FLIR ONE Series User manual
User’s manual
FLIR ONE series
User’s manual
FLIR ONE series
#T810375; r. AA/51295/51327; en-US iii
Table of contents
1 Disclaimers ........................................................................................1
1.1 Legal disclaimer ......................................................................... 1
1.2 Usage statistics .......................................................................... 1
1.3 Changes to registry .....................................................................1
1.4 U.S. Government Regulations........................................................ 1
1.5 Copyright ..................................................................................1
1.6 Quality assurance ....................................................................... 1
1.7 Patents.....................................................................................1
1.8 EULA Terms ..............................................................................1
1.9 EULA Terms ..............................................................................2
2 Safety information ...............................................................................3
3 Notice to user .....................................................................................4
3.1 User-to-user forums .................................................................... 4
3.2 Disposal of electronic waste .......................................................... 4
3.3 Training ....................................................................................4
3.4 Documentation updates ............................................................... 4
3.5 Important note about this manual.................................................... 4
3.6 Note about authoritative versions.................................................... 5
4 Customer help ....................................................................................6
4.1 General ....................................................................................6
4.2 Submitting a question .................................................................. 6
4.3 Downloads................................................................................6
5 Quick Start Guide ................................................................................8
5.1 Procedure .................................................................................8
6 Description.........................................................................................9
6.1 View from the front ...................................................................... 9
6.2 View from the bottom ................................................................... 9
6.3 The FLIR ONE App .....................................................................9
6.3.1 Installation ......................................................................9
6.3.2 The FLIR Cloud account .................................................. 10
6.3.3 Bars and views .............................................................. 10
6.3.4 Imaging Control ............................................................. 10
7 Operation .........................................................................................12
7.1 Charging the battery .................................................................. 12
7.2 Turning the FLIR ONE camera on and off ....................................... 12
7.3 Connecting the FLIR ONE camera to your phone ............................. 12
7.4 Saving an image....................................................................... 12
7.4.1 General........................................................................ 12
7.4.2 Procedure .................................................................... 13
7.5 Recording a video ..................................................................... 13
7.5.1 General........................................................................ 13
7.5.2 Procedure .................................................................... 13
7.6 Recording a time-lapse video ...................................................... 13
7.6.1 General........................................................................ 13
7.6.2 Procedure .................................................................... 13
7.7 My Gallery............................................................................... 13
7.7.1 General........................................................................ 13
7.8 Palettes .................................................................................. 14
7.8.1 General........................................................................ 14
7.8.2 Change settings............................................................. 14
#T810375; r. AA/51295/51327; en-US v
Table of contents
7.9 MSX Distance.......................................................................... 14
7.9.1 General........................................................................ 14
7.9.2 Change settings............................................................. 14
7.10 Temperature Range................................................................... 14
7.10.1 General........................................................................ 14
7.10.2 Change settings............................................................. 14
7.11 IR Scale.................................................................................. 14
7.11.1 General........................................................................ 14
7.11.2 Change settings............................................................. 15
7.12 Lock Span............................................................................... 15
7.12.1 General........................................................................ 15
7.12.2 Change settings............................................................. 15
7.13 Selfie Mode ............................................................................. 15
7.13.1 Change settings............................................................. 15
7.14 Measuring ............................................................................... 15
7.14.1 General........................................................................ 15
7.14.2 Add a spot meter or an area of interest................................ 15
7.15 Torch...................................................................................... 16
7.15.1 General........................................................................ 16
7.15.2 Use the torch................................................................. 16
7.16 Self-timer ................................................................................ 16
7.16.1 General........................................................................ 16
7.16.2 Use the self-timer ........................................................... 16
7.17 Automatic calibration ................................................................. 16
7.17.1 General........................................................................ 16
7.18 Settings .................................................................................. 16
7.18.1 Location....................................................................... 16
7.18.2 Photos......................................................................... 17
7.18.3 Automatic Calibration ...................................................... 17
7.18.4 Temperature Unit ........................................................... 17
7.18.5 Emissivity ..................................................................... 17
7.19 Help....................................................................................... 17
7.20 About..................................................................................... 17
8 Cleaning the camera .......................................................................... 18
8.1 Camera housing, cables, and other items....................................... 18
8.1.1 Liquids......................................................................... 18
8.1.2 Equipment .................................................................... 18
8.1.3 Procedure .................................................................... 18
8.2 Infrared lens ............................................................................ 18
8.2.1 Liquids......................................................................... 18
8.2.2 Equipment .................................................................... 18
8.2.3 Procedure .................................................................... 18
9 CE Declaration of conformity .............................................................. 19
#T810375; r. AA/51295/51327; en-US vi
Disclaimers
1
1.1 Legal disclaimer
All products manufactured by FLIR Systems are warranted against defective
materials and workmanship for a period of one (1) year from the delivery date
of the original purchase, provided such products have been under normal stor-
age, use and service, and in accordance with FLIR Systems instruction.
