FONESTAR WM-40 User manual

WM-40
WALL MOUNT MIXER WITH
USB/SD/MP3
INSTRUCTION MANUAL
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 1

We take this opportunity to thank you for buying this product.
We recommend you read the instruction manual before switching on the machine and follow the instructions
that are given. Keep the manual for future reference.
SECURI Y AND HE ENVIRONMEN
ELECTRICAL SECURITY
Check that the current in the mains connection where the machine is to be installed corresponds to the
power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or disconnect
the equipment from the power supply, pull the plug firmly out of the mains socket holding the plug, never the
cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.
CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.
Do not place anything inside the machine.
LOCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.
Do not place the machine near magnetic fields or static electricity.
Do not use surfaces which vibrate or receive impact.
Do not pile machines on top of one another.
VENTILATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.
PERIODS OF INACTIVITY
When the machine is not going to be used for a long period of time, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine is
switched off. If it is not going to be used for a long period of time, disconnect it from the mains.
THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine could
contain substances that are harmful to the environment or human health. To minimize the effect of these
substances the machine must be correctly managed and recycled when you decide to dispose of it.
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the
collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase
similar equipment, so that the dealer can dispose of it correctly (at no added cost).
EN
- 2-
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 2

- 3-
EN
SIGNIFICANCE OF HE SYMBOLS ON HE MACHINE*
The symbol formed by the expression “Class 1 laser product” written in a rectangle
indicates that visible or invisible laser radiation could be produced. Avoid direct expose to
the laser.
The symbol formed by a ray of lightening inside a triangle shows that the machine has
connection terminals or a circuit with areas with a current which could cause an electric
shock, even in normal working conditions.
The symbol formed by an exclamation mark in a triangle shows that the instruction manual
must be referred to for information on how the machine works and its use.
The symbol formed by one square inside another square shows that the machine has
double electrical insulation.
The European Community symbol shows that the machine complies with the current
European Union legislation, as well as its transposition to local legislation.
The symbol of a rubbish bin crossed out and over a horizontal line shows that when the
product is disposed of it must be done properly, placing it in a special selective electronic
and electrical equipment container or through a dealer when purchasing a similar product,
at no additional cost. It also shows that the machine was put on the market after 13th
August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic
recycling, and its Spanish equivalent R.D.208/2005).
In accordance with what is set out in the aforementioned decree, FONESTAR is registered
in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI
(Registro de establecimientos Industriales), with the entry number 001851.
*It is possible that some of these symbols do not appear on the machine.
EXEMP ION OF LIABILI Y
The characteristics of the equipment and the content of the manual can change without forewarning.
FONES AR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the
information supplied in this instruction manual, and specifically disclaims any implied liability for marketability
or fitness for any other use.
All rights reserved by FONES AR, S.A.
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 3

DESCRIP ION
-Wall mount mixer for surface or flush mount installation.
- Surface box to facilitate installation and wiring.
- Switched power supply source.
- USB/SD/MP3 player.
-Remote control for MP3 player.
CON ROLS AND FUNC IONS
FRON PANEL
1.- OU PU : LED indicators of output signal level. It regulates the individual input volume controls so that
the level does not exceed the green LED indicators. The red LED indicators show saturation or a
distorted signal that could lead to damage to the mixer.
2.- USB/SD/MP3 player information display.
3.- 7/8: one short press of these buttons lets you move to the previous/following track. A long press
rewinds/fast forwards playback.
4.- VOL-/VOL+: USB/SD/MP3 player module volume controls.
5.- SD/USB: allows the audio source to be selected between an SD memory card or a USB storage device,
if both are connected to the equipment.
- 4-
EN
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 4

- 5-
EN
6.- EQ: equalization control for the USB/SD/MP3 player audio signal. Press this button repeatedly if you
wish to choose between the different existing equalizations.
7.- 12: a short press of this button starts and pauses USB/SD/MP3 playback. A long press allows selection
among the different playback modes: repeat all tracks, repeat folders or random playback.
8.- q: on/off button for the USB/SD/MP3 player.
9.- REMO E: infrared signal receiver for the USB/SD/MP3 player remote control.
10.- VOL 1/VOL 2: volume control for inputs INPUT 1-2.
11.- LINE/PHAN OM/MIC: sensitivity switches for inputs and 15 V phantom. These switches have 3
positions:
LINE: in this position, high level audio sources such as preamplified microphones, CD players, etc. can
be connected to inputs 1 and 2.
PHANTOM: in this position, electret condenser microphones that require 15 V phantom power can be
connected to inputs 1 and 2.
MIC: in this position, 30-600 Ω low impedance dynamic microphones can be connected to inputs 1 and 2.
Use this switch with the volume at its minimum to avoid noise.
12.- INPU 1/INPU 2: microphone/line inputs that use a combined XLR and 6.3 mm jack connector,
accepting 30-600 Ω unbalanced and balanced microphone signals and balanced electret condenser
microphones that require 15 V phantom power, present in pins 2 and 3 on the XLR connector. They
accept high level, balanced or unbalanced line signals from CD players, etc. Select the appropriate
position using the switch, taking care to turn the volume controls down to minimum to avoid noise.
CAUTION: when you connect or disconnect an unbalanced microphone, the switch must be in the MIC
position. If the switch is in the PHANTOM position the microphones could be damaged. When you use
microphones that do not require phantom power, make sure that you move the switch to the MIC
position, as the voltage present in pins 2 and 3 of the XLR connector can damage the microphones.
13.- BASS: reinforces or attenuates the bass frequencies ±10 dB.
14.- REBLE: reinforces or attenuates the treble frequencies ±10 dB.
15.- Volume control for the AUX 1 input.
16.- AUX 1: aux 1 input, 3.5 mm stereo jack connector.
17.- Volume control for the AUX 2 input.
18.- AUX 2: aux 2 input, 2 x RCA connectors.
19.- LINE OU : LINE OUT output, 2 x RCA connectors.
20.- SD: connection port for SD memory cards. Accepts memory cards up to 16 GB.
21.- USB: connection port for USB storage devices USB. Accepts memory drives up to 16 GB.
22.- POWER: on/off switch.
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 5

