Fisher-Price Time to Cook Barbie Kitchen C5352 User manual

C5352
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Requires three “AA” (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.com
TM
Time to Cook™Barbie™Kitchen

Parts
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
Refrigerator Shelf
#8 x 3/4" Screw – 28 #8 x 13/4" Screw – 2
Fasteners Shown Actual Size
Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
Parts Not Shown
2 Forks
2 Spoons
2 Plates
2 Teacups
2 Clock Cards
Spatula
Large Spoon
Skillet
Bowl
Pitcher
Pitcher Lid
Cake Slice
Cookie
Pizza Slice
Sandwich
Chicken Leg
Label Sheet
Microwave Housing ▲
Upper Shelf ▲
Countertop Microwave Door
Oven Door
Utensil Shelf
Plate Shelf
Sink
Refrigerator HandleMicrowave Handle
Refrigerator Bottom
Refrigerator Door
Base
Window Assembly
2 Refrigerator Sides
Lower Shelf ★
2
Short Post ▲
Faucet
Phone
Faucet Handle
Oven Housing ★
Oven Handle
Serving Tray
3 Oven Knobs
Long Post ★

Assembly
•Position refrigerator side with the tabs down.
•Slide the refrigerator shelf (ribbed side down) into the groove
in the refrigerator side.
Refrigerator Shelf
Refrigerator Side
Tabs
Groove
Refrigerator Side
1
•Fit the other refrigerator side to the shelf and refrigerator
side assembly.
2
3
•Insert two #8 x 3/4" screws into the refrigerator assembly
and tighten.
3
#8 x 3/4" Screw - 2
4
•Position the refrigerator assembly on its side. Insert two
#8 x 3/4" screws into the holes on the back of the refrigerator
assembly, as shown. Tighten the screws.
#8 x 3/4" Screw - 2

•Insert a #8 x 3/4" screw into the lower hole inside the
refrigerator assembly, as shown.
•Tighten the screw to secure the lower shelf.
8
•“Snap” the refrigerator assembly into the base.
•Pull up on the refrigerator assembly to be sure it is secure.
Assembly
5
6
7
•“Snap” the refrigerator bottom into the base, as shown.
Lower Shelf
•Locate the lower shelf, marked with a ★. Position the lower
shelf with the ribbed side down.
•Fit the lower shelf onto the base, as shown.
Refrigerator Assembly
Base
#8 x 3/4" Screw
4
Refrigerator Bottom
★

Assembly
9
•Turn the assembly over so the bottom is facing you.
•Insert one #8 x 3/4" screw into the post in the base,
as shown.
•Tighten the screw to secure the lower shelf.
•Turn the assembly upright.
5
Bottom View
Back View
#8 x 3/4" Screw
10
•“Snap” the long post, marked with a ★, into the lower shelf.
Long Post
★
11
•“Snap” the oven housing, marked with a ★, into the lower
shelf, as shown.
Oven Housing
12
•From the back of the toy, insert two #8 x 3/4" screws into the
oven housing and tighten.
#8 x 3/4" Screw - 2
★

Assembly
13 15
Upper Shelf
Upper Shelf
•Locate the upper shelf, marked with a ▲. Position the
upper shelf with the ribbed side down.
•Fit the upper shelf onto the long post and oven housing,
as shown.
6
•“Snap” the short post, marked with a ▲, into the upper shelf.
Short Post
14
•Insert a #8 x 3/4" screw into the upper hole inside the
refrigerator assembly, as shown.
•Tighten the screw to secure the upper shelf.
16
•“Snap” the microwave housing, marked with a ▲into the
upper shelf, as shown.
#8 x 3/4" Screw
▲
Microwave Housing
▲
▲

Assembly
17
•From the back of the toy, insert two #8 x 3/4" screws into the
microwave housing. Tighten the screws to secure the
microwave housing.
7
#8 x 3/4" Screw - 2
18
•Place the countertop on a flat surface with the ribbed side
facing up and the large opening to the left.
•Position the main assembly upside down over the counter-
top with the posts to the right.
•“Snap” the main assembly into the countertop as shown.
Countertop
Large Opening
Post
•With the front of the assembly facing you, insert three
#8 x 3/4" screws through the main assembly and into
the countertop.
•Tighten the screws to secure the countertop.
Bottom View
#8 x 3/4" Screw - 4
20
•Turn the assembly around so the back of the assembly
is facing you.
•Insert four #8 x 3/4" screws through the main assembly
and into the countertop. Tighten the screws to secure
the countertop.
•Turn the assembly upright.
Bottom View
#8 x 3/4" Screw - 3
19
Bottom View

Assembly
#8 x 3/4" Screw - 4
22
•Turn the assembly over so the bottom is facing you.
•Insert four #8 x 3/4" screws through the main assembly and
into the window assembly, as shown.
•Tighten the screws to secure the window assembly.
•Turn the assembly upright.
•Fit the refrigerator handle to the refrigerator door and hold
it in place.
•Insert two #8 x 3/4" screws through the refrigerator door and
into the refrigerator handle.
•Tighten the screws to secure the refrigerator handle.
Bottom View
23 #8 x 3/4" Screw - 2
#8 x 3/4" Screw - 2
24
•Fit the oven handle to the oven door and hold it in place.
•Insert two #8 x 3/4" screws through the oven door and into
the oven handle.
•Tighten the screws to secure the oven handle.
#8 x 3/4" Screw - 2
25
•Fit the microwave handle to the microwave door and hold it
in place.
•Insert two #8 x 3/4" screws through the microwave door and
into the microwave handle.
•Tighten the screws to secure the microwave handle.
Refrigerator Door
Refrigerator
Handle
Microwave Door
Microwave Handle
Oven Door
Oven Handle
•“Snap” the window assembly into the slots in
the countertop.
21
8
Window Assembly
Countertop

Assembly
•At an angle, fit the right oven door peg into the right hole in
the main assembly .
•Then, “snap” the left door peg into the left hole in the main
assembly .
26 27
•At an angle, fit the lower microwave door peg into the lower
hole in the main assembly .
•Then, “snap” the upper microwave door peg into the upper
hole in the main assembly .
28
•At an angle, fit the upper refrigerator door peg into the upper
hole in the main assembly .
•Then, “snap” the lower refrigerator door peg into the lower
hole in the main assembly .
Oven Door
Microwave Door
Refrigerator Door
9







29
•First, “snap” the large flower oven knob into the center hole
in the countertop .
•Then, “snap” the remaining two oven knobs into the holes
on either side of the large flower oven knob .
•Position the assembly so the back side is facing you.
•Fit the utensil shelf to the window assembly, as shown.
•Fit the plate shelf to the window assembly, as shown.
30
#8 x 13/4" Screw - 2
31
•Insert a #8 x 13/4" screw into each shelf.
•Tighten the screws to secure the shelves.
33
•Place the sink in the large opening in the countertop.
•Place the phone in the opening on the side of the clock.
•Place the serving tray onto the countertop.
Plate
Shelf
Utensil Shelf
Window Assembly
Serving
Tray
Phone
Sink
Back View
Front View
10
Assembly
32
•Fit the hole in the faucet over the post on the sink as shown.
•Insert and “snap” the peg on the bottom of the faucet
handle into the sink post.
Sink Post
Faucet
Faucet Handle
Peg

