Frico ADCS User manual

AD Corinte W - ADCS
...16
SE
...46
IT
...28
RU
...22
NO ...25 FR
...34
NL ...37 ES ...43 FI
...19
GB
...40
PL
...31
DE
...49
DK

AD Corinte W - ADCS
2
M8 M8
Cu ø22
VL - A
VL - B
VR - A
VR - B
Min 180
225
125
72
116
Min 180
225
125
72
116
Doorway
Wall
Wall
Top
Bottom (seen from above)
Top
Bottom (seen from above)
Fig 1

AD Corinte W - ADCS
3
1
2
80
60
1
2
60
80
3
Ø22 Cu
PH2 / 1/4”
Fig 2 Fig 3
Ø22 Cu
2200/2450
500 350

AD Corinte W - ADCS
4
12
3
4
5
6
78
9
10
A
B
C
Fig 4

AD Corinte W - ADCS
5
Fig 5

AD Corinte W - ADCS
6
100 126
1700/2200
1670/2170
75
Cu ø22 Cu ø22
Min 180 mm
50
75
376
Min 180 mm
Fig 6a
Fig 6b
Left connection Right connection
Wall

AD Corinte W - ADCS
7
Fig 6c Fig 6d
360
243
Ø22
Ø10
15
5
10
Fig 7
80 35
ø1
2
180
35
25
40

AD Corinte W - ADCS
8
A
B C
A
C
B
ADCEH
Ø8 for securing at the air curtain.*2
2 alternatives for securing at the
top.*1
Ø8
Ø12 (2x) }
SE / NO / FR / RU / DE / NL / ES / PL / FI / IT / DK
*1) 2 alt. för stagning i toppen. / 2 muligheter for
montering på toppen. / 2 possibilités de fixation par le
haut. / 2 варианта крепления верхней части / Zwei Be-
festigungsmöglichkeiten an der Oberseite / 2 alterna-
tieven voor bevestiging aan de bovenkant. / 2 opcio-
nes de sujeción a la parte superior. / 2 opcje montażu w
części górnej. / 2 vaihtoehtoista kiinnitystapaa. /
2 alternative per il montaggio sulla parte superiore. /
2 alternativer til fastgørelse foroven.
*2) Ø8 för stagning i luftridån. / Ø8 for montering
på luftporten. / Ø8 pour fixation du rideau d’air. /
Для крепления к завесе / Ø 8 zur Befestigung am
Luftschleier / Ø8 voor bevestiging aan het lucht-
gordijn. / Ø8 para sujeción a la cortina de aire. / Ø8 do
zamocowania kurtyny powietrznej. / Ø8 ilmaverhoko-
jeen kiinnitykseen. / Ø8 per il montaggio sulla barriera
d’aria. / Ø8 til fastgørelse af lufttæppet.

AD Corinte W - ADCS
9
ADCS - SIRe
Fig 8
SIRe

AD Corinte W - ADCS
10
SIReB
SIReAC
SIReAA
SIReRTX 70x33x23 mm
SIReUR 114x70x50 mm
SIReWTA
SIReCJ4
SIReCJ6
SIReCC603 3 m
SIReCC605 5 m
SIReCC610 10 m
SIReCC615 15 m
SIReCC640 40 m
SIReCC403 3 m
SIReCC405 5 m
SIReCC410 10 m
SIReCC415 15
SIRe
C
SIReB
SIReAC/SIReAA
SIReRTX
SIReUR
SIReWTA
SIReCC
SIReCJ4/SIReCJ6
VKF
SDM24 ST23024
SD230 BPV10
VKF
VLSP
VLP
Type RSK-nr
(SE)
NRF-nr
(NO)
Connection
VLSP15LF
670 45 35
DN15
VLSP15NF
670 45 36
850 26 36 DN15
VLSP20
670 45 37
850 26 37 DN20
VLSP25
670 45 38
850 26 38 DN25
VLSP32
670 45 39
850 26 39 DN32
VLP15LF
670 45 30
673 09 47 DN15
VLP15NF
670 45 31
850 26 31 DN15
VLP20
670 45 32
850 26 32 DN20
VLP25
670 45 33
850 26 33 DN25
VLP32
670 45 34
850 26 34 DN32