REAR PANEL
1.- MAS ER (BAL): balanced stereo line level output, 2 x XLR connectors.
2.- MAS ER (UNBAL): unbalanced mono line level output, 2 x RCA connectors.
3.- Output level selector for 100 mV, 300 mV or 1 V.
4.- Output channel operating selector: mono or stereo.
5.- Socket for power supply cable connection.
6.- FUSE: protection fuse.
REMO E CON ROL
1.- q: USB/SD/MP3 player on/off button.
2.- S OP: stops current playback.
3.- MU E: activates/deactivates the audio output.
4.- MODE: allows the audio source to be selected between USB
storage device or SD memory card.
5.- REPEAT function. For repeating one audio track (ONE) or all
(ALL).
6.- EQ: USB/SD/MP3 player audio signal equalization control.
7.- 7/8: one short press of these buttons plays the
previous/following audio track from the USB/SD/MP3 player.
A long press rewinds/fast forwards playback.
8.- 12: one short press of this button starts and pauses
USB/SD/MP3 playback. A long press allows selection among
the different playback modes: repeat all tracks, repeat folders
or random playback.
9.- VOL-/VOL+: volume controls for the USB/SD/MP3 player audio signal.
10.- 0-9: number buttons to select the required audio track automatically.
EN
-6-
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 6

CONNEC ION AND OPERA ING
- Make the connections with the mixer and all the components of the audio system switched off and
disconnected from the mains.
- Connect the required audio equipment or microphones to the corresponding inputs. If you wish, connect
the USB storage device or SD memory card to their corresponding inputs.
- Check that the VOL 1 and VOL 2 volume controls and the aux input volume controls are at their
minimum.
- Check that the BASS and TREBLE controls are midway.
- Connect the balanced or unbalanced MASTER output to the line level input on an amplifier or a power
amplifier and choose the output level using the switch on the rear panel of the mixer.
- Power the equipment using the AC power supply.
- Once the connections have been made according to your needs, connect the equipment to the mains and
switch it on. After use do not forget to switch it off and disconnect the equipment from the mains.
-7-
EN
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 7

BLOCK DIAGRAM
- 8-
EN
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 8

ECHNICAL SPECIFICA IONS
WM-40
CHARAC ERIS ICS Wall mount mixer for surface or flush mount installation.
Surface box to facilitate installation and wiring.
Switched power supply source.
USB/SD/MP3 player.
Remote control for MP3 player.
RESPONSE Microphones: 80-15,000 Hz
Aux: 45-18,000 Hz
DIS OR ION Harmonic: < 1% at 1 kHz
INPU S 2 balanced mic./line, combo (XLR and 6.3 mm jack), 600 Ω 3 mV and 47,000
Ω 100 mV, switchable
1 stereo aux, 3.5 mm, 47,000 Ω 300 mV
1 stereo aux, 2 x RCA, 47,000 Ω 300 mV
OU PU S 1 balanced and unbalanced stereo/mono master, 2 x XLR and 2 x RCA 100
mV, 300 mV or 1 V, selectable level
1 line out, 2 x RCA, 1 V
FUNC IONS USB/SD/MP3 player for flash drives up to 16 GB
LED output signal level indicators
CON ROLS Tones
Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10,000 Hz
Volume: inputs 1 and 2, aux 1 and 2 and USB/SD/MP3 player
PHAN OM 15 V
POWER SUPPLY 100-240 V AC, 8 W maximum
COLOUR Grey (RAL 7047)
DIMENSIONS Total: 237 x 239 x 102 mm depth
Insert: 219 x 182 x 91 mm depth
- 9-
EN
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 9

WARRAN Y
This product has been tested and has passed the corresponding quality control prior to being put on the market.
FONES AR guarantees the suitability of the product for its specified use during a period of 2 years from the
delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General
para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 Noviembre.
The lack of conformity in the first six months after purchase, due to a manufacturing defect, will be rectified with
no more than showing the proof of purchase. After six months FONES AR reserves the right to demand proof of
the product being sold with that problem.
This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts
due to use, breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and
internal manipulation of the device, the software or its components by unauthorized persons, and in general any
use that is unrelated to the nature and purpose of the product.
If any service is needed during the warranty period because of lack of conformity, please contact the business or
distributor where the product was purchased in no more than 2 months after being conscious of the problem. It
is only necessary to contact FONES AR if it is impossible or imposes an undue burden for them to solve it.
To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no
corrections or crossing out.
This document adds information, and never decreases the consumers’ rights, which in all cases are protected by
the Spanish law ‘La Ley General para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007
16 Noviembre.
FONES AR is a member of ECOEMBALA ES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our products
carry the symbol, backed by our membership and subscription to the above mentioned organization with the recycling
and subsequent management of our packaging.
FONESTAR, S.A. - NIF: A28780443 - Polígono Trascueto - 39600 Revilla de Camargo, Cantabria (Spain) www.fonestar.com
EN
- 10 -
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 10

- 11 -
EN
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 11

www.fon star.com
- 12 -
WM-40_MANUAL_(EN)_20180215_Maqu tación 1 15/2/18 12:22 Página 12