Frico IH User manual

IH
Original instructions
.... 7
EN .... 10 SE .... 13 NO .... 16 FR .... 20 DE
.... 24
ES .... 28 NL .... 32 IT .... 36 PL .... 40 RU
.... 44
FI

IH
2
Introduktionssidorna består huvudsakligen av bilder. För översättning av de engelska
texter som används, se respektive språksidor.
SE
The introduction pages consist mainly of pictures. For translation of the English texts
used, see the respective language pages.
EN
Introduksjonssidene består hovedsakelig av bilder. For oversettelse av de engelske
tekstene, se de respektive språksidene.
NO
Les pages de présentation contiennent principalement des images. Consulter la
page correspondant à la langue souhaitée.
FR
Die Einleitungsseiten bestehen hauptsächlich aus Bildern. Für die Übersetzung der
verwendetenTexte in englischer Sprache, siehe die entsprechenden Sprachseiten.
DE
Las páginas introductorias contienen básicamente imágenes. Consulte la
traducción de los textos en inglés que las acompañan en las páginas del idioma
correspondiente.
ES
De inleidende pagina's bevatten hoofdzakelijk afbeeldingen. Voor een vertaling van
de gebruikte Engelse teksten, zie de pagina's van de resp. taal.
NL
Le pagine introduttive contengono prevalentemente immagini. Per le traduzioni dei
testi scritti in inglese, vedere le pagine nelle diverse lingue.
IT
Początkowe strony zawierają głównie rysunki. Tłumaczenie wykorzystanych tekstów
angielskich znajduje się na odpowiednich stronach językowych.
PL
Esittelysivut koostuvat lähinnä kuvista. Suvuilla olevien enlanninkielisten sanojen
käännökset löytyvät ko. kielisivuilta.
FI
RU Страницы в начале Инструкции состоят в основном из рисунков, схем и таблиц.
Перевод встречающегося там текста приведен в разделе RU.

IH
3
500/676
169
160
0,9
77
147
Positioning
Fig.1:The heaters should heat from at least two
directions for even heating
46,5
60
11 524
ø8
17,5
25,5
35
Dimensions
2,3–3,5 m
1,8–2,5 m
Installation height
Wallbracket

IH
4
1
33
4
5
2
1
Replacing the lamp
Minimum mounting distance
200 180
min 30°
1800
300
1000
160
500
IHE
ceiling
bracket
Flammable
material

IH
5
Accessories
11884 IHUB*
18050 IHE
16975 IHXH*
16976 IHXL*
11887 IHT*
16974 IHTW*
16970 IHP*
92865 KLS1KS
93272 IHAF
220646 IHL1000
220647 IHL1500
206496 IHL2000
KLS1KS IHAF
IHUB IHXH IHXL
IHT+IHTW
IHE
IHP IHP+IHTIHL
Controls
92867 IHBD3*
10740 CBT
IHBD3 CBT
IHT
*) See separate manual.
*) See separate manual.

IH
6
Infrared heater IHW with wide heat distribution (IP44)
Item
number
Type Heat
output
[W]
Voltage
[V]
Amperage
[A]
Max. filament
temperature
[°C]
Length
[mm]
Weight
[kg]
11878 IHW10 1000 230V~ 4,3 2200 500 1,9
11879 IHW15 1500 230V~ 6,5 2200 500 1,9
11880 IHW20 2000 230V~ 8,7 2200 676 2,5
Infrared heater IHF with directed heat distribution (IP44)
Item
number
Type Heat
output
[W]
Voltage
[V]
Amperage
[A]
Max. filament
temperature
[°C]
Length
[mm]
Weight
[kg]
11881 IHF10 1000 230V~ 4,3 2200 500 1,9
11882 IHF15 1500 230V~ 6,5 2200 500 1,9
11883 IHF20 2000 230V~ 8,7 2200 676 2,5
Wiring diagrams
Timer control
Timer control with contactor
N
IH/IHC
123
CBT
LN
LN
IH/IHC
LN
IH/IHC
L
230V~
Max load 3500W
N
IH/IHC
123
CBT
230V~
LN
LN
IH/IHC
LN
IH/IHC
L
L1
L2
L3
N
L
N
400V3~
Technical specifications

