FUFU & GAGA KF200151 User manual

Sideboard
Version:06/08/2022 1/18

please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
2/18

When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
3/18
A x 48 B x 48
6 x 35 mm
4 x 50 mm
C x 20 D x 10
15 x 9 mm 3 x 12 mm
3 x 14 mm
8 x 30 mm
E x 60
4 x 35 mm
S x 2
4 x 14 mm
R x 2Q x 4
6 x 30 mm
CL x 6 DR x 6 DL x 6 P x 2
F x 6 J x 5 H x 8 M x 8
G x 35
4 x 30 mm
CR x 6

4/18
3
1
5
4
5
8
7
7
2
6
6
69
9
9
9
6
11
16
16
16
10
12
12
13
10
13
15
15
15
14
14

1
CR x 3 CL x 3
1
6 x 35 mm
A x 4
5/18
E x 18
3 x 12 mm
E
E
E
E
E
E
E
CR
CR
CR
EA
A
A
A
CL E
E
CL E
E
CL
180
E
E
E
E
E
E
3
3
E
CL
A
Fix slide rail(CL) and (CR)to both side of
No.3 plate with screw(E) as shown.
Insert quickfit screw(A) into both side of
No.3 plate as shown.
Please pay attention to the holes where
the accessories are inserted and don't
use an electric screwdriver
or use force to rotate,
may cause crack.

2
6/18
CR x 3 CL x 3
6 x 35 mm
A x 8 E x 18
3 x 12 mm
2
4
A
A
A
AA
AA
A
E
E
E
E
E
E
E
E
E
E
E
E
CR
CR
CR
CL
CL
CL
E
E
E
E
E
E
A
E
CL
Fix slide rail(CL) and (CR)to No.2, No.4
plates with screw(E) as shown.
Insert quickfit screw(A) into No.2, No.4
plates as shown.
Please pay attention to the holes where
the accessories are inserted and don't
use an electric screwdriver
or use force to rotate,
may cause crack.

3
D x 2
7/18
4 x 35 mm
8
3
D
D
D
Attach No.8 to No.3 plate with screw(D) as shown.

4
8/18
B x 4 C x 4
15 x 9 mm 8 x 30 mm
IIIIII
B
6
6
6
6
B
B
B
B
C
C
C
C
Attach No.6 to No.3 plate with wooden
dowel(C)and turn cam locks(B)clockwise
to tighten as shown.

5
B x 8
9/18
C x 4
15 x 9 mm 8 x 30 mm
IIIIII
B
B
C
B
C
B
B
B
B
B
B
C
C
4
2
Connect No.2 and No.4 plates to the
component with wooden dowel(C)and
turn cam locks(B)clockwise to tighten
as shown.

6
10/18
A x 6 F x 6
4 x 50 mm
7
7
7
1
A
F
5
5
F
F
F
F
F
F A
A
A
A
A
A
6 x 35 mm
Insert No.7 plate into available slots as shown.
Attach No.5 to No.1 plate with screw(F)
as shown.
Insert quickfit screw(A) into No.1 plate
as shown.
Please pay attention to the holes where
the accessories are inserted.

8
11/18
B x 6 C x 6
15 x 9 mm 8 x 30 mm
1
IIIIII
B
C
C
B
B
B
B
B
B
C
C
C
C
Cover No.1 plate to the component with
wooden dowel(C) and turn cam locks(B)
clockwise to tighten as shown.

9
12/18
J x 5 Gx 5
4 x 30 mm
8 x 30 mm
11
11
D
G
J
D x 6 C x 6
10
4 x 35 mm
G
J G
G
J
J
G
J G
J
D
D
D
D
D
D
C
C
C
C
C
C
Fix part(J) into No.11 plate with screw(G)
as shown.
Cover No.11 plate to the component
with wooden dowel(C) at first, then
use screw(D) to fix as shown.

11
13/18
E x 24 DR x 6 DL x 6
3 x 12 mm
9
12
10
9
G x 30
12
4 x 30 mm
DL
DR
E
E
E
G
E
E
x6
14
10
G
G
G
G
G
x6
Fix slide rail(DL) and (DR)to No.9, No.10
plates with screw(E) as shown.
Attach No.9, No.10 and No.14 to No.12
plate with screw(G)as shown.

13
A x 15
14/18
B x 15
15 x 9 mm6 x 35 mm
13
16
A
IIIIII
x3
16
B
B
B
A
A
A
B
B
A
A
B
Insert No.13 plate into available slots
as shown.
Insert quickfit screw(A) into No.16 plate
as shown.
Attach No.16 plate to the component
and turn cam locks(B)clockwise to
tighten as shown.

14
15/18
15
13
15
IIIIII
x3
A x 15 B x 15
15 x 9 mm6 x 35 mm
B
A
B
B
B
AA
A
A
A
B
B
Insert quickfit screw(A) into No.15 plate
as shown.
Attach No.15 plate to the component
and turn cam locks(B)clockwise to
tighten as shown.

15
16/18
16
15
16
15
16
15
Align rails, put all drawers.

16
17/18
H x 8 M x 8
3 x 14 mm
P x 2 Q x 2 S x 2
4 x 14 mm
S
Q
P
H
M
S
QP
S
M
H
MH
M
M
M
H
H
H
M
H
H
M
M
H
QP

17
D x 2
18/18
Q x 2 R x 2
4 x 35 mm 6 x 30 mm
Q
D
R
Q
D
R
P
Q
D

WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY

CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please call us.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS