Fisher-Price Bob builder User manual

BATTERY INSTALLATION:
Unscrew and lift away cover from back of helmet.
Replace batteries as indicated inside the battery
compartment. Batteries included are for demonstration
purposes only. For longer life use only alkaline batteries.
If the product begins to malfunction, check the battery
installation. You may need to reset the electronics by
removing the batteries and reinstalling them. If the
product continues to malfunction or no longer operates,
remove the batteries from the toy and replace them with
fresh batteries. Requires 3 "AG13" (LR44) batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak uids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
REQUIRED TOOL:
PHILLIPS SCREWDRIVER
(NOT INCLUDED).
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
1,5V x 3
“AG13” (LR44)
©2016 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of
Mattel, except as noted. PRINTED IN CHINA.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China. Tel.: [phone].
©2016 HIT Entertainment Limited and Keith Chapman.
The Bob the Builder name and character, related characters
and logo are trademarks of HIT Entertainment Limited.
©2016 HIT Entertainment Limited.
HIT and the HIT logo are trademarks of HIT Entertainment Limited.
DTP37
DTP37-0970
11013 6579 4 - DO M
11
0
1
365
794-D
OM
For videos, activities and more, visit:
WW
W
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
W
W
WW
W
W
W
W
W
W
W.
W.
W
W.
W.W.
W.
W.
W.
W.
W.
W.
W.
W.
W.
.
.
BO
BO
BO
BO
BO
BOBO
BO
BO
BO
O
BOBOBO
BO
BO
BO
O
BO
BO
BO
BO
BO
O
BO
B
B
B
B
B
B
B
B
B
B
BT
B
B
B
B
B
B
B
BT
HE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
HE
E
E
E
E
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
U
B
BU
BU
BU
B
B
IL
I
IL
I
IL
IL
I
IL
IL
IL
IL
I
IL
DE
DE
E
R.
R.
R.
R.
R.
R.
R.
R.
R.
R.R.
R
R.
R
R
R
R
R
R
COCOCOCO
COCO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
C
C
O
CO
CO
CO
O
C
C
C
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
WWW.BOBTHEBUILDER.COM fisher-price.com
Keep these instructions for future reference as they contain important information.
SWITCH & FIX BOB
SYMPTOM SOLUTION
Tool does not attach to belt
Tool does not attach to Bob’s tool hand
Tool does not t into Bob’s free hand
The tools are made to fit in only one specific orientation. Make sure the belt is clicked into place and
that the tool is properly aligned with the tool loop on the belt.
Rotate the belt so the belt loop clicks into place. You will know when the tool loops are aligned
properly when they click into place.
The tools are made to fit in only one specific orientation. Make sure the tool is properly aligned with
the opening in Bob’s hand.
x 1
x 1
x 1
x 1
x 1
Each tool can fit in Bob’s
free hand. Ensure the tool
is aligned properly.
Welding mask is
adjustable.
Attach the welding mask to
Bob’s helmet (mask is removable).
Align each tool with a belt loop
and slide into place.
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
Rotate Bob’s belt to select a tool (belt rotates in
either direction).
Press the tool to a surface for lights & sounds.
Press down on Bob’s helmet so his arm lowers and the
selected tool clicks into place, then release.
To unload, ensure the empty spot on Bob’s tool
belt is selected. Press down on Bob’s helmet so
it detaches, then release.
12
34
When selecting a tool, rotate the belt so the tool loop clicks into place.
The 3 tools are made to fit in the tool loops (and Bob’s free hand) in one specific orientation. When manually attaching
tools, align the tool properly and slide into place.
Sheet Size Open: 8.3” x 11.7” (A4)
Sheet Size Folded: 5.8” x 8.3” (A5)
IS Size - Format 2
11.7”
8.3”
front back
Back
4
Cover
1
23
folded
23
Cover
1
23Back
4
Item No : DTP37-0970-1101365794-IS
Version : DOM
Paper : 70 gsm woodfree paper
Color : Black
Date : 08/04/16

BATTERY INSTALLATION:
Unscrew and lift away cover from back of helmet.