AD Corinte W - ADCS
11
Wiring diagrams
Internal wiring diagram
ADCS W 230V~
SIReB1
230V~
Actuator
230V~
Transformer
230V
200V
170V
145V
120V
100V
N
Black
Blue
Supply
230V~
C2 C1 ROOM
Internal
sensor
Motor
protection
Transformer
230V
200V
170V
145V
120V
100V
N
Yellow
Orange
Red
Brown
Black
Green
Blue
LN

AD Corinte W - ADCS
12
Wiring diagrams
SIRe B Basic
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATORSUPPLY
N L NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATORSUPPLY
N L NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATORSUPPLY
N L NL
PE
L
~
230V~
SIReCC6XX (max 50 m)
SIReB1/B2/B1EC
SIReB1/B2/B1EC
SIReB1/B2/B1EC
SIReCC6XX
(max 50 m)
SIReCC6XX
(max 50 m)
SIReUB1
SIReRTX
(optional)
SD230
SD230
SD230
L=1,5m
L=2m
Wiring diagrams for SIReAC Competent and SIReAA Advanced, see manuals for SIRe.

AD Corinte W - ADCS
13
Supply water temperature: 82 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 82/71 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WH max 3200 19,0 42 0,12 1,4 30,8 46,2 0,69 32,6
min 1500 8,8 35 0,05 0,3 18,5 54,1 0,41 12,9
ADCS22WH max 4400 26,2 42 0,16 3,1 40,5 45 0,90 66,6
min 2100 12,2 33 0,06 0,6 25,1 53 0,56 27,8
ADCS25WH max 5000 28,4 38 0,16 3,4 47,5 45,8 1,06 97,6
min 2400 13,7 31 0,06 0,7 29,2 53,6 0,65 40,2
Supply water temperature: 110 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 110/80 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WH max 3200 18,7 36 0,06 0,5 39,6 54,2 0,33 8
min 1500 9,3 35 0,03 0,1 24 64,9 0,20 3,3
ADCS22WH max 4400 24,8 33 0,08 0,9 52,4 52,9 0,43 16,5
min 2100 12,0 29 0,04 0,2 32,7 63,6 0,27 7, 1
ADCS25WH max 5000 28,7 32 0,09 1,2 61,6 54,1 0,51 24,3
min 2400 13,6 27 0,04 0,3 38,2 64,6 0,31 10,3
Supply water temperature: 90 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 90/70 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WH max 3200 18,1 39 0,09 0,8 32 47,3 0,39 11,7
min 1500 8,7 35 0,04 0,2 19,3 55,8 0,24 4,7
ADCS22WH max 4400 25,5 39 0,12 1,9 42,3 46,2 0,52 24,1
min 2100 12,0 31 0,05 0,4 26,3 54,7 0,32 10,2
ADCS25WH max 5000 28,8 36 0,13 2,4 49,7 47,1 0,61 35,4
min 2400 14,2 30 0,06 0,6 30,7 55,5 0,38 14,9
Supply water temperature: 80 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 80/60 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WH max 3200 18,7 42 0,12 1,5 26,3 42,1 0,32 8,5
min 1500 8,7 35 0,05 0,3 16 49,2 0,20 3,5
ADCS22WH max 4400 25,8 42 0,17 3,4 35 41,3 0,43 1 7, 5
min 2100 12,0 33 0,06 0,6 21,8 48,4 0,27 7, 5
ADCS25WH max 5000 29,3 40 0,18 4,3 41,2 42,1 0,50 25,7
min 2400 14,0 32 0,07 0,8 25,5 49,1 0,31 10,9
ADCS WH
*1) Recommended outlet air temperature for good comfort and optimized output.
*2) Nominal output at given supply and return water temperature.

