Franklin DMQ-570 User manual

DMQ-570
Collins English
Dictionary
Paperback Edition
& Thesaurus
User’s Guide
www.franklin.com

License Agreement
READ THIS LICENSE AGREEMENT
BEFORE USING THE ELECTRONIC
REFERENCE. YOUR USE OF THE
ELECTRONIC REFERENCE DEEMS
THAT YOU ACCEPT THE TERMS OF
THIS LICENSE. IF YOU DO NOT AGREE
WITH THESE TERMS, YOU MAY
RETURN THIS PACKAGE WITH
PURCHASE RECEIPT TO THE DEALER
FROM WHICH YOU PURCHASED THE
ELECTRONIC REFERENCE AND YOUR
PURCHASE PRICE WILL BE
REFUNDED. ELECTRONIC
REFERENCE means the software
product and documentation found in this
package and FRANKLIN means Franklin
Electronic Publishers, Inc.
Limited Use License
All rights in the ELECTRONIC
REFERENCE remain the property of
FRANKLIN. Through your purchase,
FRANKLIN grants you a personal and
nonexclusive license to use this

ELECTRONIC REFERENCE. You may
not make any copies of the ELECTRONIC
REFERENCE or of the data stored
therein at the time of purchase, whether in
electronic or print format. Such copying
would be in violation of applicable
copyright laws. Further, you may not
modify, adapt, disassemble, decompile,
translate, create derivative works of, or in
any way reverse engineer the
ELECTRONIC REFERENCE. You may
not export or reexport, directly or
indirectly, the ELECTRONIC
REFERENCE without compliance with
appropriate governmental regulations.
The ELECTRONIC REFERENCE
contains Franklin’s confidential and
proprietary information which you agree to
take adequate steps to protect from
unauthorized disclosure or use. This
license is effective until terminated by
Franklin. This license terminates
immediately without notice from
FRANKLIN if you fail to comply with any
provision of this license.

Introduction
Welcome to the world of Franklin.
Thank you for purchasing the DMQ-
570 which is a powerful, portable,
electronic reference book. With your
new Collins English Dictionary
Paperback Edition & Thesaurus, you
can...
• look up thousands of words,
phrases and definitions
• find synonyms, antonyms and
Classmates™
• look up Confusables™
• use the three solvers to find
possible crossword answers when
you know only a few letters

• play eight fun word games
• save words for study in My Word
List
• store names and numbers in the
databank
• use the handy clock, calculator
and metric and currency
converters

Key Guide
Function Keys
Goes to the word entry
screen or displays the
dictionary entry for a word.
Goes to the word entry
screen or displays the
thesaurus entry for a
word. In word lists where
THES flashes, displays the
thesaurus entry.
Goes to the Solvers
menu.
Goes to the Games
menu.
Goes to your user list
menu.
Turns your device on or
off.

Returns to your previous
location or erases a letter.
Shifts to type capital
letters.
Displays a help message.
At the word entry screen
and crossword solver,
types a ? to stand for a
single letter in a word. In
games, gives up. At the
word entry screen, hold
CAP and then press ?to
type an ✽to stand for a
series of letters. In word
lists, dictionary entries, or
thesaurus entries where
CONF flashes, displays
Confusables.
Types a space. In games,
gives a hint.

Clears to the start of the
selected mode.
Goes to the main menu,
where you can set the
contrast, type size and
shutoff time, view the
demo and tutorial, and
access the databank,
calculator, metric and
currency converters,
abbreviations list and
clock.
Enters words or numbers
or selects items.

Navigation Button
At the word entry screen,
moves the cursor left ( )
or right ( ). In thesaurus
entries, press to go to
the next entry or to go
to the previous entry, if
any. At the word entry
screen, press up ( ) to
add an accent to a letter.
In a menu, press to
scroll up a list. In a menu,
press down ( ) to scroll
down a list.

Calculator Keys
Q–P Types numbers.
A(1/x) Calculates a reciprocal.
S(√x) Calculates a square root.
D(x2)Squares a number.
F(%) Calculates a percentage.
G(.) Inserts a decimal point.
H(+),J(-) Adds, subtracts, multiplies
or divides numbers.
Z(+/-) Changes the number on
the screen to a negative
or positive number.
X(M+) Adds the number on the
screen to the number
stored in memory.
C(M–) Subtracts the number on
the screen from the
number stored in memory.
V(MR)Recalls the number
stored in memory.
B(MC)Clears the memory.
K(x),L(÷)

For Your Information
✓Viewing the Demo
When you first use this product
you will see a demonstration of
what it can do. To stop the demo,
press any key. To disable or re-
enable the demo, first press DICT
or THES to go to the word entry
screen, then type
✽✽ dand press
ENTER. To view the demo at any
time, press MENU, press until
you see Demo and then press
ENTER.

