Fisher-Price W2622 User manual

IMPORTANT!
IMPORTANT!
Always attach with all provided fasteners tightly to a crib or playpen
Always attach with all provided fasteners tightly to a crib or playpen
according to the instructions. Do not add additional strings or straps to attach to a crib.
according to the instructions. Do not add additional strings or straps to attach to a crib.
Check frequently.
Check frequently.
• The mobile portion of this product may be used from birth until 5 months.
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of this product may be used from birth until 24 months.
• The base portion of this product may be used from birth until 24 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
www.fisher-price.com
Please keep this instruction sheet for future reference, as it contains important
Please keep this instruction sheet for future reference, as it contains important
information. Requires four "C" (LR14)
information. Requires four "C" (LR14)
alkaline
alkaline
batteries for mobile operation and
batteries for mobile operation and
two "AAA" (LR03)
two "AAA" (LR03)
alkaline
alkaline
batteries for remote operation (batteries not included).
batteries for remote operation (batteries not included).
Adult assembly is required. Tool required: Phillips screwdriver (not included).
Adult assembly is required. Tool required: Phillips screwdriver (not included).
Please keep this instruction sheet for future reference, as it contains important
information. Requires four "C" (LR14) alkaline batteries for mobile operation and
two "AAA" (LR03) alkaline batteries for remote operation (batteries not included).
Adult assembly is required. Tool required: Phillips screwdriver (not included).
W2622
IMPORTANT! Always attach with all provided fasteners tightly to a crib or playpen
according to the instructions. Do not add additional strings or straps to attach to a crib.
Check frequently.
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of this product may be used from birth until 24 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.

2
Parts
Arm
Note: All of the screws used to assemble this toy are attached to the product.
Follow these instructions carefully to fully secure the screws. Tighten and loosen all
screws with a Phillips screwdriver. Do not over-tighten the screws.
Base
Crib Connector
Spinner
Mobile Hub
Remote

3
1,5V x 4
“C” (LR14)
• Loosen the screws in the mobile base battery compartment door with a Phillips
screwdriver and remove it.
• Insert four "C" (LR14) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
• Loosen the screw in the remote battery compartment door with a Phillips
screwdriver and remove it.
• Insert two "AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw.
IMPORTANT! Under normal use conditions, the batteries in the mobile base will
require replacement more often than the batteries in the remote. When sounds,
lights, projection or movement become faint or stop, it’s time for an adult to
change the batteries.
• If this product begins to operate erratically, you may need to reset the
electronics. Slide the power/volume switch on the base off and then back on.
Remove the batteries from the remote and reinstall them.
Battery Installation
1,5V x 2
"AAA" (LR03)
Hint: We recommend using alkaline batteries for longer battery life.

4
• Fit the crib connector to the base and tighten both screws.
IMPORTANT! Make sure the straps are over the top of the crib connector.
Crib Connector
Base
1
1
Assembly
1
2
• First, press the button on the mobile base Aand then slide the socket door open B.
• Fit the arm into the socket in the base and tighten both screws.
Arm
Socket
A
PRESS
SLIDE
SLIDE
B

5
Assembly
• Fit the spinner onto the post on the mobile hub. Push to "snap" in place.
• Fit the end of the arm to the socket on the mobile hub.
• Tighten both screws in the arm to secure it to mobile hub.
Arm
Socket
Post
Spinner
1
3
1
4

Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a
chemical burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. W2622a-0920
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

7
IMPORTANT! Always attach with all provided fasteners tightly to a crib or playpen
according to the instructions. Do not add additional strings or straps to attach to a crib.
Check frequently.
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of this product may be used from birth until 24 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
Crib Attachment
WARNING
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• Use ONLY attached to a crib or playpen.

8
Crib Attachment
• Make sure the straps are tightened securely around the crib top rail.
• While pushing the tab at the bottom of the buckle, pull the free end of the strap to
tighten on the crib top rail.
Note: You can secure the free end of the strap to the base.
1
2
PUSH
PUSH
PULL
PULL
• Position the base so that the decorated side faces the inside of the crib. Fit the base onto
or against the crib top rail.
Hint: The base is designed to fit most crib designs. Please refer to the main illustration
and the inset photograph.
• Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through
the crib spindles.
• Buckle the straps. Make sure you hear a “click”.
Crib Top Rail
Base
Buckles
Buckles
1
1

9
Crib Attachment
Remote Use
• Tie the base strings to a crib spindle.
• If the distance between the base and the mattress is less than 7 Inches (18 cm), lower
the crib mattress.
Note: It is better to tie the strings in a knot than a bow, since a bow may be easily untied.
At Least 7 Inches (18 cm)
At Least 7 Inches (18 cm)
Base
Base
1
3
• In the unlikely event that use of the remote interferes with normal use of other remote
controlled equipment, such as televisions or stereos, or use of other electronic or battery
powered appliances interfere with operation of the mobile, do not use both at the same time.
• You may notice a loss of range between the remote and the mobile when using in bright light.
For best performance, avoid using the remote in areas of bright light. Move the mobile, or
reduce the amount of light to improve performance.
• Position the mobile so that the receiver arrow points towards the area that the remote will be
used. Make sure there is a clear path between the remote and the mobile. Point the end of the
remote toward the mobile receiver and press the button.

10
Music Button
Music Button
• Press the button to play a song.
• Press the button again to change
the song.
Twinkling Stars, Soothing Music
and Animal Friends
Power/Volume Switch
Power/Volume Switch
• Slide the switch to:
ON with no sound
ON with low volume
ON with high volume
OFF
Mode Switch
Mode Switch
•Slide the switch to select a mode:
Music Only
Music/Motion/Projection
Music/Motion/Lights
Music/Motion

11
Convert to Soothing Projector
Remove the mobile and use as a soother with projection! When used as a soother,
music and projection are the only modes that can be used.
• Loosen both screws in the arm near the
mobile base. Lift and remove the arm.
• Close the socket door on top of the
mobile base.
• Store the mobile in a safe place for
future use.

12
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.Operation is subject
to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
Consumer Information
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Do not immerse.
• This toy has no consumer serviceable parts. Do not take this toy apart.