FRO­NIUS TransPocket 150 User manual

/ Perfect Welding / Solar Energy / Perfect Charging
/ Perfect Welding / Solar Energy / Perfect Charging
WELDING SETTINGS
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online. This document does not describe all the functions of the device. For a comple-
te description of the device, refer to the Operating Instructions.
42,0426,0216,EN 009-01082017
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Setting values:
Dynamic: 0 - 100 | Factory setting = 20
Welding current: TP 150 = 10 - 150 A /
TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)
SoftStart / HotStart function: 30 - 200 % | Factory setting = 130 %
Pulse welding: OFF / 0.5 - 100 Hz | Factory setting = OFF
TRANSPOCKET 150/180 TIG
Quick Guide
WELDING SETTINGS
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online. This document does not describe all the functions of the device. For a comple-
te description of the device, refer to the Operating Instructions.
42,0426,0216,EN 009-01082017
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Setting values:
Dynamic: 0 - 100 | Factory setting = 20
Welding current: TP 150 = 10 - 150 A /
TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)
SoftStart / HotStart function: 30 - 200 % | Factory setting = 130 %
Pulse welding: OFF / 0.5 - 100 Hz | Factory setting = OFF
TRANSPOCKET 150/180 TIG
Quick Guide
Operating Instructions:
Operating Instructions:

ACCESSING THE SETUP MENU
Setup menu
MMA welding
Setup menu
Cel electrodes
Setup menu
TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On* / OFF
Start ramp: On* / OFF
Break voltage: 25 - 90 V | 45 V*
Factory setting
Level 2 Setup menu
PARAMETERS FOR TIG WELDING
Operating mode: OFF / 2-step* / 4-step
Starting current: 1 - 200 % | 50 %*
Reduced current: 1 - 200 % | 50 %*
Final current: 1 - 100 % | 50%*
Gas post-ow time: 0.2 - 9.9* seconds
Comfort Stop sensitivity:
TP150 = OFF / 0.5 - 2.5 V | 1.6 V*
TP180 = OFF / 0.5 - 2.5 V | 1.5 V*
Break voltage: 12 - 22 V | 15 V*
Tacking function: OFF* / 0.1 - 5.0 seconds
Factory setting
Level 2 Setup menu
* factory setting
WELDING PARAMETERS IN THE LEVEL 2 SETUP MENU
Software version
Automatic switch-o: 5 - 60 minutes / OFF*
Fuse: 230 V = 10 A, 13 A, 16 A* /
120 V = 15 A, 16 A, 20 A*
Operating time: hours, minutes, seconds
Welding time: hours, minutes, seconds
ACCESSING THE SETUP MENU
Setup menu
MMA welding
Setup menu
Cel electrodes
Setup menu
TIG
CHANGING WELDING PARAMETERS
Turn and press the adjusting dial to select and change parameters.
PARAMETERS FOR MMA WELDING
Starting current duration: 0.1 - 1.5 seconds |
0.5 seconds*
Anti-stick: On* / OFF
Start ramp: On* / OFF
Break voltage: 25 - 90 V | 45 V*
Factory setting
Level 2 Setup menu
PARAMETERS FOR TIG WELDING
Operating mode: OFF / 2-step* / 4-step
Starting current: 1 - 200 % | 50 %*
Reduced current: 1 - 200 % | 50 %*
Final current: 1 - 100 % | 50%*
Gas post-ow time: 0.2 - 9.9* seconds
Comfort Stop sensitivity:
TP150 = OFF / 0.5 - 2.5 V | 1.6 V*
TP180 = OFF / 0.5 - 2.5 V | 1.5 V*
Break voltage: 12 - 22 V | 15 V*
Tacking function: OFF* / 0.1 - 5.0 seconds
Factory setting
Level 2 Setup menu
* factory setting
WELDING PARAMETERS IN THE LEVEL 2 SETUP MENU
Software version
Automatic switch-o: 5 - 60 minutes / OFF*
Fuse: 230 V = 10 A, 13 A, 16 A* /
120 V = 15 A, 16 A, 20 A*
Operating time: hours, minutes, seconds
Welding time: hours, minutes, seconds