Fly sky Fs-gt3 User manual

FS GT3Http www flysky cn comCopy right 2008 flysky co ltd#Digital propotional radio control sytem

INSTRUCTION MANUAL

ቫ༰٫

M e n u

MODELS FS GT31

Digital propotional radio control sytem

Http www flysky cn com1.Introduction 2

2.Ser vices2

3.The special symbols3

4.Safty guides3

5.Batter y char ging notes4

6 Transmitter parameters5

7.Receiver parameters5

8.RF module parameters6

9.Receiver connectivity7

10 2 4G Operation notes9

11.Each par t of the transmitter11

Main menu13

MODEL SEL14

Edit name14

Reverse15

Subtrim15

DR16

END POINT17

ARC18

DISPLAY18

ABS19

ST DELAY20

TH SPEED21

PROG KEY21

13 EXPLODED DRWING.22

14.Packaging with content list23

12.Transmitter function notes12

MODELS FS GT32

Digital propotional radio control sytem

Http www flysky cn com1 . I n t r od u c t i o n

2 . S e r vi c e s

If you found any problems during the operation process, please refer to the manual. If

the problem still exist, you could contact our dealers to found out the way to solve. And

you could also log on to our website service center:

HTTP WWW FLYSKY CH COMThank you for choosing 2.4 G ratio remote control digital products, if you are the first time

to use this type of products, please read this statement carefully and strictly in

accordance with the requirements of operation. You could refer to the Manual if you

meet any problems during the operation . Please well keep the manual after use because

you might have to use it again next time Once again, thanks for buying our products,བᵰᙼ೼Փ⫼䖛⿟Ёথ⦄᳝䯂乬ˈ䇋ᙼ㄀ϔᯊ䯈ܜᶹⳟ䇈ᯢкǄ䯂乬བᵰ䖬ϡ㛑㾷އǄᙼৃҹ䎳៥Ӏⱘ㒣䫔ଚ㘨㋏㾷އǄᙼгৃҹⱏᔩ៥Ӏⱘ᳡ࡵЁᖗ㔥キ˖

3 . T h e s p e c i al s y m b o l s

Please pay attention to the following symbols when it appears on the manual,

carefully.

and read

Prohibition Mandatory

4 .S a ft y g u id e s

MODELS FS GT33

Digital propotional radio control sytem

Http www flysky cn com

Danger:

Warning:

Attention:

The sequence to shut down is that turn off the receiver power first, and then the

If the above operations are reverse, it might lead to uncontrolled and cause

ذℶՓ⫼ࠡ䇋ᙼܜ݇䯁᥹ᬊᴎ⬉⑤✊ৢ݇䯁থᇘᴎ⬉⑤ǄҹϞ᪡԰བᵰড৥ৃ㛑ᇍ㟈༅᥻Ң㗠ѻ⫳ᛣ໪Accident.

You need to turn the throttle channel(ch3) and inching switch to the lowest before

ᓔᴎՓ⫼ᯊ䇋ᙼ࣓ᖙܜᇚ⊍䮼䗮䘧˄˅ঞᖂ䇗㕂᳔ԢッǄ✊ৢᠧᓔথᇘᴎ⬉⑤ᑊẔᶹ⬉⑤CH3

⬉䞣ˈݡ᥹䗮᥹ᬊᴎ⬉⑤ǄYou use. Then switch on the transmitter power ,finally connect the receiver.

Before you fly, please make sure the movement of server are correspond with the

೼亲㸠ࠡ䇋ᙼࡵᖙܜẔᶹԎ᳡఼ⱘ৘乍ࡼ԰ᰃ৺Ϣᇍᑨ᪡㒉ᴚⱘᮍ৥ϔ㟈བᵰϡϔ㟈䇋䇗ᭈৢݡՓ⫼direction of joystick. If inconsistent, please adjust before fly.

Do not fly in bad weather such as rainy or thundering to assure the safety of

䇋ᙼϡ㽕೼໰ᰮˈࠂ亢៪ϟ䲼ᯊՓ⫼ˈ಴Ў䖭ḋⱘ໽⇨⦃๗Ӯᇍ䘹᥻䆒໛ѻ⫳ᑆᡄҢ㗠ᇐ㟈༅᥻㗠ѻ⫳ᛣ໪

you and others.

If the operator does not operate by following the instructions,the operator

བᵰ᪡԰㗙ϡᣝℷᐌ᪡԰ᮍ⊩᪡԰ˈৃ㛑ᇐ㟈᪡԰㗙Ϲ䞡ফӸˈ⫮㟇㟈䰽ʽmay lead to serious injuries, even Mortal danger.