Replace batteries as indicated inside the battery
compartment. Batteries included are for demonstration
purposes only. For longer life use only alkaline batteries.
If the product begins to malfunction, check the battery
installation. You may need to reset the electronics by
removing the batteries and reinstalling them. If the
product continues to malfunction or no longer operates,
remove the batteries from the toy and replace them with
fresh batteries. Requires 3 "AG13" (LR44) batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak uids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
REQUIRED TOOL:
PHILLIPS SCREWDRIVER
(NOT INCLUDED).
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
1,5V x 3
“AG13” (LR44)
©2016 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of
Mattel, except as noted. PRINTED IN CHINA.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China. Tel.: [phone].
©2016 HIT Entertainment Limited and Keith Chapman.
The Bob the Builder name and character, related characters
and logo are trademarks of HIT Entertainment Limited.
©2016 HIT Entertainment Limited.
HIT and the HIT logo are trademarks of HIT Entertainment Limited.
DTP37
DTP37-0970
11013 6579 4 - DO M
11
0
1
365
794-D
OM
For videos, activities and more, visit:
WW
W
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
W
W
WW
W
W
W
W
W
W
W.
W.
W
W.
W.W.
W.
W.
W.
W.
W.
W.
W.
W.
W.
.
.
BO
BO
BO
BO
BO
BOBO
BO
BO
BO
O
BOBOBO
BO
BO
BO
O
BO
BO
BO
BO
BO
O
BO
B
B
B
B
B
B
B
B
B
B
BT
B
B
B
B
B
B
B
BT
HE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
HE
E
E
E
E
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
U
B
BU
BU
BU
B
B
IL
I
IL
I
IL
IL
I
IL
IL
IL
IL
I
IL
DE
DE
E
R.
R.
R.
R.
R.
R.
R.
R.
R.
R.R.
R
R.
R
R
R
R
R
R
COCOCOCO
COCO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
C
C
O
CO
CO
CO
O
C
C
C
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
WWW.BOBTHEBUILDER.COM fisher-price.com
Keep these instructions for future reference as they contain important information.
SWITCH & FIX BOB
SYMPTOM SOLUTION
Tool does not attach to belt
Tool does not attach to Bob’s tool hand
Tool does not t into Bob’s free hand
The tools are made to fit in only one specific orientation. Make sure the belt is clicked into place and
that the tool is properly aligned with the tool loop on the belt.
Rotate the belt so the belt loop clicks into place. You will know when the tool loops are aligned
properly when they click into place.
The tools are made to fit in only one specific orientation. Make sure the tool is properly aligned with
the opening in Bob’s hand.
x 1
x 1
x 1
x 1
x 1
Each tool can fit in Bob’s
free hand. Ensure the tool
is aligned properly.
Welding mask is
adjustable.
Attach the welding mask to
Bob’s helmet (mask is removable).
Align each tool with a belt loop
and slide into place.
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
Rotate Bob’s belt to select a tool (belt rotates in
either direction).
Press the tool to a surface for lights & sounds.
Press down on Bob’s helmet so his arm lowers and the
selected tool clicks into place, then release.
To unload, ensure the empty spot on Bob’s tool
belt is selected. Press down on Bob’s helmet so
it detaches, then release.
12
34
When selecting a tool, rotate the belt so the tool loop clicks into place.
The 3 tools are made to fit in the tool loops (and Bob’s free hand) in one specific orientation. When manually attaching
tools, align the tool properly and slide into place.
Sheet Size Open: 8.3” x 11.7” (A4)
Sheet Size Folded: 5.8” x 8.3” (A5)
IS Size - Format 2
11.7”
8.3”
front back
Back
4
Cover
1
23
folded
23
Cover
1
23Back
4
Item No : DTP37-0970-1101365794-IS
Version : DOM
Paper : 70 gsm woodfree paper
Color : Black
Date : 08/04/16

BATTERY INSTALLATION:
Unscrew and lift away cover from back of helmet.
