manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Fracarro
  6. •
  7. Security Sensor
  8. •
  9. Fracarro IR1000 User manual

Fracarro IR1000 User manual

1. INTRODUZIONE
IR1000 è un sensore ad infrarosso di tipo digitale con
microcontrollore e con lente antistrisciamento. Grazie
ad un innovativo sistema di acquisizione e elaborazione
numerica del segnale proveniente dal piroelettrico (2
elementi) fornisce una copertura in lunghezza di oltre 18
mt e in larghezza di oltre 90°, garantendo un’assoluta
sicurezza contro i falsi allarmi. E’ dotato di un regolatore
di portata con il quale è possibile settare la sensibilità da
3 a 18 mt, ha un contatore a doppio impulso con finestra
di tempo di 5”, attivabile in caso di installazioni dove sia
richiesta una protezione maggiore contro i falsi allarmi.
La meccanica è stata realizzata in modo tale da non
utilizzare viti, sia per il fissaggio della scheda all’interno
del contenitore che per l’apertura del sensore stesso.
Per accedere alla scheda elettronica sarà sufficiente fare
pressione su un tasto sul fondo del contenitore (vedi
figura 1) e, facendo leva sui blocchetti in ABS, si potrà
estrarre la scheda elettronica e lavorare in piena libertà.
2. INSTALLAZIONE
-Utilizzandounostrumentosottile(esempiominicacciavite
a taglio), spingere il tastino tondo sul lato anteriore del
sensore (vedi figura 1) e aprire il contenitore.
- rimuovere la scheda elettronica dal fondo del contenitore
facendo leva sulla clips lato morsetti (figura 2)
- forare le apposite predisposizioni che si desidera
utilizzare per il fissaggio, oppure utilizzare lo snodo.
Altezza consigliata per il fissaggio 2m - 2,30m
- fare scorrere il cavo di collegamento attraverso l’apposita
guida sul retro del contenitore facendolo uscire dal foro
in alto.
NB: in fase di chiusura del rivelatore,porre particolare
attenzione affinchè la molla del contatto tamper si
posizioni correttamente nella sede conica ricavata
sul frontale dello stesso.
3. COLLEGAMENTO E REGOLAZIONE
Per quanto riguarda il collegamento alla centrale fare
riferimento allo schema 3.
- Per disabilitare completamente il LED WALK TEST
è necessario fornire una tensione 13.8 VDC fissa al
morsetto B/S, al contrario se si desidera disabilitarlo solo
a sistema disinserito, seguire lo schema di collegamento
di figura 3 .
- Con il JUMPER 1 è possibile configurare il sensore
a dare allarme con 1 o 2 rilevazioni (JP1 APERTO = 1
impulso, CHIUSO = 2 impulsi in 5”)
- E’ possibile regolare la portata da 3 mt a 18 mt,
(normalmente in un impiego di tipo residenziale dove
i locali protetti non sono eccessivamente grandi è
consigliato regolare il trimmer a metà corsa).
1. INTRODUCTION
IR1000 is a digital, microprocessor-controlled PIR. Due
to its innovative numerical sampling and processing of
the PIR signal (2 elements), it has a detection range of up
to 18 m away from the detector with an angle of over 90°
and allows to distinguish the true motion from any other
disturbances causing false alarms. It features a regulator
to adjust its range from 3 m to 18 m and a double-impulse
event counter with a time window of 5 sec., selectable in
installations where an improved protection against false
alarms is required. The housing does not require any
screws neither to fasten the electronic board to the base
nor to open the detector. To disassemble the detector
just press the tooth on the bottom of the case (see figure)
and pull out the PCB by pushing the clip and by levering
on the ABS supports (see figure 1). In this way it will be
possible to freely work on the PCB.
2. INSTALLATION
- By using a thin screwdriver, push the round tooth on
the bottom (see figure 1) and open the housing
- Remove the PCB from the base (figure 2)