AD Corinte W - ADCS
14
ADCS WL
Supply water temperature: 80 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 80/60 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WL max 3200 18,3 33 0,09 0,9 35,8 50,8 0,44 12,6
min 1500 8,9 31 0,04 0,2 21 59 0,26 4,8
ADCS22WL max 4400 26,1 31 0,13 1,8 50,1 51,4 0,61 28,5
min 2100 12,0 27 0,05 0,4 29,7 59,4 0,36 11
ADCS25WL max 5000 28,2 29 0,13 2,2 57,3 51,6 0,70 39,6
min 2400 14,0 26 0,06 0,6 34,1 59,6 0,42 15,4
Supply water temperature: 70 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 70/50 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WL max 3200 18,5 35 0,13 1,5 28,2 43,8 0,34 8,4
min 1500 8,9 32 0,06 0,4 16,6 50,4 0,20 3,2
ADCS22WL max 4400 26,2 33 0,17 3,1 39,7 44,4 0,48 19,1
min 2100 12,5 28 0,07 0,7 23,6 51 0,29 7, 5
ADCS25WL max 5000 28,8 32 0,18 3,8 45,5 44,6 0,55 26,6
min 2400 13,7 27 0,08 0,9 27,2 51,2 0,33 10,6
Supply water temperature: 60 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 60/40 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WL max 3200 18,7 37 0,20 3,4 20,4 36,6 0,25 4,8
min 1500 8,8 32 0,08 0,6 12,1 41,5 0,15 1,9
ADCS22WL max 4400 24,9 35 0,24 5,7 29,1 37,4 0,35 11,2
min 2100 12,0 30 0,10 1,2 1 7, 5 42,4 0,21 4,5
ADCS25WL max 5000 28,9 35 0,28 8,1 33,5 37,6 0,41 15,8
min 2400 14,3 30 0,11 1,7 20,2 42,6 0,24 6,4
Supply water temperature: 55 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 55/35 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water
temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
ADCS17WL max 3200 18,9 39 0,3 6,5 16,3 32,9 0,20 3,3
min 1500 8,6 32 0,1 0,9 9,7 36,9 0,12 1,3
ADCS22WL max 4400 25,2 37 0,3 10,6 23,6 33,8 0,29 7, 9
min 2100 12,4 31 0,1 1,9 14,2 37,9 0,17 3,2
ADCS25WL max 5000 29,0 37 0,4 15,0 27,3 34 0,33 11,2
min 2400 13,9 30 0,1 2,3 16,5 38,2 0,20 4,6
*1) Recommended outlet air temperature for good comfort and optimized output.
*2) Nominal output at given supply and return water temperature.

AD Corinte W - ADCS
15
Type Output*7
[kW]
Airflow*3
[m3/h]
∆t*5,7
[°C]
Water
volume
[l]
Sound
level*4
[dB(A)]
Motor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
ADCS17WL*¹ 20 1500/3200 23/18 2,8 43/61 890 230V~ 3,9 1700 85
ADCS22WL 29 2100/4400 24/19 3,6 44/62 1230 230V~ 5,4 2200 110
ADCS25WL*² 33 2400/5000 24/19 4,0 45/63 1420 230V~ 6,2 2450 125
*1) Available only for horizontal mounting.
*2) Available only for vertical mounting.
*3) Lowest/highest airflow of totally 5 fan steps.
*4) Conditions: Distance to the unit 5 metres. Directional factor: 2. Equivalent absorption area: 200 m². At
lowest/highest airflow.
*5) ∆t = temperature rise of passing air at maximum heat output and lowest/highest airflow.
*6) Applicable at water temperature 80/60 °C, air temperature, in +18 °C.
*7) Applicable at water temperature 60/40 °C, air temperature, in +18 °C.
Protection class: IP20.
CE compliant.
Type Output*6
[kW]
Airflow*3
[m3/h]
∆t*5,6
[°C]
Water
volume
[l]
Sound
level*4
[dB(A)]
Motor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
ADCS17WH*¹ 26 1500/3200 31/24 2,8 43/61 890 230V~ 3,9 1700 85
ADCS22WH 35 2100/4400 30/23 3,6 44/62 1230 230V~ 5,4 2200 110
ADCS25WH*² 41 2400/5000 31/24 4,0 45/63 1420 230V~ 6,2 2450 125
Technical specifications
2Water heat - ADCS WH, coil for high temperature water (≥80 °C) (IP20)
2Water heat - ADCS WL, coil for low water temperature (<80 °C) (IP20)