If the operator does not operate by following the instructions,the operator

བᵰ᪡԰㗙ϡᣝℷᐌ᪡԰ᮍ⊩᪡԰ৃ㛑ᇐ㟈᪡԰㗙Ϲ䞡໪Ӹ䞡Ӹ៪㗙㟈ᚙމmay lead to serious injuries, even Mortal danger.

If the operator does not operate by following the instructions,the operator

བᵰ᪡԰㗙ϡᣝℷᐌ᪡԰ᮍ⊩᪡԰ৃ㛑Ӯᇐ㟈᪡԰㗙䕏ӸԚϔ㠀ϡӮᇍ᪡԰㗙䗴may lead to minor injuries, but generally it will not cause serious injuries

to the operator.

៤䞡Ӹtransmitter power.

5 . B a t te r y c h a r g i n g n o t e s

5 01Transmitter charger:

A. Install the battery to transmitter with correct direction, and cover it.

B. Connect the charger to the main connector.

C. Connect the charger to the transmitter

Connector.

D. Cut off the power supply immediately after

Recharge completed.

A. Connect the charger to the main connector.

B. Connect the Rechargeable receiver with battery charger

C. Recharge completed, cut off the power supply immediately.

MODELS FS GT34

Digital propotional radio control sytem

Http www flysky cn comIf your transmitter, receiver using a nickel-cadmium, nickel-metal hydride rechargeable battery,

you have to well-check before you fly. If lack of electricity, it could happen those phenomenon

like inadequate control or out of control, resulting accident. So please charge immediately when

຅ഠݨࠂ໠৒༯৒༓ቫݨ༡ഞ᳃ഞยݬଙیދދۀዠࠩᅞ෰หഠჃ؄ٳދۀދோ຅ދோمᐃଙംݠᎄନᎈ૒ஙمࣗ৊ፃ༁ନݨᄆᄣܙߺڄ໶ሬၖྱሞދۀދோمᐃ་ห০་یދIf you are using a nickel-cadmium, nickel-metal hydride batteries for recharging, please use our

company dedicated charger. If the electrical current is too large and it may lead to temperature

over-heated and cause fire burning accident. Please cut off the power supply immediately after

recharging. Please take out the battery from the transmitter when you are not using it within a

period, it is because the battery may damage the aircraft batteries, thus being exposed.

຅ഠ༓ቫݨ༡ഞ᳃ഞยދۀઌᅞیދหഠ༓ቫႤಏࣇྲྀݨᏈቫیދෙሼၼ຅یދދః࿁ܹଙംݠᎄދۀ႔ߊ࿁࢝ܙߺ๚໑ිৈܾୢሬၖȣیދၞڱหഠ৪་ฐߑދኺȣݕഠڌ་م༓ቫ་หഠދۀܙࠂ໠৒᎒฿۞˨ሼၼދۀଙംݠᎄࠂ໠৒ދۀඎྨ঍˨ܙߺ۫مைȣ5 02Receiver charger:ଙیދދۀւࠝᄢᏐຉࠂ໠৒˨ج໋ދۀࢅ˷یދෙٯຉ༪ދପ˷یދෙیދါٯຉࠂ໠৒یދପ˷یދၞڱ˨৪་ދኺฐߑȣیދෙٯຉ༪ދପ˷ଙیދ༯৒ቫދۀପናیދෙیދପஸ˷یދၞڱ৪་ދኺฐߑ

MODELS FS GT35

Digital propotional radio control sytem

Http www flysky cn com6 T r a ns m i t t e r p a ra m e t e r s187mm

7 . R e c ei v e r p a r a m e t er s

လݤབྷ˶ࢴလݤ˷༤৒᎘˶ڝ˨۲˷ࠂ໠ࣂఴᄯኂᄯኂ˥˷20dbm FM 0 8W

ޛᎈࠝ༗˶ˤ˥˷FM GFSK 2 4G

،ౕࠝ༗˶བྷ᏶˷བྷ૏࠶ؓఴ˶৬˷ᅛއፗ˷LCD

ݱދᆥהડࣂംቸݱኂ࡜˷བྷ૏༾۞ପቸሾ඗ପ˥˷یދପቸˤഀ󰌂ၖࡸ˥˷㧦ދኺؖᏜ˷12VDC 1 5AA 8

፟৒᎚ோ˶g

ဂᄏڌߊ˶PPG

ၖᅛۇܭPP㧦ၖࣷᇁວ˶ວ˷๭፦˷CE FCC

SpecificationsSpecificationsA channels 3 channelsB model type car boatC RF power less than 20dbm 0 8WD modulation FM GFSKE Code type digitalF sensitivity 1024G LCD type 128 64 dotH low voltage warning yes less than 9WI DSC port yes 3 5mmJ charger port yesK power 12vdc 1 5aa 8L weight 558gM ANT lenth 115 26mm 2 4gN size 187 144 288mmO color blackP certificate CE FCCMODEL FS GT3MODEL FS GR3Aလݤབྷ˶ࢴလݤ˷༤৒᎘˶ڝ˨۲˷ޛᎈࠝ༗˶˷GFSK

