Fisher-Price R6302 User manual

Please keep this instruction sheet for future reference,
Please keep this instruction sheet for future reference,
as it contains important information.
as it contains important information.
Requires four “AAA” (LR03)
Requires four “AAA” (LR03)
alkaline
alkaline
batteries (not included) for operation.
batteries (not included) for operation.
Adult assembly is required for battery installation.
Adult assembly is required for battery installation.
Tool required for battery installation: Phillips screwdriver (not included).
Tool required for battery installation: Phillips screwdriver (not included).
www.fisher-price.com
R6302
R6302

Battery
Installation
• Locate the battery compartment on the
bottom of the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert four, new “AAA” (LR03)
alkaline batteries.
Hint: We recommend alkaline batteries for
longer battery life.
• Replace the battery compartment door
and tighten the screw.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and replace them.
• When lights from this toy become faint
or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose
of batteries safely. Do not dispose of
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety
Information
1.5V x 4
“AAA” (LR03)

On-the-go fun!
IMPORTANT! Before first-time use,
completely darken the drawing screen
with the drawing pen. Slide the eraser
lever slowly side to side to clear the
drawing screen. Repeat this procedure
several times to enable the drawing screen
to create the clearest, darkest images.
• Flip up the light and press the button to
light up your drawings!
• The light will stay on for approximately
three minutes. Press the button to turn
the light on again.
• Use the drawing pen to write messages,
create your own drawings or play games.
• To erase the drawing screen, slide the
eraser lever slowly side to side. Now you
can create a new design!
14
2
3
IMPORTANT! To avoid damage to the
drawing screen keep this toy away
from extreme heat sources such as
ovens, heaters and radiators.
Do not apply heavy pressure
or force to the drawing screen.
Heavy pressure is not necessary and
could damage the drawing screen.
A light touch makes a dark line.
Use only the drawing pen included.
Do not use any other object on the
drawing screen.

FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible
for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA R6302pr-0920
Consumer Information
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.