AD Corinte W - ADCS
19
GB
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The guarantee is only valid if the units
are used in the manner intended by the
manufacturer and in accordance with the
Frico mounting and operating instructions.
Application
The AD Corinte W - ADCS air curtain is
supplied with a water coil and is intended
for permanent installation above or beside
entrance doors and other openings up to
3,5 metres in height. Protection class: IP20.
Operation
Air is drawn in at the top/rear of the unit and
blown out downwards/outwards so that it
shields the door opening and minimizes heat
loss. To achieve the optimum curtain effect
the unit must extend the full height/width of
the door opening.
The grille for directing exhaust air is
adjustable and is normally angled outwards to
achieve the best protection against incoming
cold air.
The efficiency of the air curtain depends
on the air temperature, pressure differences
across the doorway and any wind pressure.
NOTE! Negative pressure in the building
considerably reduces the efficiency of the air
curtain. The ventilation should therefore be
balanced.
Vertical mounting
The unit is mounted vertically on the floor
with the exhaust opening facing outwards.
Before installation, decide whether any
electrical connections or water connections
are to be made from below.
Leave the protective plastic in place during
installation. Take care to avoid damaging the
surfaces. For installation see Figure 4.
1.Remove the two screws that secure the
intake grille (A) and remove this.
2.Undo the screws holding the front panel (C)
on the exhuast side (B).
3.Undo the two screws in the front panel and
remove it.
4.Place the edging in level on the floor and
secure it through the countersunk holes
(see Fig. 7). Place the air curtain on the
edging.
5.A flat bar is included for securing the air
curtain. Fixate the air curtain through the
square-shaped hole. Make sure that the flat
bar is not bent when fixing.
6.Secure the top with an angle bracket or
similar to prevent the air curtain from
toppling over. There is a hole in the centre
of the top of the air curtain with an internal
M8 thread for securing the bracket.
7.Hook the front panel (C) onto the edge on
the intake side (A), close and press it into
the slot on the exhaust side (B).
8.Fasten the two screws in the front panel.
9.Secure the front panel on the exhaust side.
10. Replace the intake grille. (A)
To remove dirt and finger prints, polish the
panels with a suitable cleanser. Any print
that may be on the panels is removed with a
suitable solvent.
Horizontal mounting
The unit is mounted horizontally with the
outlet facing downwards. Do not remove
the protecting plastic until mounting is
completed. Be careful so the surfaces are not
damaged.
Mounting less than 180 mm from the ceiling
is not recommended since it will reduce the
flow through the unit.
Two brackets are delivered with the unit
for mounting on the wall or hanging from the
ceiling.
Horizontal mounting on the wall
1.Mount the brackets on the wall according to
measures in Fig. 6a and 6b.
2.Put the unit in place and lock it with an
hexagon key and the included M8 screws.
Mounting and operating instructions