བྷ૏࠶ؓఴ˶৬˷፟৒᎚ோ˶5g

ဂᄏڌߊ˶PPၖᅛۇܭPP㧦ၖࣷᇁວ˶পວာಿ˷๭፦˷CE FCC

A channels 3 channelsB model type car boatD modulation GFSKE sensitivity 1024G power 4 5 6vdcH weight 5gI ANT lenth 26mmJ size 37 6 22 3 13mmK color gray semi transparentL certificate CE FCCC frequency bank 2 4GF RF receiver sensitivity 76dbm඗ఴ˶˷2 4G

༯௵಼ߊ˶˩76dbm

ދኺ˶˩࡜˷

MODELS FS GT36

Digital propotional radio control sytem

Http www flysky cn com8 . RF m o d u l e p a r a m e t e rs

1˗လݤབྷ˶ࢴလݤ2˗༤৒᎘˶ڝ˨۲4˖˗ޛᎈࠝ༗3305 1024˖˗བྷ૏࠶ؓఴ৬8 15g˖፟৒᎚ோ9 100mm˖ဂᄏڌߊ10 mmၖᅛۇܭ㧦ၖࣷᇁວ˶ວ˷12 CE FCC˗๭፦3 27 35 40MHz˖˗඗ఴ6 80dbm˖ˉ༯௵಼ߊ7 4 5 6˖ˉ˗ދኺ࡜)0࢝඗೉ହ඗ఴ˶0+]ࣂఴ˶ᄯኂ৊ݬኂ:ۇܭPP᎚ோJ༤৒᎘)67+;)6*7FM RF module

Frequency 27 35 40MHzRF power less than 0 8WSize 65 52 22mmWeight 29gModel type FS TH9X FS GT32 4G࢝඗೉ହ඗ఴ2 4G

ࣂఴᄯኂ৊ݬኂ10mW

ۇܭPP˖᎚ோ33g

༤৒᎘FS TH9X FS GT3

MODEL FS HTM01MODEL FS GR2MODEL FS TM001SpecificationsSpecificationsSpecificationsA channels 2 channelsB model type car boatD modulation PPME sensitivity 1024G power 4 5 6vdcH weight 15gI ANT lenth 26mmJ size 46 32 25mmK color blackL certificate CE FCCC frequency bank 27 35 40MHzF RF receiver sensitivity 80dbm2 4G RF moduleFrequency 2 4GRF power less than 20dbmSize 65 52 38mmWeitht 33gFor model type FS TH9X FS GT3

MODELS FS GT37

Digital propotional radio control sytem

Http www flysky cn com

Receiver༯

Servoཽ࡞ෙ

CH1

CH2

9 . R e c e i ve r c o n n e c t i v it y

SPCޛྑෙ

SWITCH

BATTERYދۀ

MOTOR౗ܵ

9 01 INSTALLATION WHEN AN MOTOR CONTROLLER IS USEDܾ౗ܵ೉ᅛݨրᏐஸᏂ˶ዠրᏐ༯৒་ห༯৒ဂᄏናསඟಮۿ፳ࠥᎅ˝ฒဂᄏઓଙംمᇴଏઐ઄ཎჁ˝ሼၼፆᇥ༯௵಼ߊᐎ࢝ȣ຅ူ˥

ૺࣴ

Remark Place the antenna of the receiver vertically with the plane

And don t let it close to the metal thing for assuring its sensitivity See pic1



Receiver

ANT

Figure 1

9 02 INSTALLATION FOR GAS POWERED MODELSࠂޱ৒೉ᅛݨրᏐMODELS FS GT38

Digital propotional radio control sytem

Http www flysky cn com

Battery

1 5AA 4

SWITCH

Servo

ཽ࡞ෙ

ࠝᄢქဧ

CH3

ދۀૺࣴTHROTTLE

ት಍ݾປလݤSTEERING SYSTEM

MODELS FS GT39

Digital propotional radio control sytem

Http www flysky cn com1 0 2 4 G O p e r a t i o n n o t esMatch line

ߖౕᄏFigure 1

Bind key

10 01 Matching (codeAInstall the battery to 2.4G transmitter and shut it down.