IH
7
EN
Installation and operating instructions
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application
The infrared heater IH is powerful with a
high filament temperature of 2200 °C and
is the perfect choice for exposed outdoor
environments where design is important. IH
is available in two different designs. IHW gives
a comfortable heat in the occupied zone from
close range and also wider heat distribution.
IHF has more direct heat distribution and is
designed to be installed higher up.
Protection class: IP44.
Positioning
The heaters must be placed so that they
cover the area to be heated, see fig. 1. The
normal mounting height is 2–3 metres above
the ground/floor. A rule of thumb for infrared
heaters is that 600–800 W/m² increases the
experienced temperature by about 10 °C. The
output demand can be reduced if the area to
be heated is protected. If the area only has a
roof, at least 800 W/m² should be installed.
600 W/m² is sufficient if the area has three
walls. For enclosed areas, the output demand
must be calculated. Optimum comfort is
achieved if the heat is distributed from at
least two directions.
IHW provides wide heat distribution (60°),
recommended installation height 1.8 – 2.5 m.
IHF provides directed heat distribution (40°),
recommended installation height 2.3 – 3.5 m.
Start-up
When the unit is used for the first time or
after a long period of disuse, smoke or odour
may result from dust or dirt that has collected
on the element. This is completely normal
and disappears after a short time.
Mounting
IH is installed horizontally on walls with
supplied bracket. The heater can be angled
up to 45°. The heater can also be mounted
on e.g. a parasol or a post, a suitable U-bolt
(not included) is used for this together with
the supplied console. For ceiling installation
use ceiling bracket IHE (accessory). For other
mounting alternatives, see accessories.
For minimum distances, see diagrams on
introductory pages.
1.Secure the bracket on the wall with at least
2 screws. If the keyhole slots are used, an
addition screw is needed to fix the bracket.
See the introduction pages.
2.Remove the screws fixed to the unit's back
on delivery.
3.Hook the unit on the bracket.
4.Lock in position with the screws.
Connection
IH is equipped with a 0.9 metre cord with
plug for connection to an earthed outlet
socket.
The connection cord must not rest against
the unit as the surface becomes hot or can
be hit by thermal radiation. Contact an
electrician if the cord needs to be changed.
Note that due to the high temperatures in the
heater, a cord of the type H05 RN-F 3G1 mm²
or the like should be used.
As the halogen lamp has a high starting
current the wall socket should be fuse
protected by a slow burn fuse.
In the event of uncertainty contact an
electrician.

IH
8
EN
Maintenance
The power supply to the unit must be
disconnected during all service, repair and
maintenance work.
The unit has no moving parts so the
maintenance requirement is small, but it
must be kept clean and free from dust and
dirt. If the reflector is not clean the thermal
radiation from the unit will decrease and the
heater will become hotter. A large amount of
dirt can cause overheating.
The surface of the reflector is sensitive and
must be cleaned with care. If the reflector
is dirty it must be cleaned or replaced by a
specialist.
Replacing the lamp
The heat lamp is of the highest quality and
unless it is subjected to mechanical strains in
the form of vibrations and impact it will last
for a long time. The service life is dependent
on the ambient temperature and how the
heater is installed. When the heater is
installed freely and outdoors the temperature
will be low and the life of the lamp can be
expected to be in the region of 3000 hours.
The lamp must be replaced by an installer
or other skilled person.
1.Disconnect the power supply.
2.Wait until the unit is cold.
3.Remove the covers at both ends (four
screws).
4.Pull the grille to one side.
5.Remove both reflector ends (two screws).
6.Loosen the connections on the terminal
block.
7.Pull the lamp out of the lamp holders.
8.Check that the replacement lamp has the
correct output and voltage.
9.Fit the new lamp. Note do not touch the
lamp with your fingers, wear gloves or the
like.
10.The protective tube must be refitted to the
cables, so that the cables are not damaged
when the grille is fitted.
11.Reassemble the unit again.
See the introduction pages.
Residual current circuit breaker
When the installation is protected by means
of a residual current circuit breaker, which
trips when the appliance is connected,
this may be due to moisture in the heating
element. When an appliance containing a
heater element has not been used for a long
period or stored in a damp environment,
moisture can enter the element.
This should not be seen as a fault, but is
simply rectified by connecting the appliance
to the main supply via a socket without a
safety cut-out, so that the moisture can be
eliminated from the element. The drying
time can vary from a few hours to a few days.
As a preventive measure, the unit should
occasionally be run for a short time when it is
not being used for extended periods of time.
Packaging
Packaging materials are chosen with
consideration to environment and are
therefore recyclable.
Handling of product at end of working life
This product may contain substances
necessary for functionality of product but
potentially dangerous for the environment.
The product should not be disposed
mixed with general household waste but
delivered to a designated collection point for
environmental recycling. Please contact local
authority for further details of your nearest
designated collection point.

IH
9
EN
Safety
• For all installations of electrically heated
products should a residual current circuit
breaker 300 mA for fire protection be used.
• The unit must not be fully or partially
covered as overheating can result in a fire
risk!
• The unit must not be placed directly under
fixed wall sockets!
• The unit must not be used if the unit or the
cord is damaged. Risk of injury!
• The heater is equipped with a protective
grille to prevent contact or to prevent
large objects from touching the hot lamp.
The unit must not be used without this
protective grille.
• The cable and plug must not be placed
inside the hot radiant area.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made by
children without supervision.
• Children of less than 3 years should be kept
away unless continuously supervised.
• Children aged from 3 years and less than 8
years shall only switch on/off the appliance
provided that it has been placed or
installed in its intended normal operating
position and they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
• Children aged from 3 years and less
than 8 years shall not plug in, regulate
and clean the appliance or perform user
maintenance.
CAUTION — Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.

Art no: 206500, 2020-04-20 HH/CH
Main office
Frico AB Tel: [phone]
Industrivägen 41
SE-433 61 Sävedalen [email protected]
Sweden www.frico.net
For latest updated information and information
about your local contact: www.frico.net.