- Use a screwdriver to pierce the knockouts on the side
of the base where you wish to attach the detector to the
wall or use the optional swivel bracket. (height)
- Route the wires via the rear channel into the base and let
them pass through the hole on the top of the housing.
NB: while the detector is closing, make sure that the
tamper contact spring is positioned correctly in the
conic seat in the front.
3. CONNECTIONS AND SETTINGS
As for the connections with the control unit please refer
to figure 3.
- To disable the LED WALK TEST you have to apply a
voltage of +13,8 VDC at terminal B/S, while if you want to
disable it only when the control unit is disarmed connect
a plus voltage only when the system is disarmed follow
the connections shown in figure 3.
- With JUMPER 1 it is possible to determine if the detector
trigger an alarm after 1 or 2 consecutive motions (JP1
OPEN = 1 impulse, CLOSED = 2 impulses within 5 sec.)
- It is possible to adjust the coverage within the range 3
m to 18 m. In an usual residential premise it is suggested
to regulate the trimmer at half its range.
IR1000
SENSORE INFRAROSSO CON TECNOLOGIA DIGITALE- DIGITAL PIR DETECTOR -
DETECTEUR INFRAROUGE - SENSOR DE INFRARROJO
ITALIANO
ENGLISH
2
FRANÇAIS
1. INTRODUCTION
Le IR1000 est un détecteur infrarouge digital avec un
microcontrôleur.
Grâce à l’innovant système d’acquisition et de traitement
numérique du signal du détecteur pyroélectrique
(2 éléments), il a une portée de 18m et un angle de
couverture de 90° garantissent une protection optimale
contre les déclenchements intempestifs.
Le IR1000 est équipé d’un régulateur de portée avec
lequel il est possible de règler la sensibilité de 3 à 18 m et
d’un comptage d’impulsion avec une fenêtre de temps
de 5” activable dans les cas où est requise une haute
protection contre les déclenchements intempestifs.
La mécanique a été réalisée de telle façon à ne pas
utiliser de vis pour la fixation de la platine électronique
à l’intérieur du détecteur et pour l’ouverture du capot du
IR1000.
2 INSTALLATION
Pour l’installation, ouvrir le détecteur en pressant sur
le petit clip se trouvant dans la partie inférieure à l’aide
d’un petit tournevis (voir figure 1) puis déclipser la
platine électronique (voir figure 2).
Défoncer les pré-percements ou utiliser une rotule
suivant le type d’installation puis faire sortir le cable de
raccordement dans la partie supérieure et fixer le fond.
NB: pendant la fermeture du détecteur, faire attention
que le ressort du contact du compensateur se
positionne correctement dans le siège conique sur
la façade du compensateur même.
3 CABLAGE ET REGLAGE
Cabler le détecteur en respectant la polarité (voir fig 3).
Il est possible de désactiver la LED de test en activant
l’entrée B/S par une tension (voir fig 3).
Sélection du comptage d’impulsion grâce au jumper
JP1(voir fig 4) Ouvert = 1 impulsion; Fermé = 2 impulsions
de 5”. Pour le réglage de la portée de l’infrarouge de 3
m à 18 m, procéder comme suit :
- Mettre le potentiomètre “COVERAGE” au minimum
(sens anti horaire) puis augmenter celui-ci (sens horaire)
pas à pas afin d’obtenir la portée desirée.
1. INTRODUCCIÓN
IR1000 es un sensor de infrarrojo de tipo digital con
microcontrolador y con lente antirasguños. Gracias a un
innovador sistema de captación y elaboración numérica
de la señal procedente del piroeléctrico (2 elementos)
tiene una cobertura de más de 18 m de largo y más de
90º de ancho, garantizando una seguridad total contra
las falsas alarmas.
Está dotado de un regulador de alcance con el que
se puede regular la sensibilidad de 3 a 18m. Tiene un
contador de doble impulso con ventana de tiempo de 5”
que puede activarse donde sea necesaria una protección
mayor contra las falsas alarmas. La mecánica está