B 1˅ǄInsert the matching lines to the channel BIND CH3 port of the receiver. Figure.

CConnect the receiver battery to VCC port of the receiver, on the same time the two LED are flashing

DPress and hold the button on the transmitter, and then switch on the power supply.

FRelease the match button on the transmitter, take out the match line.

EObserve the LED on the receiver, if found that the LED is not flash anymore and that means successful

GInstall the server and then test.

HIf the tests fail, please repeat the action above.

IIf the tests success, then insert the power supply port into VCC, match complete.

(The above ways of match is only suitable on FLYSKY 2.4G products)

Our products are well matched in the factory, you do not need to match by yourself. But if your

are going to match the receiver with other transmitter, or you need to change a new receiver

or transmitter please follow the following steps:and this means the receiver are going to the match status.

Matched. This process about 5s˄Ⴄಏݨڄ඙ዠ۞ڏ෰ሞટ൨ߖ˨ഠႰᅶᐖ൨ߖޱᐗ؏ଙ༓ቫȣݏ຅ഠᇴ༯ࢸ௹ၖݨࠂ໠৒ઌᅞ൨ߖ༓ቫ˨৊ፃഠᇴࢺওᅐݨ༯৒৊ፃࠂ໠৒˨หഠւ຅ჲݨه્ઌᅞ˶ᏂႤಏݨ༯ࠂ໠ქဧمࢸෆྴ඙ൊ๻༯৒ދۀٯຉ༯৒ݨလݤପܑ་ଙ଄ݡ༯৒ݨዠຽ཰ؙܑ༘༯৒ઌຉ൨VCC LED

ࣷٶ༯৒໋ݨ຅ࠂᄆمዟຽ཰ؙ༘൨ߖڱࣂᏂܑڴܹዂ་ၼᐓቺ˥LED LED 5S

ࠂ໠৒Ꮠދۀ˨جࣴ؁ࠂ໠৒ȣ2 4G

൨ߖᄏٯຉ༯৒ݨလݤପˤ຅ူ˥BIND CH3

ࠂ໠৒໋ݨ൨ߖւᏁ˨๙ܸૺࠂ໠৒ދኺૺࣴȣˤᏂ˶مᇴཱྀૺւ˥ȣBIND

ཱྀૺࠂ໠৒໋ݨ൨ߖւ֜ޘ༯৒໋ݨ൨ߖᄏཽ࡞ෙᏐ໋جလދ٬༮຅٬༮ዸ᎚ࡲሞ໋ޱᐗNG

຅٬༮˨ዸދኺါٯຉ˨൨ߖၞڱȣOK VCC

Ꮒሞ໋൨ߖࠝࠈઊ༤ኂݨڄ඙ȣFLYSKY 2 4G

ߖᏔ࿂LED

Battery

ދۀ

Receive

༯

ߖౕւഩ

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comPower on

A Cut off the receiver power supply.B Cut off the transmitter power supply.Tx power ON

Tx power off

Rx power ON

Rx power off

Shut down

10 03 Shut down˖10 02 power onAConnect every part.

BSwitch on the power supply.

CConnect the power supply.

DReceive LED light solid.

EFinish and use. ࣴ؁༯৒ݨދኺ˷ࣴ؁ࠂ໠৒ݨދኺࢵىஸ˷ܸૺࠂ໠৒ދኺૺࣴ˷ஸလ༯৒ދኺ˷༯৒/('்˷༓ቫ

MODELS FS GT311

Digital propotional radio control sytem

Http www flysky cn comL

DSC

CHATGER

SWD

SWE

IMODULE AUX SW THROTTLE TRIGGER

SWB

default throttle trim

LCD SCREEN

POWER SW HOOK

5SWF2 6SWA

default steering trim

7FM ANT 82 4G ANT9UP

edit key ADOWN

edit key

CENTER

edit key

DBACK

edit key

ESWC

GSWF1

HBAT BOX

FSTEERING WHEEL

BDIAL

edit key

FRONT

SIDE

BACK

1 1 . E a ch p a r t o f t h e t r a n s mi t t e r

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comST TRIM BEEZ

POWER VOLTAGE

TH TRIM

LOGO

MODEL NAME

1 2 . T r a ns m i t t er f u n c t i o n n o t e s

DR SW ON

ABS SW ON

ABS START

LCD MAIN PAGE

ST TRIMࠝᄢߨၴޛᏔ࿂BEEZქဧ٣ᐗ໵ሾؙ༘໵ሾૺූ˷ؙ༘໵ሾࣴ؁ܑࣂംૺූݨࠝ༗༡ዠૺ৒ڌւPOWER VOLTAGEދኺދᆥᄄ༘˷ݕݱኂ་ࠂ໠৒হࠂ۞הડ9 0V

