Fisher-Price V1643 User manual

5
V1643
www.fisher-price.com
Actual product may vary from the photos.
Please keep this instruction sheet for future reference,
as it contains important information.
Requires six "AA" (LR6) alkaline batteries
(not included) for car operation.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
This product is not recommended for use
on loose dirt or wet surfaces.

523
Each track piece has a number on the bottom. Simply match the numbers
and fit the pieces together! For best performance, we suggest assembling the track on a hard, flat surface.
Fit the tunnel onto the bridge track.
Fit the flags into the small sockets and
the sign into the large sockets in the
top of the tunnel.
Fit the billboard posts into the
sockets in the track.
Assembly
Fit the billboard posts into the sockets
in the track.
Fit the barrels into the sockets
on the start track.
V1643
www.fisher-price.com
Actual product may vary from the photos.
Please keep this instruction sheet for future reference,
as it contains important information.
Requires six "AA" (LR6) alkaline batteries
(not included) for car operation.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
This product is not recommended for use
on loose dirt or wet surfaces.

Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN CHINA V1643a-0920
©Disney/Pixar
www.disney.com/toystory
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user's authority to operate the
equipment.
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
CONSUMER ASSISTANC
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
4

5
• Locate the battery compartment door
on the bottom of each car.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three "AA" (LR6) alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• If the toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
• When sounds or motions from the car
become faint or stop, it’s time for an
adult to change the batteries!
1,5V x 6
"AA" (LR6)
• Protect the environment by not
disposing of this product with
household waste (2002/96/
EC). Check your local authority
for recycling advice and facilities
(Europe only).
Battery Installation Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

6
• Lift the both starting gates on the track.
• Set the cars on the arrows behind the
starting line.
• When both cars are ready, press the
pedal and you're off.
Hint: After shaking a car, place it
anywhere on the track and watch it go.
Fun sound effects and lights add
to the excitement!
• When your car stops, pick it up, shake it
and set it down again to rejoin the race.
• When you're finished playing, slide the
power switch on each car OFF .
• Slide the power switch on the bottom of
each car ON .
Race to Win!
Hint: You can also race your cars on any
smooth, flat surface. Shake the car, set it
down and let it go.
• Shake a car to start the "engine" and
the sound effects.
Hint: For maximum distance, shake the
car 7 or 8 times. Shaking more than this
does not increase the distance
it will travel.
1
2
3