realizada de forma que no se utilicen tornillos tanto para
fijar la tarjeta dentro del contenedor como para abrir el
sensor.
Para acceder a la tarjeta electrónica será suficiente
pulsar la tecla del fondo del contenedor (véase la figura
1) y haciendo palanca en las placas de ABS se podrá
extraer la tarjeta electrónica y trabajar con total libertad.
2. INSTALACIÓN
- Utilizando una herramienta fina (por ejemplo un
destornillador de corte pequeño), empuje la tecla
redonda de la parte delantera y abra el contenedor.
- Quite la tarjeta electrónica del fondo del contenedor
haciendo palanca en el clip del lado de los bornes
(figura 2).
- Perfore los ajustes específicos que quiera utilizar para la
fijación o utilice la articulación correspondiente.
-
La altura del suelo aconsejada para la fijación es de
2m - 2,30m.
- Deslice el cable de conexión por la guía correspondiente
de la parte trasera del contenedor y haga que salga por
el orificio superior.
Nota: En fase de cierre del detector preste atención
para que el muelle de contacto tamper se coloque
correctamente en la sede cónica de la parte
delantera.
3. CONEXIÓN Y REGULACIÓN
Por lo que respecta a la conexión a la central consulte
el esquema 3.
- Para desactivar por completo el LED WALK TEST hay
que suministrar una tensión de 13,8 VDC fija al borne
B/S y por el contrario si se quiere desactivar sólo con
el sistema desconectado, siga las instrucciones del
esquema de conexión de la figura 3.
- Con el JUMPER 1 se puede configurar el sensor para
que dé la alarma con 1 o 2 detecciones (JP1 ABIERTO =
1 impulso, CERRADO = 2 impulsos en 5”).
- Se puede regular el alcance de 3 a 18 m (normalmente
si el uso es residencial con locales protegidos que
no son excesivamente grandes se aconseja regular
el trimmer a la mitad).
ESPAÑOL
3
Premere qui per aprire
Press here to open
Led WALK TEST
Lente / Lens
Sfondabili per fissaggio
Mounting knockouts
Fissaggio circuito
Clip for electronic board
CENTRALE
CONTROL PANNEL
24H 13.8VDC
-+
OPEN
COLLECTOR
ARM/DISARM
ALARM
CONTACT
TAMPER SUPPLY B/S N.C.
TAMPER ALLARME
ALARM
ALIMENTAZIONE
SUPPLY
13.8
STOP
WALK
TEST
1K
N.O. 1 count
N.C. 2 count
COVERAGE
From 3 mt
to 18 mt
0°
10°
20°
30°
40°
45°
10°
20°
30°
40°
45°
15mt
6mt 12mt
0°
10°
20°
30°
40°
45°
10°
20°
30°
40°
45°
15mt
6mt 12mt
1. Vista generale - General View
Vue générale - Vista general 2. Vista interna - Inside View
Vue intérieur - Vista interior
3. Morsettiera - Terminals
Plaque a bornes - Tablero de bornes 4. Scheda - Board - Fiche - Tarjeta
5. LENTE - LENS - LENTILLE - LENTE
4
SPECIFICHE TECNICHE - TECHNICAL SPECIFICATIONS
SPECIFICATIONS TECHNIQUES - ESPECIFICACIONES TÉCNICAS
IR1000
Alimentazione / Input Voltage / Alimentation / Alimentaciòn 9 to 15 Vdc
Consumo / Current Drain / Consommation / Consumo 10 mA @ 13.8 Vdc
Portata in lunghezza / Coverage / Portee / Longitud de alcance from 3 to 18 m
Portata in larghezza / Angle / Angle de couverture / Anchura de alcance 90°
Piroelettrico / PIR / Pyroelettrique / Piroeléctrico 2 elementi / 2 elements
Lente / Lens / Lentille / Lente (haces y niveles) 31 patterns on 5 levels
Compesazione termica / Thermical compesation / Compensation thermique
Compensación térmica
¸
Antiapertura / Anti-opening / Autoprotection / Antiapertura ¸
Antistrisciamento / Creep zone / Detection sous le detectour / Antirasguños ¸
Contatto di allarme / Alarm contact / Contact d’alarme / Contacto de alarma max 100 mA - 40 Vdc - 16 Ω
Contatto di tamper / Tamper switch / Contatct d’auto-protection / Contacto de tamper max 40 mA - 30 Vdc
Contatore impulsi / Event counter / Comptage d’impulsion / Contador impulsos 2 count. for 5 sec. (selectable)
Temperatura di esercizio / Operating temperature / Temperature de fonctionnement / Temperatura de
