Forever Redwood THE V-WING BENCH User manual

ASSEMBLY INSTRUCTIONS FOR
THE V-WING BENCHES
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE V-WING BENCHES
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
Drawing
Description
Seat
Legs
Diagonal Supports
Qty.
1
2
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE V-WING BENCHES
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach legs to the seat. / To attach the
diagonal supports to the seat and to the
legs).
3/8´´ x 7/8´´ Nuts
5/16´´ Washers
Note: Dimensions of your hardware will vary depending on size.

P| 3
THE V-WING BENCHES
www.ForeverRedwood.com
No
1
2
3
DESCRIPTION
Seat
Legs
Diagonal Supports
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
2
2
3
3
1

P| 4
THE V-WING BENCHES
www.ForeverRedwood.com
Step 1: Place the bench upside down. After that, attach the legs (2) to the seat (1)with 5/16’’ x 3 ½’’ bolts (A) with washers and
nuts. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Use 5/16’’ x 3 ½’’ bolts (A), washers and nuts to attach the diagonal supports (3) to the bench and to the seat. Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
2
2
3
5/16´´ X 3 ½’’ Bolts
5/16´´ X 3 ½´´ Bolts
1
3

P| 5
THE V-WING BENCHES
www.ForeverRedwood.com
Step 3: Finally, turn the bench over its feet.
This completes the Bench Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.