Fisher-Price SMARTCYCLE RACER T3857 User manual

T3857
www.fisher-price.com
Please keep this owner's manual for future reference, as it contains important information.
Requires four “D” (LR20) alkaline batteries (not included) for operation.
Age: 3-6 years
This product is intended for indoor use only.
Use ONLY alkaline batteries for longest battery life.
P HYSICAL L EARNING A RCADE S YS TEM

2
Get up. Get smart. Get going!
It’s a stationary bike, a learning center, and an arcade game
system – all rolled into one! Smart Cycle®plugs right into
your TV, ready to take kids on learning adventures like no
other. As they pedal, favorite character friends guide them
through learning discoveries, games, and even exciting races.
Drive
Pedal, steer and learn at your own
pace – visit Math Mountain, Shape Lake,
Number Fields, Letter Creek and other
stops along the way.
Learn
Stop and rest, but don’t stop
learning! Use the joystick to rein-
force important learning skills with
plenty of games and activities – with
different levels for growing kids.
Race
Put the pedal to the metal as you
race with cars on-screen, against
the clock, or with another player!
Safety Tips
• Always sit on the seat.
• Always wear shoes.
• Only one (1) rider at a time.

3
Learning Adventure
Game Cartridge
with Key Ring
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten screws.
Shown Actual Size
Parts
Back Base
(Large)
Handlebar
Front Base
(Small)
Adult assembly is required. Tool needed for assembly:
Phillips screwdriver (not included).
Seat Post
Pedal Assembly
Frame Cover (with Bolt)
Seat
Frame
with Console
#8 x 1,25" Screw - 14
Plug-and-Play Cord

4
Fit the pedal assembly into the groove in•
the underside of the frame, as shown.
Hint: The pedal assembly is designed to
only fit one way. If it does not seem to fit,
turn it around and try again.
Insert four screws into the pedal assembly.•
Fully tighten the screws.
Assembly
1
This product contains
small parts in its
unassembled state. Adult
assembly is required.
CAUTION
Pedal
Assembly
Frame
Front Base
(Small)
2
Fit the front base (small) onto the bottom•
of the frame, as shown.
Hint: The front base is designed to fit onto
the frame one way. If it does not seem to fit,
turn it around and try again.
Insert four screws into the front base•
and tighten.
Seat Post
Rear Base
(Large)
3
Fit the rear base (large) onto the end of the•
seat post, as shown.
Hint: The rear base is designed to fit onto
the seat post one way. If it does not seem to
fit, turn it around and try again.
Insert two screws into the rear base•
and tighten.

5
Assembly
4
Frame Cover
(with Bolt)
Insert the frame cover with bolt into the•
hole on the side of the frame assembly.
Fully tighten the bolt.•
5
Handlebar
Fit the handlebar onto the frame,•
as shown.
Hint: The handlebar will only fit one way
onto the console. If it does not seem to fit,
turn it around and try again!
Insert two screws into the handlebar•
and tighten.
Pull up on the handlebar to be sure it•
is secure.
6
Turn both the frame and seat post•
assemblies upright.
Fit the seat post assembly onto the•
frame assembly.
Insert two screws into the seat post•
and tighten.
Hint: You may want to insert the frame
cover with bolt into the frame assembly
before inserting and tightening screws in
the post.

6
For your child's comfort, the seat can•
be adjusted to any of three seat heights
(upper slots for shorter children and lower
slots for taller children).
To remove the seat, press the tabs•
underneath and lift.
Replace the seat at the desired height and•
push down on the seat to be sure it is
secure in the slots in the seat post.
Assembly
8
Seat
At an angle, fit the upper tabs on the front•
of the seat into the slots on the seat post.
Lower the seat to fit the bottom tabs on•
the seat into the slots on the seat post.
You should hear a "click".
Push down on the seat to be sure it•
is secure.
7Seat Height 3
(Shortest)
Seat Height 2
Seat Height 1
(Tallest)

7
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
toy before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 4
“D” (LR20)
Locate the battery compartment on front•
of the frame. Loosen the screw in the
battery compartment door and remove
the door.
Insert four “D” (LR20)• alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life and
proper function.
Replace the battery compartment door•
and tighten the screw.
If this product begins to operate erratically,•
you may need to reset the electronics.
Slide the power switch off and then back on.
When function is erratic or stops,•
or you see a low battery symbol on your
TV screen , it’s time for an adult to
change the batteries!
Protect the environment by not•
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery Installation

8
Insert the game cartridge into the socket•
on top of the cycle console. Push to be
sure it is fully inserted.
Hint: You can easily attach other cartridges
(sold separately and not included) to the
key ring.
Turn your TV or VCR/DVD player•
power ON.
Slide the power switch on the cycle to•
ON .
To find the picture on your TV screen,•
set your TV's or VCR/DVD player's mode
selector to INPUT or VIDEO IN.
Hint: The plug-and-play cord is designed
to easily disconnect if it is pulled. Simply
connect the matching connectors in the
middle of the cord.
Connecting Smart Cycle®
to your TV
Important! Your TV or VCR/DVD player
must have audio and video input jacks
(located on the front or back of your TV or
VCR/DVD).
Plug the audio-video pins into the•
matching colored input jacks on your
TV or VCR/DVD player (Yellow for Video
In, White for Audio In).
TV
INPUT
AUDIO IN
LEFT
VIDEO IN
VCR/DVD
OR
White
Yellow
TV
Place the Smart Cycle• ®in front of
your TV.
Insert the plug on the end of the plug and•
play cord into the socket on the front of
the cycle.
Key Ring

9
Power Switch
Slide the switch to
ON or OFF O.
Handlebar
Use for steering on the road or in games.
Horn Button
Press to make
a selection or
hear the horn.
Snap Shot Button
Press to make a selection
or take "pictures" (see
page 11).
Joystick
Use to make
selections on
the menus or
in activities.
Map Button
Press to see a map
of all activities
(see next page). Exit Button
Press to exit the activities.
Travel Journal Button
Press to see the
pictures you took
along your journey.
Getting Started
on the Learning Adventure

10
• You can travel down the road and head onto an off-ramp to access activities or simply
press the map button to visit any of the activities around the course.
NOTICE ABOUT EPILEPSY AND SEIZURES PLEASE READ THIS NOTICE BEFORE YOU OR
YOUR CHILD USE ANY VIDEO GAME.
A very small portion of the population has a condition, which may cause a momentary loss of
consciousness when viewing certain kinds of flashing lights or patterns that are commonly
present in our daily environment. This condition may cause seizures while watching some
kinds of television pictures or playing certain video games. Players who have not had any
previous seizures may nonetheless have an undetected epileptic condition.
If you or anyone in your family has experienced symptoms linked to an epileptic condition
(e.g. a seizure or loss of awareness), consult your physician before playing video games.
We recommend that parents observe their children while they play video games. If you or
your child experience any of the following symptoms such as dizziness, altered vision, eye or
muscle twitching, involuntary movements, loss of awareness, disorientation or convulsions,
DISCONTINUE USE IMMEDIATELY and consult your physician.
Additionally, please follow these precautions whenever playing a video game:
• Do not sit or stand too close to the television screen. Play as far back from the screen
as possible.
• Do not play if you are tired or need sleep.
• Always play in a well lit room.
• Be sure to take a 10-15 minute break every hour while playing.
Bonus Activity
Letter Creek
Alphabet Barn
Learning Adventure
Number Fields
Customize Your Vehicle
Math Mountain
Shape Lake
The Big Race
The Map