Uncooled handheld infrared cameras manufactured by FLIR Systems are war-
ranted against defective materials and workmanship for a period of two (2)
years from the delivery date of the original purchase, provided such products
have been under normal storage, use and service, and in accordance with
FLIR Systems instruction, and provided that the camera has been registered
within 60 days of original purchase.
Detectors for uncooled handheld infrared cameras manufactured by FLIR Sys-
tems are warranted against defective materials and workmanship for a period
of ten (10) years from the delivery date of the original purchase, provided such
products have been under normal storage, use and service, and in accordance
with FLIR Systems instruction, and provided that the camera has been regis-
tered within 60 days of original purchase.
Products which are not manufactured by FLIR Systems but included in sys-
tems delivered by FLIR Systems to the original purchaser, carry the warranty, if
any, of the particular supplier only. FLIR Systems has no responsibility whatso-
ever for such products.
The warranty extends only to the original purchaser and is not transferable. It
is not applicable to any product which has been subjected to misuse, neglect,
accident or abnormal conditions of operation. Expendable parts are excluded
from the warranty.
In the case of a defect in a product covered by this warranty the product must
not be further used in order to prevent additional damage. The purchaser shall
promptly report any defect to FLIR Systems or this warranty will not apply.
FLIR Systems will, at its option, repair or replace any such defective product
free of charge if, upon inspection, it proves to be defective in material or work-
manship and provided that it is returned to FLIR Systems within the said one-
year period.
FLIR Systems has no other obligation or liability for defects than those set forth
above.
No other warranty is expressed or implied. FLIR Systems specifically disclaims
the implied warranties of merchantability and fitness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or
consequential loss or damage, whether based on contract, tort or any other le-
gal theory.
This warranty shall be governed by Swedish law.
Any dispute, controversy or claim arising out of or in connection with this war-
ranty, shall be finally settled by arbitration in accordance with the Rules of the
Arbitration Institute of the Stockholm Chamber of Commerce. The place of ar-
bitration shall be Stockholm. The language to be used in the arbitral proceed-
ings shall be English.
1.2 Usage statistics
FLIR Systems reserves the right to gather anonymous usage statistics to help
maintain and improve the quality of our software and services.
1.3 Changes to registry
The registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Control\Lsa\LmCompatibilityLevel will be automatically changed to level 2 if
the FLIR Camera Monitor service detects a FLIR camera connected to the
computer with a USB cable. The modification will only be executed if the cam-
era device implements a remote network service that supports network logons.
1.4 U.S. Government Regulations
This product may be subject to U.S. Export Regulations. Please send any in-
1.5 Copyright
© 2018, FLIR Systems, Inc. All rights reserved worldwide. No parts of the soft-
ware including source code may be reproduced, transmitted, transcribed or
translated into any language or computer language in any form or by any
means, electronic, magnetic, optical, manual or otherwise, without the prior
written permission of FLIR Systems.