TH TRIMት಍ၴޛᏔ࿂LOGOࢎᅉഠ༓ቫࣇྲྀݨڄ඙

MODEL NAMEܑᅓგ༡ഉݨࠂ໠৒ݕ෰༓ቫ৒᎘ೃڮ˷ܑାࠂ໠৒ᐎߢଙܬۨࢴ৒᎘೉༗

DR SW ONܹᄯޱૺࣴሞૺූܑࣂംᅶ࿷෰ઌᅞ໤ުُቸ˨ᄚษٕ݉˥PROG KEY

ABS SW ONܑᄄؙ༘༘ිޱૺࣴሞૺූܑࣂംᅶ࿷෰ઌᅞ໤ުُቸ˨ᄚษABS PROG

ABS STARTܑᄄؙ༘༘󰌂ዠዑᅞ᎒ABS

Thanks for using flysky s productsLOGO

This transmitter can save 8 type of models you can give them each a name

MODEL NAME

BEEZThe system operation voice operation voice means open means shut off

POWER VOLTAGE

Display the power voltage there is a warning voice when the voltagelower

ABS SW ONThis means the ABS is switch on this function need to be set in advance the details 

Before open this function should set it in advance pls see the PROG

DR SW ONABS STRATThis means the ABS function is in run

TH TRIMThrottle in the trimming status

ST TRIMsteering system in the trimming status

than 9 0vKEY menupls see the PROG KEY menuKEYٕ݉˥BACK

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comM a i n m e n u

ࣂം཭ಿ˶ᄄ༘ྱቸଙޛ፟ݨٕ݉˨࣎ৼᄞ12

٣ᐗࠝࠈ˶လ৊ᆋനւୢᆍዷᄐߖ቎ٕ݉˷جւ๕ުઌຉUP/DOWN

٘བྷ཭ಿMODEL SEL˖ፆାࠂ໠৒ଙ࿷ࣅࢴܬࠥ৒᎘˨جଙྞ་ޛ۞༓ቫȣNAME EDIT˖ೃ᏶ݨ،ᅂ˷REVERSE˖󰌂ࠔᄢ໤ުSUBTRIM˖ࡦᎼၴޛDR˖ལ᎚״ఴܹᄯޱᐗޛ፟E POINT˖ߨோޛ፟ARC˖ት಍০ࠝᄢฺᄏޛ፟˷DISPLAY˖လݤ༾۞Ꮤ࿂ᄄ༘˷ABS˖ຮڝࠠדླྀ໤ު˷ST DELAY˖ࠝᄢߨࠔ቎ྑߊ໤ު˷TH SPEED˖ት಍ࠔ቎ྑߊ໤ު˷PROG KEY˖ଙ،ڴւ໤ުRIGHT

LEFT

Press button ENTERUP

DOWN

ENTER

BACK

Function Introduction:

Parameter Introduction:

Name edityou could edit your own brand or name itto the tx

Reverseforward and reverse setting

Subtrimassistant trim

DRdouble rate dr adjustment

E pointto adjust the angle of each channel

ARCadjustment of the throttle and steering system curve

Displaydisplay the channel output status

ABSanti skid brake system

ST delayset the reacting speed of the steering system

TH speedset the reacting speed of the throttle

PROG keyset the programmable key

Model selthis tx can save 8 different models and you can get to use any one of them

Operation Method:

Choose the menu by press the UP/DOWN button, and then press ENTER to enter in.

To display all the 12 menus..