Replace batteries as indicated inside the battery
compartment. Batteries included are for demonstration
purposes only. For longer life use only alkaline batteries.
If the product begins to malfunction, check the battery
installation. You may need to reset the electronics by
removing the batteries and reinstalling them. If the
product continues to malfunction or no longer operates,
remove the batteries from the toy and replace them with
fresh batteries. Requires 3 "AG13" (LR44) batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak uids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
REQUIRED TOOL:
PHILLIPS SCREWDRIVER
(NOT INCLUDED).
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
1,5V x 3
“AG13” (LR44)
©2016 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of
Mattel, except as noted. PRINTED IN CHINA.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China. Tel.: [phone].
©2016 HIT Entertainment Limited and Keith Chapman.
The Bob the Builder name and character, related characters
and logo are trademarks of HIT Entertainment Limited.
©2016 HIT Entertainment Limited.
HIT and the HIT logo are trademarks of HIT Entertainment Limited.
DTP37
DTP37-0970
11013 6579 4 - DO M
11
0
1
365
794-D
OM
For videos, activities and more, visit:
WW
W
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
W
W
WW
W
W
W
W
W
W
W.
W.
W
W.
W.W.
W.
W.
W.
W.
W.
W.
W.
W.
W.
.
.
BO
BO
BO
BO
BO
BOBO
BO
BO
BO
O
BOBOBO
BO
BO
BO
O
BO
BO
BO
BO
BO
O
BO
B
B
B
B
B
B
B
B
B
B
BT
B
B
B
B
B
B
B
BT
HE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
HE
E
E
E
E
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
U
B
BU
BU
BU
B
B
IL
I
IL
I
IL
IL
I
IL
IL
IL
IL
I
IL
DE
DE
E
R.
R.
R.
R.
R.
R.
R.
R.
R.
R.R.
R
R.
R
R
R
R
R
R
COCOCOCO
COCO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
C
C
O
CO
CO
CO
O
C
C
C
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
WWW.BOBTHEBUILDER.COM fisher-price.com
Keep these instructions for future reference as they contain important information.
SWITCH & FIX BOB
SYMPTOM SOLUTION
Tool does not attach to belt
Tool does not attach to Bob’s tool hand
Tool does not t into Bob’s free hand
The tools are made to fit in only one specific orientation. Make sure the belt is clicked into place and
that the tool is properly aligned with the tool loop on the belt.
Rotate the belt so the belt loop clicks into place. You will know when the tool loops are aligned
properly when they click into place.
The tools are made to fit in only one specific orientation. Make sure the tool is properly aligned with
the opening in Bob’s hand.
x 1
x 1
x 1
x 1
x 1
Each tool can fit in Bob’s
free hand. Ensure the tool
is aligned properly.
Welding mask is
adjustable.
Attach the welding mask to
Bob’s helmet (mask is removable).
Align each tool with a belt loop
and slide into place.
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
Rotate Bob’s belt to select a tool (belt rotates in
either direction).
Press the tool to a surface for lights & sounds.
Press down on Bob’s helmet so his arm lowers and the
selected tool clicks into place, then release.
To unload, ensure the empty spot on Bob’s tool
belt is selected. Press down on Bob’s helmet so
it detaches, then release.
12
34
When selecting a tool, rotate the belt so the tool loop clicks into place.
The 3 tools are made to fit in the tool loops (and Bob’s free hand) in one specific orientation. When manually attaching
tools, align the tool properly and slide into place.
Sheet Size Open: 8.3” x 11.7” (A4)
Sheet Size Folded: 5.8” x 8.3” (A5)
IS Size - Format 2
11.7”
8.3”
front back
Back
4
Cover
1
23
folded
23
Cover
1
23Back
4
Item No : DTP37-0970-1101365794-IS
Version : DOM
Paper : 70 gsm woodfree paper
Color : Black
Date : 08/04/16

BATTERY INSTALLATION:
Unscrew and lift away cover from back of helmet.