The documentation must not, in whole or part, be copied, photocopied, repro-
duced, translated or transmitted to any electronic medium or machine read-
able form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered
trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other
trademarks, trade names or company names referenced herein are used for
identification only and are the property of their respective owners.
1.6 Quality assurance
The Quality Management System under which these products are developed
and manufactured has been certified in accordance with the ISO 9001
standard.
FLIR Systems is committed to a policy of continuous development; therefore
we reserve the right to make changes and improvements on any of the prod-
ucts without prior notice.
1.7 Patents
000439161; 000653423; 000726344; 000859020; 001707738; 001707746;
001707787; 001776519; 001954074; 002021543; 002021543-0002;
002058180; 002249953; 002531178; 002816785; 002816793; 011200326;
014347553; 057692; 061609; 07002405; 100414275; 101796816;
101796817; 101796818; 102334141; 1062100; 11063060001; 11517895;
1226865; 12300216; 12300224; 1285345; 1299699; 1325808; 1336775;
1391114; 1402918; 1404291; 1411581; 1415075; 1421497; 1458284;
1678485; 1732314; 17399650; 1880950; 1886650; 2007301511414;
2007303395047; 2008301285812; 2009301900619; 20100060357;
2010301761271; 2010301761303; 2010301761572; 2010305959313;
2011304423549; 2012304717443; 2012306207318; 2013302676195;
2015202354035; 2015304259171; 204465713; 204967995; 2106017;
2107799; 2115696; 2172004; 2315433; 2381417; 2794760001; 3006596;
3006597; 303330211; 4358936; 483782; 484155; 4889913; 4937897;
4995790001; 5177595; 540838; 579475; 584755; 599392; 60122153;
6020040116815; 602006006500.0; 6020080347796; 6020110003453;
615113; 615116; 664580; 664581; 665004; 665440; 67023029; 6707044;
677298; 68657; 69036179; 70022216; 70028915; 70028923; 70057990;
7034300; 710424; 7110035; 7154093; 7157705; 718801; 723605; 7237946;
7312822; 7332716; 7336823; 734803; 7544944; 7606484; 7634157;
7667198; 7809258; 7826736; 8018649; 8153971; 8212210; 8289372;
8340414; 8354639; 8384783; 8520970; 8565547; 8595689; 8599262;
8654239; 8680468; 8803093; 8823803; 8853631; 8933403; 9171361;
9191583; 9279728; 9280812; 9338352; 9423940; 9471970; 9595087;
D549758.
1.8 EULA Terms
• You have acquired a device (“INFRARED CAMERA”) that includes soft-
ware licensed by FLIR Systems AB from Microsoft Licensing, GP or its af-
filiates (“MS”). Those installed software products of MS origin, as well as
associated media, printed materials, and “online” or electronic documen-
tation (“SOFTWARE”) are protected by international intellectual property
laws and treaties. The SOFTWARE is licensed, not sold. All rights
reserved.
• IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT
(“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. IN-
STEAD, PROMPTLY CONTACT FLIR Systems AB FOR INSTRUCTIONS
ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE
OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON
THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EU-
LA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
•GRANT OF SOFTWARE LICENSE. This EULA grants you the following
license:
◦ You may use the SOFTWARE only on the DEVICE.
◦NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLER-
ANT. FLIR Systems AB HAS INDEPENDENTLY DETERMINED
HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS
RELIED UPON FLIR Systems AB TO CONDUCT SUFFICIENT
TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE
FOR SUCH USE.
◦NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is
provided “AS IS” and with all faults. THE ENTIRE RISK AS TO SAT-
ISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EF-
FORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO,
THERE IS NO WARRANTY AGAINST INTERFERENCE WITH
YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST IN-
FRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES RE-
GARDING THE DEVICE OR THE SOFTWARE, THOSE
WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT
BINDING ON, MS.
◦ No Liability for Certain Damages. EXCEPT AS PROHIBITED BY
LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPE-
CIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING
FROM OR IN CONNECTION WITH THE USE OR PERFORM-
ANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY
EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN
NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EX-
CESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).