in any timePage1 Page2

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comM OD EL S EL

Edit n am e

ࣂം཭ಿܑାࠂ໠৒ଙ࿷ࣅࢴܬۨ৒᎘೉༗လܑٕ݉ଙઌ໶ྞሬࢺও٣ᐗࠝࠈလ৊ւୢᆍዷᄛᇴݨ೉༗جւ๕๭ޛ۞83'2:1',$/٘བྷ཭ಿ༡֙ࢴၞ้߂மࢴمဠݨ৒᎘೉༗٘བྷ02'(/ˉ02'(/ࣂം཭ಿܑࣂം༡ߖݕ෰৒᎘೉༗ઌᅞೄೃሞࠝ؏৽ሮุ࠶ܑೃ᏶ଙઌ٣ᐗࠝࠈလᆍዷߖೃ᏶ݨݾ৮ႍઌᅞ،ᅂလᆋനւୢᆍ83'2:1ೃ᏶ڌߊᐎڌႍଙቫ᏶࡛ !"#$%&'()*+,-./0123456789:;<=>?@٘བྷ཭ಿ০ଥࢯሞܵݡمဠ৒ᅛႰᅶࠕࡲ໤ުݨ೥ݨࠝ؏٣ନፃቫဠህࠂ໠৒ୢ٣ନمဠ৒ᅛجࠕর຅مᄛؐࢺݕ෰೉༗ዸւ฿ᄫجဿ۞(;,7)/<6.<༡ࢁ৒᎘ݨೃ᏶ܑೃ᏶༡ଙቱഠᏴማ،ᅂݨᅞ๬ህ،ᅂၞ้ଙւ༓ቫፃݨሬኾઌᅞ،ᅂዷᄛᇴݨ᏶ೞ৊᏶࡛ၞ้،ᅂၞڱւ๕๭ܬۨجࠕর຅مᄛؐࢺݕ෰ೃ᏶ዸւ฿ᄫجဿ۞(;,7FLYSKY0 is the original model name you can edit it by yourself

Function Introduction

This function is to name the 8 models in order to memory and distinguish

Function IntroductionOperation MethodParameter IntroductionOperation MethodParameter IntroductionSelect the position which need to be changed by the UP DOWN key Select the wordyou needed by the knob switch after finished press the enter key to save and returnBackif you don't want to change the name, just press exit key to cancel and exit.

Name Length The longest is 8 wordsAvailable words 0 1 2 3 4 5 6 7 8 9 ABCDEFGHIJKLMNOPQRSTUVWXYZ ! #>?@and blank

MODEL1 MODEL8 are 8 different model parameterSelect the models by the key UP DOWN or the knobThis transmitter can save 8 type models so that you the user can use one transmitter

control different models

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comR e v e r se

S u b t r i m

ࣂം཭ಿܑࣂം༡ߖ༾۞လݤࠝᄢት಍ປလݤᐖ󰌂ࠔᄢݨޛ፟ሞ؏༤٣ᐗࠝࠈလւୢᆍዷᇴޛ፟ݨလݤ๙လᆋനւୢ83'2:1٘བྷ཭ಿ67ࠝᄢလݤ˷7+ት಍လݤ˷&+လݤೃڮ˷5(9ࠔᏊ˷ࣂം཭ಿܑࣂം༡ߖཽ࡞ქဧઌᅞࡦᎼޛ፟ፆᇥଙሞࠝᄢት಍ປလݤ༓٣ନፃࢺࠝ؏଼ޛ፟৒ᅛᐎ᎗༓ڝ೉ዠ፳ᄏᅞ༓་፳ᄏߊᐎ٣ᐗࠝࠈလւᆍዷᇴޛ፟ݨလݤ๙လւୢઌᅞ83'2:1',$/٘བྷ཭ಿ9$/80(˧ݡ˩቎مဠݨཽ࡞ქဧمဠᏐ൨ࠝ༗ሞܵݡᐎ᎗󰌂๕ݨ٣ᐗࠝ༗ઌᅞࢂؐၞڱւ๕๭ܬۨجဿ۞຅ւዸمܬۨဿ۞(;,7ߖཽ࡞ქሼࣕ৊Ꮠ൨ႜ࿸ྱڄ໶ߊඍٸݨႜ࿸ઌᅞᅬ󰌂ܙߺབྷ૏ݨޛ፟፳ݡഉݨཽ࡞ქဧߊܵݡഉݨᇴำၞڱւ(17(5ܬۨجဿ۞຅ւዸمܬۨဿ۞(;,7ݾປလݤࡦᐗလݤȣ$8;125󰌂ڋ˷67ࠝᄢလݤ˷67$7(လݤᏔ࿂˷7+ት಍လݤ˷&+လݤೃڮ˷Function Introduction

Function Introduction

Operation MethodParameter Introduction

Select the adjustment channel by the key UP DOWN change the value by the key DIAL

To do the assistant adjustment of the servo system throttle and Thesteering system

Third channel this can amend the servo angel deviation created by the structure and

assemble Problem

until the servo angel arrive at your requirement after finished press ENTER to save and

exit if press EXIT directly then the data won t be savedCH

Range

channel name

throttle

steering system channel

from 120 to 120

Adjustments the forward and reverse direction of the outputs channel steering systemOperation MethodParameter IntroductionSelect the adjustment channel by UP DOWN key adjustments by the knob switchCH

STATE

NOR

AUX

REV

channel name

throttle channel

the status of the channel

steering system channel

normal

The third assistant channel

reverse

Throttle and the third channel to apply to the different servo system and assemble methodsafter finished press enter key to save and exit