funcionamiento
from - +5 °C to +40 °C
Temperatura di stoccaggio / Storage temperature / Temperature de stockage / Temperatura de
almacenamiento
from -20 °C to 60 °C
RFI Protezione / Protection / Protection / RFI Protección 10 V / m (20 MHz - 1000 MHz)
Led WALK TEST ¸
WALK TEST Ingresso / Input / entreé / Entrada ¸
Contenitore / Housing / Boiter / Contenedor ABS
Accessorio incluso / Accessory included / Accessoire inclus / Accesorio incluido snodo orientabile / Swivel bracket / Rotule
orientable / Articulación orientable
Dimensioni / Dimensions / Medidas 110 x 60 x 46 mm
Il sensore IR1000 è conforme ai requisiti della norma CEI 79-2:1998+AB:2000 (1°livello).
Il simbolo CE applicato sul prodotto garantisce la sua conformità ai requisiti essenziali della Direttiva Europea 89/336/EEC (EMC-Compatibilità Elettro-
magnetica). Il prodotto è quindi conforme alle seguenti norme armonizzate:
EN 50130-4 - EN 55022.
L’installazione deve essere eseguita a regola d’arte da personale specializzato.
Il produttore declina ogni responsabilità nel caso in cui il prodotto venga manomesso da persone non autorizzate.
Si raccomanda di verificare il corretto funzionamento del sistema d’allarme almeno una volta al mese, tuttavia un sistema di allarme elettronico affidabile
non evita intrusioni, rapine, incendi o altro, ma si limita a diminuire il rischio che tali situazioni si verifichino.
The CE symbol on the product guarantees it is in conformity with the essential requisites of the 89/336/EEC (EMC-Electromagnetic compatibility) Euro-
pean Directive. Therefore the product is in conformity with the following harmonized regulations : EN 50130-4 - EN 55022.
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and due to, but not limited to, any
or all of the following: tampering, electrical or communication disruption or improper use, it is possible for the product/system to fail to prevent burglary,
rubbery, fire or otherwise. A properly installed and maintained alarm system can only reduce the risk that this happens.
Le symbole CE appliqué sur le produit assure la conformité aux conditions requises par la Directive Européennes 89/336/EEC (EMC-Compatibilité
Electromagnétique). Le produit est donc conforme aux normes harmonisées suivantes:
EN 50130-4 - EN 55022.
L’installation doit ètre effectuée dans les règles de l’art par un installateur qualifié.
Le fabricant décline toute responsabilité en cas d’utilisation des produits par des personnes non habilitées.
Il est recommandé de vérifier le bon fonctionnement du système d’alarme au moins une fois par mois.
Un système d’alarme électronique n’exclut pas le risque d’intrusion, de vol, d’incendie mais limite et diminue fortement celui-ci . Par la présente Fra-
carro Radioindustrie SpA déclare que l’appareil IR1000 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
El símbolo CE del producto garantiza su conformidad con los requisitos esenciales de la Directiva Europea 89/336/EEC (EMC-Compatibilidad Electro-
magnética). Por tanto el producto cumple las siguientes normas armonizadas:
EN 50130-4 - EN 55022.
La instalación debe realizarla perfectamente personal especializado.
El fabricante declina toda responsabilidad en caso de que el producto sea alterado por personas no autorizadas.
Se recomienda comprobar el correcto funcionamiento del sistema de alarma al menos una vez al mes; por otro lado un sistema de alarma electrónico
fiable no evita intrusiones, robos, incendios, etc. sino que se limita a disminuir el riesgo de que dichas situaciones se produzcan.
FRACARRO RADIOINDUSTRIE S.p.A. – Via Cazzaro, 3 – 31033 CASTELFRANCO V. (TV)
Tel. 0423.7361, Fax 0423.736220 - E-Mail: infosic@fracarro.com – Sito WEB: www.fracarro.com
IR1000 rev.2 19/10/2007