◦Limitations on Reverse Engineering, Decompilation, and Dis-
assembly. You may not reverse engineer, decompile, or disassem-
ble the SOFTWARE, except and only to the extent that such activity
is expressly permitted by applicable law notwithstanding this
limitation.
◦SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.
You may permanently transfer rights under this EULA only as part of
a permanent sale or transfer of the Device, and only if the recipient
agrees to this EULA. If the SOFTWARE is an upgrade, any transfer
must also include all prior versions of the SOFTWARE.
◦EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is
subject to U.S. export jurisdiction. You agree to comply with all appli-
cable international and national laws that apply to the SOFTWARE,
including the U.S. Export Administration Regulations, as well as
end-user, end-use and destination restrictions issued by U.S. and
other governments. For additional information see http://www.micro-
soft.com/exporting/.
#T810375; r. AA/51295/51327; en-US 1
Disclaimers1
1.9 EULA Terms
Qt4 Core and Qt4 GUI, Copyright ©2013 Nokia Corporation and FLIR Sys-
tems AB. This Qt library is a free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at your op-
tion) any later version. This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License, http://www.gnu.org/licenses/lgpl-2.1.html. The
source code for the libraries Qt4 Core and Qt4 GUI may be requested from
FLIR Systems AB.
#T810375; r. AA/51295/51327; en-US 2
Notice to user
3
3.1 User-to-user forums
Exchange ideas, problems, and infrared solutions with fellow thermographers around the
world in our user-to-user forums. To go to the forums, visit:
http://forum.infraredtraining.com/
3.2 Disposal of electronic waste
Electrical and electronic equipment (EEE) contains materials, components and substan-
ces that may be hazardous and present a risk to human health and the environment when
waste electrical and electronic equipment (WEEE) is not handled correctly.
Equipment marked with the below crossed-out wheeled bin is electrical and electronic
equipment. The crossed-out wheeled bin symbol indicates that waste electrical and elec-
tronic equipment should not be discarded together with unseparated household waste,
but must be collected separately.
For this purpose all local authorities have established collection schemes under which res-
idents can dispose waste electrical and electronic equipment at a recycling centre or other
collection points, or WEEE will be collected directly from households. More detailed infor-
mation is available from the technical administration of the relevant local authority.
3.3 Training
To read about infrared training, visit:
• http://www.infraredtraining.com
• http://www.irtraining.com
• http://www.irtraining.eu
3.4 Documentation updates
Our manuals are updated several times per year, and we also issue product-critical notifi-
cations of changes on a regular basis.
To access the latest manuals, translations of manuals, and notifications, go to the Down-
load tab at:
http://support.flir.com
It only takes a few minutes to register online. In the download area you will also find the lat-
est releases of manuals for our other products, as well as manuals for our historical and
obsolete products.
3.5 Important note about this manual
FLIR Systems issues generic manuals that cover several cameras within a model line.
This means that this manual may contain descriptions and explanations that do not apply
to your particular camera model.
#T810375; r. AA/51295/51327; en-US 4
Customer help
4
4.1 General
For customer help, visit:
http://support.flir.com
4.2 Submitting a question
To submit a question to the customer help team, you must be a registered user. It only
takes a few minutes to register online. If you only want to search the knowledgebase for
existing questions and answers, you do not need to be a registered user.
When you want to submit a question, make sure that you have the following information to
hand:
• The camera model
• The camera serial number
• The communication protocol, or method, between the camera and your device (for ex-
ample, SD card reader, HDMI, Ethernet, USB, or FireWire)
• Device type (PC/Mac/iPhone/iPad/Android device, etc.)
• Version of any programs from FLIR Systems
• Full name, publication number, and revision number of the manual
4.3 Downloads
On the customer help site you can also download the following, when applicable for the
product:
#T810375; r. AA/51295/51327; en-US 6
Customer help
4
• Firmware updates for your infrared camera.
• Program updates for your PC/Mac software.
