Fitbit Zip FB301 User manual

User Manual
Version 1.3

Table of Contents
Get started 4
What's in the box 4
Insert the battery 4
Set up with your phone 5
See your data in the Fitbit app 6
Wear Zip 7
Clip Placement 7
Basics 8
Navigate Zip 8
Check battery level 8
Care for Zip 8
Activity Tracking 9
See your stats 9
Update Zip 10
Troubleshooting 11
Return policy and warranty 12
Regulatory & Safety Notices 13
USA:Federal Communications Commission(FCC) statement 13
Canada:Industry Canada (IC)statement 14
European Union (EU) 14
Australia 15
China 16
Wireless sync dongle 16
Zip 17
Israel 17
Mexico 17
Serbia 18
Singapore 18
2

South Africa 18
South Korea 19
United Arab Emirates 19
Safety Statement 20
Important safety information 20
Battery precautions 20
Disposal and recycling information 21
3

Get started
Welcome to the Fitbit Zip Wireless Activity Tracker. Take a moment to review our
complete safety information at fitbit.com/safety.
What's in the box
Your Zip box includes:
Tracker Clip Battery door
tool
Wireless sync
dongle
3V coin battery,
CR2025
Insert the battery
1. Remove your Zip from its packaging and then use the battery door tool to
unlock the battery door. Insert the tool into the slot on the back of the unit,
and turn the door counterclockwise to remove it.
2. Once the door has been removed, insert the provided battery into the back of
the unit, with the “+” sign facing up. The battery will rest in the center of the
compartment.
3. Once the battery is in place, align the arrow on the battery door with the
‘unlock’ icon on your Zip to put the battery door in place. Use the battery door
tool to ‘lock’ the battery door by turning it clockwise until the arrow on the
4

door lines up with the ‘lock’ icon.
4. Once the display comes on, you will be ready to proceed with setup. The
device version of your Zip will appear on the display, followed by a series of
smiley faces, which are used to represent your activity level. The display will
remain on for 30 minutes after inserting the battery.
5. Take the wireless sync dongle from the box and plug it into a USB port on
your computer.
6. You are now ready to get started with setup.
Set up with your phone
Set up Zip with the Fitbit app for iPhones and iPads or Android phones. The Fitbit
app is compatible with most popular phones and tablets. For more information, see
fitbit.com/devices.
To get started:
1. Download the Fitbit app:
lApple App Store for iPhones
lGoogle Play Store for Android phones
5

2. Install the app, and open it.
lIf you already have a Fitbit account, log in to your account > tap the
Today tab > your profile picture > Set Up a Device.
lIf you don't have a Fitbit account, tap Join Fitbit to be guided through a
series of questions to create a Fitbit account.
3. Continue to follow the on-screen instructions to connect Zip to your account.
When you're done with setup, read through the guide to learn more about your new
tracker and then explore the Fitbit app.
For more information, see help.fitbit.com.
See your data in the Fitbit app
Open the Fitbit app on your phone to view your activity and sleep data, log food
and water, participate in challenges, and more.
6

Wear Zip
Learn how to best wear your tracker.
Clip Placement
Wear Zip on or close to your body with the screen facing outward. Secure the clip
tightly to a shirt pocket, bra, pants pocket, belt, or waistband. Try out a few
different locations to see what's most comfortable and secure for you.
If you experience skin irritation when wearing Zip on your bra or waistband, clip it to
an external piece of clothing instead, such as your belt or pocket.
7

Basics
Learn how best to navigate, check the battery level, and care for your tracker.
Navigate Zip
Tap Zip to scroll through your stats. To conserve battery, the tracker's screen turns
off after 20 seconds if no steps are recorded. The display remains off until it's
moved.
Check battery level
From the Today tab in the Fitbit app, tap your profile picture. The battery icon
next to Zip shows the tracker's current battery level.
Care for Zip
It's important to clean and dry Zip regularly. For more information, see
fitbit.com/productcare.
8

Activity Tracking
Zip continuously tracks a variety of stats whenever you wear it. Data automatically
syncs when in range of the Fitbit app throughout the day.
See your stats
Tap your Zip to see your daily stats:
lSteps taken
lDistance covered
lCalories burned
9

Update Zip
Update your tracker to get the latest feature enhancements and product updates.
When an update is available, a notification appears in the Fitbit app. After you start
the update, a progress bar appears on Zip and in the Fitbit app until the update is
complete. Keep your tracker and phone close to each other during the update.
For more information, see help.fitbit.com.
10

Troubleshooting
If you experience any of the following issues, restart your tracker:
lWon't sync
lWon't track steps or other data
lWon't respond to taps
To restart your tracker:
1. Open the battery door using the battery door tool and remove the battery.
2. Wait 10 seconds.
3. Place the battery back into the tracker with the “+” side facing up, and close
the door.
For more information or to contact Customer Support, see help.fitbit.com.
11

Return policy and warranty
Find warranty information and the fitbit.com return policy at
fitbit.com/legal/returns-and-warranty.
12

Regulatory & Safety Notices
Model Name: FB301
USA:Federal Communications Commission(FCC)
statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
lReorient or relocate the receiving antenna.
lIncrease the separation between the equipment and receiver.
lConnect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
lConsult the dealer or an experienced radio/TV technician for help.
13

