FRO­NIUS TransPocket 150 User manual

Transpocket 150/180
Quick reference
42,0426,0214,EN
Before carrying out any work with the device, ensure that you have read and understood all the documents provided as well as those
available online! This document does not describe all the functions of the device. For a complete description of the device, refer to
the Operating Instructions.
Safety
012-26012022
Operating Instructions
i
Setting values:
Arc-force dynamic: 0 - 100 | factory setting = 20
Welding current: TP 150 = 10 - 150 A /
TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)
SoftStart / HotStart function: 1 - 200% |factory setting = 130%
Pulse welding (only available for MMA welding):
OFF / 0.5 - 990 Hz | Factory setting = OFF
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
https://manuals.fronius.com/
html/4204260203
Welding settings

Accessing the setup menu
Changing welding parametersParameters for MMA welding
Parameters for TIG welding Welding parameters in the level 2 Setup menu
Setup menu
MMA welding
Setup menu
Cel electrodes
Setup menu
TIG
Turn and press the adjusting dial to select
and change parameters.
Comfort Stop sensitivity:
TP150 = OFF / 0,6 - 3,5 V | 1,5 V*
TP180 = OFF / 0,6 - 3,5 V | 1,5 V*
Break voltage: 10 - 45 V | 35 V*
Factory setting
Level 2 Setup menu
Software version
Automatic switch-off : 5 - 60 minutes/OFF*
Fuse: 230 V = 10 A, 13 A, 16 A* /
120 V = 15 A, 16 A, 20 A*
Operating time: hours, minutes, seconds
Welding time: hours, minutes, seconds
Starting current duration: 0.1 - 1.5 seconds | 0.5 seconds*
Anti-Stick: On* / OFF
Start ramp: On* / OFF
Break voltage: 25 - 90 V | 45 V*
Factory setting
Level 2 Setup menu
*Factory setting