Replace batteries as indicated inside the battery
compartment. Batteries included are for demonstration
purposes only. For longer life use only alkaline batteries.
If the product begins to malfunction, check the battery
installation. You may need to reset the electronics by
removing the batteries and reinstalling them. If the
product continues to malfunction or no longer operates,
remove the batteries from the toy and replace them with
fresh batteries. Requires 3 "AG13" (LR44) batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak uids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
REQUIRED TOOL:
PHILLIPS SCREWDRIVER
(NOT INCLUDED).
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
1,5V x 3
“AG13” (LR44)
©2016 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of
Mattel, except as noted. PRINTED IN CHINA.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China. Tel.: [phone].
©2016 HIT Entertainment Limited and Keith Chapman.
The Bob the Builder name and character, related characters
and logo are trademarks of HIT Entertainment Limited.
©2016 HIT Entertainment Limited.
HIT and the HIT logo are trademarks of HIT Entertainment Limited.
DTP37
DTP37-0970
11013 6579 4 - DO M
11
0
1
365
794-D
OM
For videos, activities and more, visit:
WW
W
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
WW
W
W
WW
W
W
W
W
W
W
W.
W.
W
W.
W.W.
W.
W.
W.
W.
W.
W.
W.
W.
W.
.
.
BO
BO
BO
BO
BO
BO
BO
BO
BO
BO
O
BO
BO
BO
BO
BO
BO
O
BO
BO
BO
BO
BO
O
BO
B
B
B
B
B
B
B
B
B
B
BT
B
B
B
B
B
B
B
BT
HE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
HE
E
E
E
E
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
BU
U
B
BU
BU
BU
B
B
IL
I
IL
I
IL
IL
I
IL
IL
IL
IL
I
IL
DE
DE
E
R.
R.
R.
R.
R.
R.
R.
R.
R.
R.
R.
R
R.
R
R
R
R
R
R
COCO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
CO
C
C
O
CO
CO
CO
O
C
C
C
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
WWW.BOBTHEBUILDER.COM fisher-price.com
Keep these instructions for future reference as they contain important information.
SWITCH & FIX BOB
SYMPTOM SOLUTION
Tool does not attach to belt
Tool does not attach to Bob’s tool hand
Tool does not t into Bob’s free hand
The tools are made to fit in only one specific orientation. Make sure the belt is clicked into place and
that the tool is properly aligned with the tool loop on the belt.
Rotate the belt so the belt loop clicks into place. You will know when the tool loops are aligned
properly when they click into place.
The tools are made to fit in only one specific orientation. Make sure the tool is properly aligned with
the opening in Bob’s hand.
x 1
x 1
x 1
x 1
x 1
Each tool can fit in Bob’s
free hand. Ensure the tool
is aligned properly.
Welding mask is
adjustable.
Attach the welding mask to
Bob’s helmet (mask is removable).
Align each tool with a belt loop
and slide into place.
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
LIGHTS & PHRASES WHEN
HELMET IS PRESSED
Rotate Bob’s belt to select a tool (belt rotates in
either direction).
Press the tool to a surface for lights & sounds.
Press down on Bob’s helmet so his arm lowers and the
selected tool clicks into place, then release.
To unload, ensure the empty spot on Bob’s tool
belt is selected. Press down on Bob’s helmet so
it detaches, then release.
12
34
When selecting a tool, rotate the belt so the tool loop clicks into place.
The 3 tools are made to fit in the tool loops (and Bob’s free hand) in one specific orientation. When manually attaching
tools, align the tool properly and slide into place.
Sheet Size Open: 8.3” x 11.7” (A4)
Sheet Size Folded: 5.8” x 8.3” (A5)
IS Size - Format 2
11.7”
8.3”
front back
Back
4
Cover
1
23
folded
23
Cover
1
23Back
4
Item No : DTP37-0970-1101365794-IS
Version : DOM
Paper : 70 gsm woodfree paper
Color : Black
Date : 08/04/16