR6)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• If sounds, lights or motions become faint
or stop, it's time for an adult to change
the batteries.
2
Battery
Replacement
Battery Compartment Door
In exceptional circumstances, batteries
may leak fluids that can cause a chemi-
cal burn injury or ruin your product.
To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-recharge-
able batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
Battery Safety
Information
Back View

Attachment Strap
2
Crib Attachment
3
Note: It is better to tie the strap and
strings in a knot than a bow, since a
bow may be easily untied.
IMPORTANT! Always use the straps provided to attach this toy to a crib. Do not add
additional strings or straps to attach to crib.
String
• Tie the toy’s attachment strap to
top crib rail.
• Tie the toy’s strings around a
crib spindle.
Back View

To prevent entrapment of baby’s head, keep distance
between the bottom of the product and the
crib mattress to at least 7 inches.
4
Crib Attachment
• If the distance between the
toy and the mattress is less
than 7 inches, lower the
crib mattress.
Mattress
At least
7 inches
WARNING
4
Bottom of Toy

Gentle Music and Soft Lights
Power/Volume Switch
• Locate the power/volume switch
on the top of the toy.
• Slide the switch to the desired
position: Off ; on with low
volume ; or on with high
volume .
Mode Switch
Locate the mode switch on the top
of the toy.
Handle Activated
Mom or baby can pull down
on the handle for lights, music
and to make the mouse move
around the mirror.
Baby Activated
When baby taps the toy,
lights flash, longer music
plays and the mouse “runs”
around the mirror.
5
Tummy Time Play
• For sitting babies, remove the toy
from the crib and place on the
floor for lots of busy activities.
Mode Switch Power/Volume Switch
Top View

Call Fisher-Price®Consumer Relations,
toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment,
please call 1-800-382-7470. Write to us at:
Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora,
New York 14052.
Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user's authority to operate the equipment.
Consumer Information
• To clean, wipe the surface of this toy with
a damp cloth. Do not immerse this toy.
• Do not drop this toy on a hard surface.
• This toy has no consumer serviceable
parts. Please do not take this toy apart.
Care FCC Note
(United States Only)
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. J0126pr-0920
© 2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Visit us on line at
www.service.fisher-price.com