This device meets the FCC and IC requirements for RF exposure in public or
uncontrolled environments.
FCCID:XRAFB301
Canada:Industry Canada (IC)statement
IC Notice to Users English/French in accordance with current issue of RSS GEN:
This device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence
(s). Son utilisation est soumise à Les deux conditions suivantes:
1. Cet appareil ne peut pas provoquer d’interférences et
2. Cet appareil doit accepter Toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement du dispositif
CAN ICES-3 (B)/NMB-3(B)
IC ID: 8542A-FB301
European Union (EU)
Simplified EU Declaration of Conformity
Hereby, Fitbit, Inc. declares that the radio equipment type Model FB301 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.fitbit.com/safety
Vereinfachte EU-Konformitätserklärung
14

Fitbit, Inc. erklärt hiermit, dass die Funkgerättypen Modell FB301 die Richtlinie
2014/53/EU erfüllen. Der vollständige Wortlaut der EU-Konformitätserklärungen
kann unter folgender Internetadresse abgerufen werden: www.fitbit.com/safety
Declaración UE de Conformidad simplificada
Por la presente, Fitbit, Inc. declara que el tipo de dispositivo de radio Modelo FB301
cumple con la Directiva 2014/53/UE. El texto completo de la declaración de
conformidad de la UE está disponible en la siguiente dirección de Internet:
www.fitbit.com/safety
Déclaration UE de conformité simplifiée
Fitbit, Inc. déclare par la présente que les modèles d’appareils radio FB301 sont
conformes à la Directive2014/53/UE. Les déclarations UE de conformité sont
disponibles dans leur intégralité sur le site suivant: www.fitbit.com/safety
Dichiarazione di conformità UE semplificata
Fitbit, Inc. dichiara che il tipo di apparecchiatura radio Modello FB301 è conforme
alla Direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è
disponibile al seguente indirizzo Internet: www.fitbit.com/safety
Australia
15

China
Wireless sync dongle
部件名称 有毒和危险品 Don
Dongle Model
FB301
铅
(Pb)
水银
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴化苯
(PBB)
多溴化二苯
醚
(PBDE)
表带和表扣 O O O O O O
电子 X O O O O O
本表格依据 SJ/T 11364 的规定编制
O = 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下
X = 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572规定的限量要
求
16

Zip
部件名称 有毒和危险品
Zip Model
FB301
铅
(Pb)
水银
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴化苯
(PBB)
多溴化二苯
醚
(PBDE)
表带和表扣 O O O O O O
电子 X O O O O O
本表格依据 SJ/T 11364 的规定编制
O = 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下
X = 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572规定的限量要
求
Israel
51-37305 המאתהרושיא
.רצ ומהלשיראלודומהקלחבינכטיונישלכעצ בלןיא
Mexico
IFETEL: RCPFIFB13-1798 (FB301B), RCPFIFB13-1798-A3 (FB301C), RCPFIFB13-1798-
A1 (FB301G), RCPFIFB13-1798-A2 (FB301M), RCPFIFB13-1798-A4 (FB301W)
17

Serbia
И005 15
Singapore
Complies
with IDA
Standards
DA107950
South Africa
TA-2013/745
APPROVED
18

South Korea
-. 사용 주파수 (Used frequency): 2402 MHz-2480 MHz
-. 채널수 (The number of channels): 40
-. 공중선전계강도 (Antenna power): 1.2 dBi
-. 변조방식 (Type of the modulation): Digital
-. 안테나 유형(Antenna Type): Vertical
-. 출력 (Output power): 1.32 mW/MHz E.I.R.P.
-. 안테나 종류 (Type of Antenna) PCB
KCCapproval information
1) Equipment name(model name):무선데이터
통신시스템용 특정소출력무선기기 FB301
2) Certificate number : MSIP-CMM-XRA-FB301
3) Applicant : Fitbit, Inc.
4) Manufacture: Fitbit, Inc.
5) Manufacture / Country of origin: P.R.C.
United Arab Emirates
TRA
REGISTERED
NO:
ER35024/14
DEALERNO:
35294/14
19

Safety Statement
This equipment has been tested to comply with safety certification in accordance
with the specifications of EN Standard: EN60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013.
Important safety information
lRead these instructions.
lKeep these instructions.
lHeed all warnings.
lFollow all instructions.
lDo not attempt to open the tracker. Substances contained in this product
and/or its battery may damage the environment and/or human health if
handled and disposed of improperly.
lDo not tamper with your Zip.
lDo not use abrasive cleaners to clean your Zip.
lDo not place your Zip in a Dishwasher, Washing Machine or Dryer.
lDo not expose your Zip to extremely high or low temperatures.
lDo not use your Zip in a sauna or steam room.
lDo not leave your Zip in direct sunlight for an extended period of time.
lDo not leave your Zip near open flames.
lDo not dispose of your Zip in a fire. The battery could explode.
lDo not attempt to disassemble your Zip, it does not contain serviceable
components.
lNever allow children to play with the Zip; the small components may be a
choking hazard!
Battery precautions
Change the battery in accordance with the instructions supplied with this guide.
20