AD Corinte W - ADCS
20
GB
Horizontal mounting on the ceiling
1.Mount pendulums or similar (not included
on delivery) on the ceiling with c-c distance
according to Fig. 6a and 6b.
2.Mount the brackets on the unit with an
hexagon key and the included M8 screws.
3. Put the unit in place and fix the brackets to
the pendulums.
Note! The unit needs to be secured if hung
from wires.
Electrical installation
The installation, which should be preceded by
an omnipolar switch with a contact separation
of at least 3 mm, should only be wired by a
competent electrician and in accordance with
the latest edition of IEE wiring regulations.
The electrical connection may be done from
above or below when mounted vertically, and
from left or right when mounted horizontally,
according to ordering key. Control (230V~)
should be connected to a terminal block.
The control system is pre-installed in the
aircurtain with an integrated control card,
(see fig 8).
SIRe is supplied pre-programmed with
quick-release connections.
Modular cables are connected to the control
board Base, by opening the front plate, as
shown in Figure 4 and 5. See manual for SIRe.
Connection of water coil
The air curtain has a heating coil with copper
tubes suitable for connection to a closed
water heating system. The heating coil must
not be connected to a mains pressure water
system or an open water system.
The unit is connected from above or below
to Ø22 mm copperpipes, by compression
fitting or through welding the pipe work to the
unit.
The upper side of the heating coil is
equipped with ventilating valve in the unit.
The heating coil should be ventilated before
operation to prevent air locks.
When mounting the unit vertically, water
connection can be carried out from the top or
bottom. The connection from below can be
done the following way:
• Flexible hoses may be drawn through
drilled holes in the floor and connected to
the air curtain pipes. The flexible hoses are
connected to the system beneath the floor.
Note! At connection from below, avoid placing
hoses or pipes so that they obstruct the air
flow to the fans. If necessary, secure them to
avoid vibrations and prevent them from being
sucked into the fans.
When mounting the unit horizontally, water
connection can be carried out from the left
or right. The lid on the top side of the unit
is sliding to be adjustable to the water pipe
dimension. (see Fig 6a).
Adjustment of air flow
The direction and speed of the air flow
should be adjusted considering the load on
the opening. Compressive forces affect the
air stream and make it bend inwards into the
premises (when the premises are heated and
the outdoor air is cold). The air stream should
therefore be directed outwards to withstand
the load. (Generally speaking, the higher the
load, the bigger the angle needed.)
With an hexagon key, loosen the three
screws supporting the outlet grille. Angle the
grille outwards to obstruct the incoming cold
air.
Overheating
The over heat protection maintains the
exhaust temperature at +40 °C. If the
temperature should exceed anyway there is
an over heating alarm. For more information
see the manual for SIRe.
Maintenance
To ensure performance and reliability of the
air curtain inspection should be carried out
regularly, at least twice a year, but this can
vary depending on local conditions. This is to
secure the performance of the air curtain.
A clogged filter doesn’t present a risk, but
will reduce the efficiency of the air curtain.
The inlet grille works as a filter and should
be vacuumed regularly. The water battery
should be cleaned when necessary in the
following way:
1.Disconnect the power supply.
2.Loosen the two screws of the air intake
grille with a hexagon key and remove the
grille.

AD Corinte W - ADCS
21
GB
3.Carefully wipe the fins of the heating coil
with a wet cloth.
4.Remount the air intake grllle.
5.Connect the power.
Filter cassettes, that the unit may be
equipped with, cannot be cleaned but need to
be changed when they are soiled or when the
airflow is reduced. The basic filter is cleaned
with water and a gentle cleaning agent.
Since fan motors and other components are
maintenance free, no maintenance other than
cleaning is necessary, undertake cleaning at
least twice a year.
Safety
• Ensure that the area around the intake
and exhaust grille is kept free from
material wich could prevent the air to flow
through the unit!
• During operation the surfaces of the unit
are hot!
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.

Art nr: 208033, 2017-02-28 CH/LE
Main office
Frico AB Tel: [phone]
Box 102
SE-433 22 Partille [email protected]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se