✓Help is Always at Hand
You can view a help message at
any screen by pressing HELP.
Use the direction keys to read the
message. To exit help, press
BACK. To read a tutorial
describing how to use this device,
press MENU, press until you
see Tutorial and then press
ENTER.
✓Follow the Arrows
The flashing arrows show which
arrow keys you can press to move
around menus or view more text.

Getting Started
The DMQ-570 uses two CR2032
Lithium batteries that come pre-
installed. Turn the device over and
gently pull the battery insulation
sheet to remove it.
Press to turn the product on.
Use a paper clip to gently press the
RESET button on the back of the
device. For more information, please
see “Resetting your Device”.
Warning! Pressing the reset button
with more than light pressure may
permanently disable your unit. In
addition, resetting the unit may erase
settings and information you may
have entered.

Replacing the Batteries
The batteries should be changed
when you see a low battery warning.
Please have 2 new CR-2032
batteries and a small Phillips
screwdriver at hand before you follow
the steps below.
Warning! If the batteries wear out
completely, or if you take more than
a few seconds while changing the
batteries, any user-entered
information may be erased. You
should always keep written copies of
your important information.
1. Turn the unit off and turn it
over.
2. Use the Phillips screwdriver to
unscrew the battery cover
screw.
3. Push gently on the tab of the
battery cover and remove it.

4. Remove the old batteries.
Note: Use a paper clip if
necessary to remove the old
batteries.
5. Install 2 new CR-2032 lithium
batteries in their place with
positive polarity facing up.
Important: Be sure that the
batteries are installed correctly.
Wrong polarity may damage the
unit.
6. Replace the battery cover and
secure it with the screw.
Battery disposal: Do not dispose of
batteries with normal household
waste. Please obey your local
regulations when disposing of used
batteries.

Battery Precautions
• Non-rechargeable batteries are
not to be re-charged. Never
recharge batteries that come with
the device.
• Rechargeable batteries are to be
removed from the device before
being charged.
• Rechargeable batteries are only to
be charged under adult
supervision.
• Only batteries of the same or
equivalent type as recommended
are to be used.
• The supply terminals are not to be
short-circuited.
• Do not expose batteries to direct
heat or try to take batteries apart.
Follow the battery manufacturer’s
instructions for battery use.

• Always remove a weak or dead
battery from the device.
• To avoid damage caused by
leakage of the battery fluid,
replace the battery or batteries
once every two years regardless
of how much the device has been
used during that time.
• Should a battery leak, the device
may become damaged. Clean the
battery compartment immediately,
avoiding contact with your skin.
• Keep batteries out of reach of
small children. If swallowed,
consult a physician immediately.

Setting the Clock
The clock lets you set a Home Time
and view local times around the
world. You must set the Home Time
before viewing World Times as World
Times are based on Home Time.
Setting Home Time
1. Press MENU.
2. Press or to highlight Clock
and then press ENTER.
You see the Home Time screen.
3. Press S to enter the setting
mode.
4. Press ENTER to select Set Time
Format.
Press or to cycle through the
12- and 24-hour Day/Month/Year
formats.

Press ENTER to save your
selection.
5. Press to highlight Set DST
and press ENTER to select it.
Press or to cycle between
DST On or DST Off. Press
ENTER to select your choice.
6. Press to highlight Set Time
and press ENTER to select it.
Press or until the current
hour is displayed.
Press to move to minutes, then
press or until the current
minute is displayed.
Press ENTER to set the time.
7. Press to highlight Set Date
and press ENTER to select it.

Use or to move to the next or
previous field. Use or to
scroll to the current
day/month/year. Press ENTER to
set it.
7. Press to highlight Set Home
City and press ENTER to select
it.
Press or until your local city
is displayed. Press ENTER to
select it. Note: To see a list of
available cities, see the appendix
at the end of this User’s Guide.
8. Press BACK to exit setting
mode.
Setting World Time
1. Press MENU.
2. Press or to highlight Clock
and then press ENTER.