Flamerite Fires E-FX 1000 User manual

LOG INSTRUCTIONS

3
ELECTRIC FIRES MADE IN EUROPE
WARNING: DC SUPPLY 12V
• IMPORTANT: Each log must be wired in the correct order
and direction or a failure will occur. Disconnect the re
from the mains power supply until installation is complete.
2 ELECTRIC FIRES MADE IN EUROPE
IMPORTANT
IMPORTANT
All E-FX Lite Fires come with
the log set pre installed, but
replacement part numbers are
available for any parts needed.
CONTENTS
What’s in the box.......................................................................................................................................................... 4
E-FX Log Instructions................................................................................................................................................... 6
E-FX Log Layouts......................................................................................................................................................... 12
E-FX - SL Log Layouts ................................................................................................................................................ 13
Spares & Repairs Codes .......................................................................................................................................... 14

4 ELECTRIC FIRES MADE IN EUROPE 5
ELECTRIC FIRES MADE IN EUROPE
BOX CONTENTS
E-GLO LOGS BLACK GLASS
GREY CHIPSCLEAR GLASS
TOUCH-UP PAINT VERMICULITE
E-FX LOG INSTRUCTIONS
IMPORTANT
Each log must be wired in the correct order and direction or a failure will occur. Refer to
the instructions before undertaking installation of the logs. Disconnect the re from the
mains power supply until installation is complete.
01 - PLACE THE LOGS
Starting at the right hand side, place the logs in the positions shown printed on the fuel bed. The
logs have numbers on that tell you where to put them. See Page 12 for the layout for your re.
02 - CONNECT THE LOGS
Starting at the right hand side again, plug
Log 1 into the connector marked A on the
fuel bed.
IMPORTANT
Make sure that the connectors are
tted securely and fully engaged.
Poor connections lead to faults.

6 ELECTRIC FIRES MADE IN EUROPE 7
ELECTRIC FIRES MADE IN EUROPE
E-FX LOG INSTRUCTIONS
03 - CONNECT THE LOGS
Connect the logs together using the wires. You can only plug them in one way. Work your way
from right to left, making sure all connections are tight and secure.
E-FX LOG INSTRUCTIONS
04 - CONNECT THE FUEL BED
Connect the far left log to connector B. This completes the log wiring.

8 ELECTRIC FIRES MADE IN EUROPE 9
ELECTRIC FIRES MADE IN EUROPE
E-FX LOG INSTRUCTIONS
05 - HIDE THE CONNECTORS
Now everything is connected, make sure all the wires are hidden behind or underneath the logs,
making sure you can not see them.
E-FX LOG INSTRUCTIONS
07 - ADD THE DARK EMBERS
To make your re look even more realistic, place the black glass on top of the clear glass. Use
about 25% black glass to 75% clear glass so you still get lots of light from your fuel bed.
06 - ADD THE LIGHT EMBERS
Printed on the fuel bed are outlines showing where the dierent types of aggregate go. Starting
with the clear glass, place the crushed glass onto the fuel bed.

10 ELECTRIC FIRES MADE IN EUROPE 11
ELECTRIC FIRES MADE IN EUROPE
E-FX LOG INSTRUCTIONS E-FX LOG INSTRUCTIONS
08 - ADD THE ASHES
Using the bag called vermiculite, sprinkle the ashes over the fuel bed where there is empty space.
Make sure any free space is covered by the ashes.
09 - THE FINISHING TOUCH
Finally, using the bag labelled grey chips, scatter the chips across the fuel bed, so that it creates
the eect of burnt wood, putting the final touch on your fuel bed.

12 ELECTRIC FIRES MADE IN EUROPE 13
ELECTRIC FIRES MADE IN EUROPE
E-FX LOG LAYOUTS E-FX SL LOG LAYOUTS
E-FX 1000
E-FX 1300
E-FX 1500
E-FX 1800
E-FX SL 600
E-FX SL 1000
E-FX SL 750
E-FX 450

14 ELECTRIC FIRES MADE IN EUROPE 15
ELECTRIC FIRES MADE IN EUROPE
PART CODES
PART NAME PART CODE
E-FX Log 1 FE191
E-FX Log 2 FE192
E-FX Log 3 FE193
E-FX Log 4 FE194
E-FX Log 5 FE195
E-FX Log 6 FE196
E-FX Log 7 FE197
E-FX Log 8 FE198
E-FX Log 9 FE199
E-FX Log 10 FE200
Touch Up paint FE215
Clear Glass FE216
Black Glass FE218
Vermiculite FE213
Grey Chips FE214
E-FX SL - Log 1 FE201
E-FX SL - Log 2 FE202
E-FX SL - Log 3 FE203
E-FX SL - Log 4 FE204
E-FX SL - Log 5 FE205
E-FX SL - Log 6 FE206
E-FX - Log 7 FE207
NOTES

www.ameritefires.com/efx
Flamerite Fires Ltd, Greenhough Road, Licheld, Staffordshire WS13 7AU
Tel: [phone] | Fax: [phone] | Email: info@ameritefires.com
These products are only suitable for well insulated spaces or occasional use.
Manufactured in the United Kingdom. All products are protected by patents, registered
design and intellectual property rights. Flamerite Fires Ltd. will protect these rights.
All specications are correct at the time of publishing but are subject to change.