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comDR

ࣂം཭ಿܑࣂ༡ߖࠝᄢလݤઌᅞལ᎚״ఴ༾۞ନᎈሞ؏ݧݡ௉᎘مဠݨ٣ᐗ೉༗ୢ༤቎مဠݨ٣ᐗᇴำઌߺଙሞݧݡᐎݨ٣ନܑޱ٣ᐗࠝࠈလւᆍዷᄞ೥๙လւୢઌᅞབྷ૏ݨޛ83'2:1',$/፟ၞڱւܬۨجဿ۞຅ւዸمܬۨဿ۞(17(5(;,767ؙ༘ࠝᄢလݤ˷٘བྷ཭ಿ'5212))ݕ෰Ꮤ࿂ؙ༘ማܸૺؙܑ༘ࣂംಃૺූབྷ૏ޛ፟ࠖၹؙཽ༘࡞ෙޱᐗᐎᄯؙ༘ˁˉˁˁᐗଙလւྞ་ܸૺࣴ؁جଙሞလၖىւઌᅞབྷ૏ޛ፟ህֱ໤ުዠււݨ໤ުٕ݉6:'352*.(<ཽ࡞ෙޱᐗᐎܹܑࣂംቫኂࢂؐߖၹ๤ଥݙႍᎅྱᐖᏊᄢ٣ᐗݨ௵಼ߊ˨༓ݧ෰ઌናຮڝࠝᄢዑޱᄄݧࢺEXP፺བྷᅛ٣ᐗ໤ުᆤྑ৊๿ཫޛෆ፷مቘᄜᐎܹᅞڴȣFunction Instruction:

Operation methodchoose the item by UP DOWN button then adjust the data by the knob then save theDouble output control to get 2 different operation mode and suitable for different operation

requirement. This function can be shut or open by a button in anytime normally, we set this

data and press ENTER to quit the adjustment if press EXIT it means quit the systemdirectly without saving the dataParameter Introductionfunction to the key SWD, pls see PROG KEY menu.

EXP: exponential operation setting: this function is used to change the sensitivity of the servo

ST˖steering system

DR: The current status, ON means this function opened, OFF means this function closed.

around the neutral position. It has no effect on the maximum servo travel.

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comEND POIN T

٘བྷ཭ಿࣂം཭ಿܑࣂം༡ߖ༾۞ߨோܹᄯઌᅞޛ፟ሞ؏๡ഉࠝᄢት಍ປလݤޛ፟ܑࣂംሪଙሞߖཽ࡞ქဧݨمߖڮઌᅞᅬ󰌂ሞ؏༓ᐓቺߨோܵݡ״ఴߖڮܙߺݧݡᐎ٣ନ٣ᐗࠝࠈလւᆍዷᅶᇴࢂؐݨလݤج༓ቫݕ෰ᄐߖ቎ݨ٣83'2:1๙လւୢઌᅞབྷ૏ݨޛ፟ၞڱւܬۨج',$/(17(5;

ဿ۞຅ւዸمܬۨဿ۞(;,7.

67ؙ༘ࠝᄢလݤ˷བྷ૏ޛ፟ࠖၹݡˉˁˁ'1༾۞ჲֹڴ˷

$8;ࡦᎼလݤˤݾປလݤ˥

83༾۞ֹ໋ڴ˷7+ؙ༘ት಍လݤ˷&+လݤೃڮ˷ݨߨோܵݡഉݨᇴำܑޛ፟࠶ၼ௉ى࠶ଙઌᅞ݉؋৊83'2:1ନࢉࠝᄢନᎈ൐৊ት಍ଫ༰০ૺࣴᆍዷ݉؋৊$8;83'2:1.

To choose the channel by UP DOWN button use the current controlStick directionFunction Instruction:

use this when performing left and right steering angle adjustments, throttle high side/brake

Operation methodcontrol disc or throttle ouch or the AUX switch to choose the single side Then adjustthe data by the knob then save the data and press ENTER to quit the Adjustment ifpress EXIT it means quit the system directly without saving the dataParameter IntroductionSTmeans direction channel

THmeans throttle channel

CH˖channel name

UP: the first haft part of outputs

DN: the second half part of outputs.

