Flycam FLOWLINE 600N User manual

Instruction Manual
Flycam Flowline Camera
Support (FLCM-FLN-(N))

2
Subject Page
Foreword 3
Introducon 4
Specicaons 5
Safety Hints 5-6
Assembling 7-9
Warranty 10-11
Table of Contents
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.

3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Proaim Flycam Flowline Camera Support , you have just joined a
host of designers, engineers, machinists, assembly, customer service and oce sta
that take great pride in all that they do. Our mantra of connuous improvement has
been the guiding principle of how we conduct our business since day one.
Once you have the opportunity to experience your new Proaim Flycam Flowline
Camera Support , we hope you will agree that we cra quality products at a
compeve price. Products designed to meet and exceed the standards of today’s
real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!

4
Flycam Flowline is a professional Ergonomic Stabilizing Camera Support which ensures
comfort & lets you shoot 24x7. It is designed to reduce the stac load on neck and
shoulder muscles and distributes it to your torso. Flowline is properly packed in a
protecve bag pack to ensure safety of the product & for travel convenience.
Introducon
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.

5
Safety Hints
 Always hold the camera when working with Flycam Flowline. There is safety belt
which you aach to camera and hook on the jacket.
 Never undo the waist buckle when camera is aached to Flycam Flowline! The
weight of camera will pull the top of Flycam Flowline down, and you might lose
control of camera.
 It is important that Support Arm is vercal. The weight of camera should primarily
be on your hips. If it is lopsided, the load will be unevenly distributed on hips and
camera might hit the Arm.
 The hip/waist belt should be ghtened so that the rig doesn’t slide down around the
hips. Shoulder Strap is mainly for balancing the Flowline, and prevent it from lng.
 If the shoulder arm is too high or too low, rst try adjusng the Support Arm in
relaon to Support Jacket or hip/waist belt. It is also possible to adjust the tube
inside Support Arm, but that might require adjusng the ghtness of Suspension
Line.
SPECIFICATIONS FLOWLINE 600N FLOWLINE 750N
Product Weight: without
packing
Complete 4kg (9lb) Complete 4kg (9lb)
Height: Mounted: 100 cm (39'')
Folded: 60 cm (23.6'')
Mounted: 100 cm (39'')
Folded: 60 cm (23.6'')
Capacity: 12 - 15 kg (26.4 - 33 lb) 15 - 19 kg (33 - 41.9 lb)
Suspension line length: 107 cm (42'') when fully
stretched
107 cm (42'') when fully
stretched
Top Bar Length: Including extension : 470mm
Excluding extension : 340mm
Including extension : 470mm
Excluding extension : 340mm
Min. waist hip strap length: 87 cm (34'')) 87 cm (34''))
Max. waist hip strap length: 142 cm (56'') 142 cm (56'')
Extension: 13 cm (5'') 13 cm (5'')

6
 If you work with the Flycam Flowline under special condions, i.e. in a car, boat,
plane or helicopter, make sure to use Safety Belt.
 If you don’t use your Flycam Flowline for more than a couple of months, make sure
to store it standing upwards. Otherwise the shock absorber gasket might dry out.
Friendly Tips
 It is as simple to put the Flowline on as a backpack. Just don’t forget to adjust it so it
feels comfortable.
 When aaching the hook onto camera, you might nd it easier to put the camera
on a table or bench. Try and nd right balance before you secure the hook.
 Try to keep the camera as close to your body as possible, to avoid unnecessary
strain on your back.
 When lming upwards, you might nd it easier if you have the camera tucked under
your arm.
 When shoong at hip or knee level, lean backwards when pushing the camera
forward; thus minimizing the load on your back. You can aach LCD screen, to get
beer control of the shot.
 When shoong at hip level during longer periods of me, rest the camera on hip/
waist belt to increase stability.

7
 Join Support Arm Secon with Secon on Support Jacket, by simple push-t technique.
 Slightly loosen all the four Adjustment
Knobs provided on back of Support
Jacket to adjust the height of Support
Arm.
 You will receive Flycam Flowline packed
in Bag. Open the Bag and take out your
Flycam Flowline.
NOTE: Assembling steps are same for all Models.
Assembling

8
 Adjust Support Arms on both sides. This
will ne tune your Jacket to a comfortable
posion and also help in shiing weight to
your shoulders and hips.
 Loosen the knob on hook and aach camera with it. Tighten the knob back to ensure slip-free
connecon.
 Wear Support Jacket and ghten the buckles provided at waist and chest. Then adjust unl you
nd it comfortable.

9
 Finally, aach one end of Safety Belt with camera and other end with Support Jacket, for more
safety & protecon.
 When folding Flycam Flowline, always
make sure to put the upper part of Support
Arm inside hip/waist belt and fasten buckle
at the hip/waist belt. This will prevent
Suspension Line from wearing.
NOTE: Leave a gap of approximately 2cm/1”
between the top of Camera Hook and
Support Arm.

10
YOUR FLYCAM FLOWLINE CAMERA SUPPORT
ALL DRESSED UP AND READY TO GO!
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note that we
will not cover any shipping costs for returning the product to us. If any VAT or import dues are
applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or
service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.

11
Replacement parts of the product will be provided at nominal cost (covering the cost price of
the ,replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost
of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back the
item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.