Sunjoy Havenbury L-GZ081PST-2 User manual

1
Havenbury Gazebo
Style # L-GZ081PST-2
DPCI# 009-05-0181
Product Size identification: 10’L x 10’W
Recommended persons for safe assembly: 3.
Congratulations – You’ve purchased a fine item from Target.
Our clear, easy to follow; step by step instructions will guide you through the project from start to finish. Feel confident that
this will be a fun and rewarding project. The final product will be a quality piece that will go together smoothly and give
years of enjoyment.
All you will need is a hammer, and a ladder at least 8.2 ft. high (or 2.5m).
WARNING:
 This unit is heavy and big. Do not assemble it alone. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all
the instructions first.
 Keep all children and pets away from assembly area. Children should be supervised when in the area of gazebo
construction.
 Some parts may contain sharp edges, wear protective gloves if necessary.
 Keep assembly area at least 6 feet away from any obstruction such as fence, garage, and house, overhanging
branches, laundry line or electrical wires.
 This is for outdoor use only. Install it on level ground.
 Keep all flame and heat sources away from this gazebo. The fabric meets CPAI-84 specifications for flame
resistance but it’s not fire proof. It may burn if being left in continuous contact with any flame source. The application
of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective.
 Check all nuts and bolts for tightness before and during usage.
Step #1: Set up the frame;
Step #2: Set up the top frame;
Step#3: Put on t
op canopy, mosquito netting
and fix the whole product.

2
Parts List
A1 Base 4pcs
B1 Base Cover 4pcs
C1 Post 4pcs
D1 Left screen 4pcs
E1 Right Screen 4pcs
F1 Screen Connector 4pcs
G1 Triangle Enhancement 4pcs
H1 Post Supporter 4pcs
A2 Short Hanging Bar 4pcs
B2 Top Bar 1 4pcs
C2
Top Bar 2
4pcs
D2 Hook 1pcs
E2 Top center Connector 1pcs
A3 Canopy 1pcs
B3 Top Canopy 1pcs
C3 Mosquito Netting 1pcs

3
44 pieces(AA) M6X15mm Bolt
32 pieces(BB) M6X20mm Bolt
76 pieces(CC) M6 Flat Washer
2 pieces (W2) M6 Wrench
Hardware Pack 1
8pieces(DD)
M5X15mm Bolt
8pieces(EE) M5 Extra-big Flat Washer
8pieces(FF) M6X30mm Bolt
8pieces(CC) M6 Extra-big Flat Washer
8pieces(GG) M6Nut
Hardware Pack 2
8 pieces(JJ)
Ф6X180 Stake
40pieces(KK) Plastic Ring
Hardware Pack 3

4
Step #1
Hardware Pack 1
（X44）AA
M6X15mm Bolt
（X32）BB
M6X20mm Bolt
（X76）CC
M6 Extra-big Flat
Washer
（X2）(W2)M6 Wrench
（X3）AA
M6X15mm Bolt
（X2）BB
M6X20mm Bolt
（X4）CC
M6 Extra-big Flat Washer
（X2）DD
M5X15mm Bolt
（X2）EE
M5 Flat Washer
（X2）FF
M6X30mm Bolt
（X2）GG M6 Nut
（X 4）kk Plastic Ring
1 pieces Touch up paint
Spare Hardware Pack

5
Insert post(C1) into base
cover(B1) , and then fix post(C1)
to
base(A1) by bolt (AA) and extra-
big
flat washer(CC),as shown in fig.1
Insert left screen(D1) into right screen(E1).Use
screen connector(F1) to fix the assembled
screens and tighten it by bolt (AA) and extra-
big
flat washer(CC),as shown in fig.2

6
Step#2
Use bolt (BB) and extra-big flat washer (CC
) to
install the assembled screens (D1&E1) onto
post(C1) and tighten them,as shown on fig.3 .
Use triangle enhancement(G1), bolt(BB) and
extra flat washer (CC) to fix post(C1)and
screens(D1&E1),and then tighten them,as
shown in fig.4.
Assemble post sup
porter (H1) to
post(C1) and screens(D1&E1),and then
use bolt (AA) and extra-
bit flat washer to
tighten them, as show in fig.5.
Hardware Pack 2
（X8）DD
M5X15mm Bolt
（X8）EE
M5 Extra-big Flat
Washer
（X8）FF
M6X30mm Bolt
（X8）CC
M6 Extra-big Flat
Washer
（X8）GG M6 Nut

7
Step#3
Hardware Pack 3
（X8）JJ
Ф6X180 Stake
（X 40）kk Plastic Ring
（X1）Touch up paint
Insert short hanging bar(A2) into top
bar 1(B2) and use bolt(DD) and
extra-
big flat washer(EE) to fix them,as
shown in fig.6.
Insert hook(D2)
into top center
connector(E2),as
shown in fig.7.
Ladder is required.One person lift
the
top center connector(E2) and insert the
assembled top bar 1(B2) into the
longer tube of the top center
connector ,as shown in fig.8-1.
Use bolt (FF),extra-
big flat washer (CC) and
nut(GG) to fix top bar 2(C2) to screen
connector(F1) and then tighte
n them,as
shown in fig.9-2
Use bolt (FF),extra-
big flat washer (CC)
and nut(GG) to fix short hanging bar(A2)
to triangle enhancement (G1) ,and then
tighten them,as shown in fig.8-2
Insert the end(with spring buttom ) of the the top
bar 2(C2) into the top center connector(E2),as
shown in fig.9-1

8
Put on canopy(A3),but do not fully assemble,as
shown in fig.10. Fully assemble top canopy(B3)
,as shown in
fig.11.
Fully assemble canopy (A3
) , as shown in
fig.12.
Use plastic ring(KK) to fix mosquito netting(C3)
to hanging bar behind the screens(D1&E1), as
shown in fig.13.
Lift base cover(B1) and
then use stake(JJ) to fix
t
he gazebo to ground,as
shown in fig.14

9
Care & Maintenance
Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protectsit from rusting.
However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched.
This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling
the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up
with rust inhibiting paint, which is included in the package (For Target Store orders only). Surface rust can also be easily
removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is
taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may be
difficult to remove. This can be prevented if the measure is taken to keep the product from oxidizing.
Limited Warranty
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your
item, provided the item is maintained with care and used only for personal, residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of 1 year. However, we
don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or
disassembling the product.
Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of
nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof
of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if
the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied
warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights, which vary from state to state.