• Freeware and evaluation versions of PC/Mac software.
• User documentation for current, obsolete, and historical products.
• Mechanical drawings (in *.dxf and *.pdf format).
• Cad data models (in *.stp format).
• Application stories.
• Technical datasheets.
• Product catalogs.
#T810375; r. AA/51295/51327; en-US 7
Quick Start Guide
5
5.1 Procedure
Follow this procedure:
1. Charge the FLIR ONE camera for approximately 1 hour.
2. Download and install the FLIR ONE app on your phone. The app is available on the
Apple App Store and Google Play Store.
3. Push the On/off button on the bottom of the FLIR ONE camera to turn it on. The indica-
tor will flash green when the FLIR ONE camera is ready.
4. Connect the FLIR ONE camera to your phone. If needed, adjust the blue dial of the
OneFit and extend the connector to the appropriate length to fit your phone’s protective
case.
5. Start the FLIR ONE app on your phone. You will be asked to create a user account with
your e-mail address and a password.
6. At the bottom of the screen and on the black bar, swipe to select Photo mode.
7. At the bottom of the screen, tap the round white button to take a snapshot. The image
is saved to the Gallery.
8. The camera automatically goes into sleep mode after 2 minutes of inactivity.
9. Push and hold the On/off button for more than 2 seconds to turn off the FLIR ONE
camera.
#T810375; r. AA/51295/51327; en-US 8
Description
6
6.1 View from the front
1. Visual camera.
2. Thermal camera.
3. Phone connect.
4. OneFit height control.
6.2 View from the bottom
1. On/off switch and Power indicator.
2. Charge indicator LED.
3. USB-C power connector.
6.3 The FLIR ONE App
6.3.1 Installation
The latest version of the FLIR ONE app is available on the Apple App Store for iOS devi-
ces and the Google Play Store for Android devices. Download and install the app on your
device.
#T810375; r. AA/51295/51327; en-US 9
Description6
6.3.2 The FLIR Cloud account
The first time you start the FLIR ONE app, you will be asked to create a user account with
your e-mail address and a password. A wizard will start that guides you through the
registration.
The account can also be created at a later stage through the Control Panel. Follow this
procedure:
1. In the top bar, tap the Control Panel icon.
2. Tap Create your FLIR Cloud account.
3. Type the information needed for the account, and then tap CREATE.
4. Follow the displayed instructions, and then tap SIGN IN.
5. Tap FINISH.
6.3.3 Bars and views
• Top bar
At the top of the screen there is a black bar with icons for the Control Panel (slide-out
menu), Spot Meter, Torch, Self-timer, and Calibration, and a battery indicator for the
FLIR ONE camera.
• Live image view
In the center of the screen the Live image view is shown. Depending on the Imaging
Control settings, the presented image is either from the visual camera or the infrared
camera, or is a combination of them both, a so-called MSX image.
• Bottom bar
At the bottom of the screen there is a black bar with icons for the FLIR ONE Gallery, Im-
age Mode (Photo, Video, or Time-Lapse), and Imaging Control.
6.3.4 Imaging Control
The following settings are available in the Imaging Control:
#T810375; r. AA/51295/51327; en-US 10
Operation
7
7.1 Charging the battery
WARNING
Make sure that you install the socket-outlet near the equipment and that it is easy to get access to.
Follow this procedure:
• Connect a power supply to a wall outlet.
• Connect the power supply to the USB-C connector power on the FLIR ONE camera.
• Let the battery charge for approximately 1 hour.
• Do not use the FLIR ONE camera when the battery is charging.
7.2 Turning the FLIR ONE camera on and off
• Push the On/off button on the bottom of the FLIR ONE camera to turn it on.
The indicator will flash green when the FLIR ONE camera is ready.
• The camera automatically goes into sleep mode after 2 minutes of inactivity.
• Push and hold the On/off button for more than 2 seconds to turn off the FLIR ONE
camera.
7.3 Connecting the FLIR ONE camera to your phone
Download and install the FLIR ONE app on your phone, and then start it.
