Forever Redwood DUSTIN'S FACE TO FACE GLIDERS User manual

ASSEMBLY INSTRUCTIONS FOR THE
DUSTIN´S FACE TO FACE GLIDERS
(WITH XW ROOF)
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
Drawing
Description
Leg Supports
Base Leg Supports
Straps Supports
Floor Frame
Removable Floor
Qty.
2
1
2
1
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
6
7
8
9
10
11
12
13
14
Drawing
Description
Bench Seats
Long Bench Supports
Short Bench Supports
Bench Backrests
Bench Arms
Triangles
Roof Panels
Slat
Beverage Armrests
If ordered
Qty.
2
4
4
2
4
2
2
1
4
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 3
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
I
J
Drawing
Description
5/16´´ X 4 ½´´ Bolts
(To attach the braces of the legs supports together/To attach
the straps support to the straps in the legs supports/To
attach the triangles to the legs supports).
5/16´´ X 6´´ Bolts
(To attach the braces of the legs supports together).
5/16´´ X 3 ½´´ Bolts
(To attach the braces of the legs supports together/To attach
the long bench supports to the bench seat/To attach the
bench seat to the straps in the legs supports/To attach the
short bench supports to the bench and to the straps in the
legs supports/To attach the backrest to the bench seats/To
attach the bench arms to the straps in the legs support & to
the bench seats).
5/16´´ X 3´´ Bolts
(To attach the base leg support to the legs supports ).
5/16´´ X 4´´ Bolts
(To attach the roof panels to the triangles)
2 ½´´ Deck Screws
(To attach the slat to the roof panels)
5/16´´ X 5 ½ ´´
(To attach the arms to the legs supports)
5/16´´ X 6 ´´
(To attach the arms to the legs supports)
3/4´´ Washers
3/4´´ Nuts
Note: Dimensions of your hardware will vary depending on size.

P| 4
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
Legs Supports
Base Leg Supports
Straps Supports
Floor Frame
Removable Floor
Bench Seats
Long Bench Supports
Short Bench Supports
Bench Backrests
Bench Arms
Triangles
Roof Panels
Slat
Beverage Armrests
If ordered
Note: Part numbers in the Drawing are
for reference only. These do not match
to the numbers marked on the parts
sent.

P| 5
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 1: Attach the braces in the legs supports (1) together with 5/16´´ x 4 ½´´ bolts (A) & 5/16´´ x 6´´ bolts (B) as shown in the
image. After attach the braces in the legs supports with 5/16´´ x 3 ½ ´´ Bolts (C).Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 2: Assemble the base leg support (2) to the legs supports with 5/16´´ x 3´´ bolts (D)as shown. Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
5/16´´ X 6´´ Bolts
1
1
5/16´´ X 4 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3´´ Bolts
2

P| 6
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 3: Use 5/16´´ x 4 ½´´ bolts (A) to attach the straps supports (3) to the straps in the legs supports (1). Each part has a series
of numbers that indicate where to attach the part with the corresponding number.
Step 4: Attach the floor frame (4) to the straps in the legs supports with ¾´´ washers & nuts (I & J). Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
5/16´´ x 4 ½´´ Bolts
3
¾´´ Washers
4

P| 7
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 5: Later the Step 4 put the removable floor (5)over the floor frame. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 6: Use 5/16´´ x 3 ½´´ bolts (C) to attach the long bench supports (6) to the bench seat (7). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
5
5/16´´ X 3 ½´´ Bolts
7
7
6

P| 8
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 7: Use 5/16´´ x 3 ½´´ bolts (C) to attach the bench seat (6)to the straps in the legs supports. Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 8: Attach the short bench supports (8) to the bench seats and to the straps in the legs supports with 5/16´´ x 3 ½´´ bolts (C).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
6
6
8
8
8
8

P| 9
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 9: Attach the bench backrests (9) to the bench seats with 5/16´´ x 3 ½´´ bolts (C). Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
Step 10: Use 5/16´´ x 3 ½´´ bolts (C) to attach the bench arms (10) to the straps in the legs supports and to the bench seats. Each
part has a series of numbers that indicate where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
9
9
10
10
10
10

P| 10
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 11: Use 5/16´´ x 4 ½´´ bolts (A) to attach the triangles (11) to the legs supports. Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
Step 12: Attach the roof panels (12) to the triangles with 5/16´´ x 4´´ bolts (E). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
11
11
5/16´´ X 4 ½´´ Bolts
12
12
5/16´´ X 4´´ Bolts

P| 11
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
Step 13: Attach the slat (13) to the roof panels with 2 ½´´ deck screws (F). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 14: Finally, use 5/16´´ x 5 ½´´ bolts (G) & 5/16´´ x 6 ½´´ bolts (H) to attach the arms (14) to the legs supports. Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
2 ½´´ Deck Screws
13
5/16´´ X 6 ½´´ Bolts
14
14
14
5/16´´ X 5 ½´´ Bolts
14

P| 12
DUSTIN´S FACE TO FACE GLIDERS (WITH XW ROOF)
www.ForeverRedwood.com
This completes the Glider assembly. Hope you enjoy your set for many decades. If you ever have a
problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.