AUX: the assistant channel(channel 3)Rangefrom -100% to 100%

side operation amount adjustment, and channel 3 servo up, side/down side operation amount

adjustment during linkage.Correct the maximum steering angle and left and right steering

angles when there is a difference in the turning radius due to the characteristics, etc. of the

Vehicle

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comARC

ࣂം཭ಿܑࣂംཎኂህ᎘࢝৬ݨᏈᇿ໤ުࣂംྴ༡ߖ༾۞བྷ૏ࠝᄢလݤት಍လݤઌᅞฺᄏݨ໤ުሞܵݡ༾۞ംࢸ౗ܵቇฦ০ཽ࡞ქࢺඇ൨ࢺ஛༓ෆܵݡᐎࣀᐗᄵఴ˨ܑᄞࣂംᇼଙሞࢸ૑༓ቫፃዠ༓ቫ་ݨრࣻୢઌᅞ໤ުሞܵ

ݡᐎݨ٣ᐗࢎ૧ဠᇥዠمဠݨບݤএથډݼمဠݨษ୆ჲଙઌᅞ༤ݕ

٣ᐗࠝࠈܑ࠶௉৬෰৬ቸ௉ᄞ࠶༡လւᆍዷ677+83'2:1ᅶᇴࢂؐݨလݤ67৊๙ւ๕๭ઌຉჲህ৬ٕ݉ݾࠀ৬ᇽಮ࠶ࢴ໤ުއလ7+/+ւᆍ83'2:1ዷᅶᇴࢂؐݨއዟလւୢઌᅞབྷ૏ݨޛ፟ၞڱ',$/ւ๕๭ܬۨجဿ۞຅ւዸمܬۨဿ۞(;,767ؙ༘ࠝᄢလݤ˷7+ؙ༘ት಍လݤ˷/+˩˩˩˩˩٘བྷ཭ಿࣂം཭ಿܑࣂം་ߖྱቸ༾۞လݤݨབྷ૏ઌᅞٳ০ࠝᄢት಍ປလݤ٣ᐗࠝࠈዠᎹٕ݉ჲᆍዷٕ݉ւ๕๭ઌຉ৪ଙȣ',63/$<٘བྷ཭ಿ67ؙ༘ࠝᄢလݤ7+ؙ༘ት಍လݤ$8;ࡦᎼလݤݾປလݤDISPL AY

ݨޛ፟ܙߺ๡ഉݨڝᏳ٣ᐗܵݡၞಈ٬ଙٳလݤݨ༾۞ோ০༾۞ࠝᄢȣ

Operation Method:

Operation introductionOperation introductionthis function is a kind of high class professional setting system it can be used to setthe output curve to let the output to match the motor engine and servo much betterand anc it also can according the operator s feeling to set to get to get theoptimaloperation feelingWe need to set 2 channel ST and TH press the UP DOWN button to select the channel which you want to set then press DIAL key to next class manual the next manualhas 5 setting points L 1 2 3 and H choose the point by press the UP DOWN buttonthen adjust the data by the DIAL key then save the data and press ENTER to quit theadjustment if press EXIT it means quit the system directly without saving the dataST

THsteering system channel;

throttle channel;

L: 0-100;

1: 0-100

2.: 0-100

3: 0-100

H: 0-100

This function is to display and check the output dataEnter the main manual then choose the display manual to enter inSTsteering system channel

THmeans the throttle channel

Parameter IntroductionParameter IntroductionAUX: the assistant channel (channel 3)

MODELS FS GT3

Digital propotional radio control sytem

Http www flysky cn comࣂം཭ಿܑࣂംཎኂህ᎘࢝৬ݨᏈᇿ໤ުࣂംྴݨࣂം༡ቫኂڝᏳݨࠠד٣ᐗࠝࠈလւᆍዷᅶᇴࢂؐ٘བྷݨᄞ೥ዟလᆋനւ83'2:1ୢઌ٘བྷ཭ಿ5$1*(ຮڝ་ߨ༾۞ோབྷ૏ޛ፟ࠖၹ˷ˉ&<&/$%6ຮڝ඗ఴབྷ૏ޛ፟ࠖၹ˷ˉ'87<ຮڝއ་བྷ૏ޛ፟ࠖၹ˷ˉ'(/$<$%6ݨຮڝිޱᆿ་ࣂം໤ުབྷ૏ޛ፟ࠖၹ˷ˉ/(9(/$%6ዠ༰ޱ೉༗ჲݨຮڝිݨිޱއབྷ૏ޛ፟ࠖၹ˷ˉ670$%6ٓቫܸࠝᄢߨ೉༗ᇼિ༡፽ቸዠᏊၘ་ූޱܑ೉༗ჲᅶ໤ުህࢴිޱ۝༖፷ᐎݱ˨ᐎ࢝ฒࠝᄢߨ௉؋޾ᅶ໤ުȣ0$18$/༰ޱ೉༗ܑ೉༗ଙလւઌᅞૺූ৊ࣴ؁ȣAB S