Turn on the FLIR ONE camera and connect it to your phone. If needed, adjust the blue dial
of the OneFit and extend the connector to the appropriate length to fit your phone’s protec-
tive case.
If the FLIR ONE camera is turned off when you connect it to your phone, the app will
prompt you to attach your FLIR ONE camera before you can view the camera features.
7.4 Saving an image
7.4.1 General
The images are saved to the FLIR ONE Gallery. To also have the images saved to the pho-
to gallery of your phone, go to Settings in the Control Panel.
It is not necessary to have the FLIR ONE camera attached to the phone to view saved
images.
#T810375; r. AA/51295/51327; en-US 12
Operation
7
7.4.2 Procedure
Follow this procedure:
1. In the bottom bar, swipe to select Photo mode.
2. To save an image, tap the white button.
3. To view the most recent saved image, tap the thumbnail image in the bottom bar to ac-
cess the FLIR ONE Gallery.
4. When viewing an image, swipe up or down on the image to reveal the underlying im-
age from the visible camera.
7.5 Recording a video
7.5.1 General
The videos are saved to the FLIR ONE Gallery.
7.5.2 Procedure
Follow this procedure:
1. In the bottom bar, swipe to select Video mode.
2. To begin a video recording, tap the red button.
3. To stop and save the video recording, tap the red button again.
4. To view the recorded video, tap the thumbnail image in the bottom bar to access the
FLIR ONE Gallery.
7.6 Recording a time-lapse video
7.6.1 General
Use the Time-Lapse mode to save images according to a specified time interval. The im-
ages are then combined into a video that is saved to the FLIR ONE Gallery.
7.6.2 Procedure
Follow this procedure:
1. In the bottom bar, swipe to select Time-Lapse mode.
2. To display the time-lapse options, tap the red button and then adjust the options as
needed.
3. To begin a video recording, tap the red button.
4. To stop and save the video recording, tap the red button again.
5. To view the recorded video, tap the thumbnail image in the bottom bar to access the
FLIR ONE Gallery.
7.7 My Gallery
7.7.1 General
To view and edit captured images and recorded videos, tap the thumbnail image in the
bottom bar to access the FLIR ONE Gallery. Images and videos may be shared through
text messaging or e-mail, and may be edited by changing the color palette or the tempera-
ture scale. While an image is being viewed, it is possible to swipe up or down to reveal the
visible image that is used for MSX blending.
#T810375; r. AA/51295/51327; en-US 13
Operation
7
7.8 Palettes
7.8.1 General
The FLIR ONE app allows a choice from nine different palettes, including color, grayscale,
or a combination of both.
7.8.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the Palettes icon.
3. Select one of the available color palettes.
7.9 MSX Distance
7.9.1 General
The FLIR ONE camera is tuned to align thermal and visual images for an object distance
of 3 m. For images taken at a shorter distance, use the MSX Distance control slider to ad-
just the alignment.
7.9.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the MSX Distance icon.
3. Use the slider bar to adjust the outlines of the visual image until they are aligned with
the edges of the thermal image.
4. To exit, tap the MSX Distance icon again.
7.10 Temperature Range
7.10.1 General
All of the cameras in the FLIR ONE series can measure temperatures between –20°C and
+120°C (–4 to +248°F).
The FLIR ONE PRO camera has an extended temperature range, and can measure up to
+400°C (+752°F). High temperature is the standard mode.
7.10.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the Temperature Range mode icon.
3. Select the Low temperature option, and then use the spot meters as you would in the
standard mode.
7.11 IR Scale
7.11.1 General
The FLIR ONE camera will show you the temperature range of the current scene, and will
readjust the range automatically when the scene changes. By using the feature IR Scale,
it is possible to manually set the temperature range and consequently permit adjustment
of the color mapping.
#T810375; r. AA/51295/51327; en-US 14
Other manuals for ONE Series
3
Table of contents
Other FLIR Thermal Camera manuals