Other Fracarro Security Sensor manuals

Fracarro TEATROB-WL User manual

Fracarro

Fracarro TEATROB-WL User manual

Fracarro WL04IR User manual

Fracarro

Fracarro WL04IR User manual

Fracarro SHIELD V User manual

Fracarro

Fracarro SHIELD V User manual

Fracarro TEATRO' 35DT EVO User manual

Fracarro

Fracarro TEATRO' 35DT EVO User manual

Fracarro SHIELD C User manual

Fracarro

Fracarro SHIELD C User manual

Fracarro SEL80LED User manual

Fracarro

Fracarro SEL80LED User manual

Fracarro SEL-WL User manual

Fracarro

Fracarro SEL-WL User manual

Fracarro IR1000 EVO User manual

Fracarro

Fracarro IR1000 EVO User manual

Fracarro DT1000AM User manual

Fracarro

Fracarro DT1000AM User manual

Fracarro TEATRO'35 EVO User manual

Fracarro

Fracarro TEATRO'35 EVO User manual

Fracarro DT1000 User manual

Fracarro

Fracarro DT1000 User manual

Fracarro IR900 User manual

Fracarro

Fracarro IR900 User manual

Popular Security Sensor manuals by other brands

Hytronik HMW31 Installation and instruction manual

Hytronik

Hytronik HMW31 Installation and instruction manual

Vicon V1400X-VLD instruction manual

Vicon

Vicon V1400X-VLD instruction manual

Optex FX-50QZ installation instructions

Optex

Optex FX-50QZ installation instructions

ORBILOC OUTDOOR DUAL user guide

ORBILOC

ORBILOC OUTDOOR DUAL user guide

Sanwa KD2 instruction manual

Sanwa

Sanwa KD2 instruction manual

ADEMCO 1875EX installation instructions

ADEMCO

ADEMCO 1875EX installation instructions

Orno OR-CR-220 quick start guide

Orno

Orno OR-CR-220 quick start guide

Simon XTi quick guide

Simon

Simon XTi quick guide

Leviton decora OSSMT-M3 installation instructions

Leviton

Leviton decora OSSMT-M3 installation instructions

Edwards SIGA-HRD Installation sheet

Edwards

Edwards SIGA-HRD Installation sheet

LG 17HQ701G-BP.AEU owner's manual

LG

LG 17HQ701G-BP.AEU owner's manual

Conrad Electronic FS20 PIRI operating instructions

Conrad Electronic

Conrad Electronic FS20 PIRI operating instructions

Det-Tronics HD instructions

Det-Tronics

Det-Tronics HD instructions

GREEN INSTRUMENTS G26 manual

GREEN INSTRUMENTS

GREEN INSTRUMENTS G26 manual

Redwall Redscan RLS-3060L installation instructions

Redwall Redscan

Redwall Redscan RLS-3060L installation instructions

SGB DLR-G Documentation

SGB

SGB DLR-G Documentation

iPROTECT 1205 quick start guide

iPROTECT

iPROTECT 1205 quick start guide

Menlo Systems FPD310-FV operating manual

Menlo Systems

Menlo Systems FPD310-FV operating manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.